Indexing Plungers（Page 5）

?* Information on days to ship and prices

• 

  Cam action indexing plungers, Zinc die casting

  GANTER

  Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The notch allows safe positioning.
  These cam action indexing plungers made of die-cast zinc are very reasonably priced design versions.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.80 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Indexing plungers with rest position, Steel / Plastic knob

  GANTER

  Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
  A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers without thread, Steel / Plastic knob

  GANTER

  Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
  Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Plunger Stainless Steel

  GANTER

  Stainless Steel-Indexing plungers GN 608.5 are distinguished for their small dimensions.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel / Plastic-knob / with rest position

  GANTER

  Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, with rest position, Plunger Stainless Steel

  GANTER

  Indexing plungers GN 608.6 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Indexing plungers GN 608.6 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.80 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Locking plungers, Plunger protruded

  GANTER

  If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.
  The shape of the cam curve secures the plunger against accidental operation.
  When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
  For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Cam action indexing plungers for welding

  GANTER

  Stainless Steel-Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
  The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.90 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Cam action indexing plungers, without locking function

  GANTER

  For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
  When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers / without rest position / GN 613

  GANTER

  The indexing plungers GN 613 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator, GN 817 indexing plungers are to be preferred.
  A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.78 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers with long plastic knob

  GANTER

  Stainless Steel-Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
  Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without rest position

  GANTER

  GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Mini indexing plungers, with and without rest position

  GANTER

  Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.
  The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.
  In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  PMT.100 - Indexing plungers -SUPER-technopolymer body

  ELESA

  Indexing plungers with threaded body in glass fibre reinforced polyamide-based SUPER-technopolymer, plunger in hardened and burnished steel or AISI 303 stainless steel, knob in high-resilience polyamide-based technopolymer in black or red RAL 3000, spring in stainless steel AISI 302 and locking nut in glass fibre reinforced polyamide-based SUPER-technopolymer.
  Thanks to the low coefficient of friction of the material, the application of lubricating grease is not required.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  PMT.110 - Indexing plungers -SUPER-technopolymer body

  ELESA

  Indexing plungers with glass-fibre reinforced polyamide based SUPER-technopolymer threaded body, black-oxide hardened steel or AISI 303 stainless steel plunger, high-resilience polyamide based technopolymer knob, grey-black colour, AISI 302 stainless steel spring and glass-fibre reinforced polyamide based SUPER-technopolymer locking nut.
  Thanks to the low coefficient of friction of the material, the application of lubricating grease is not required.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plungers, with rapid locking head

  HALDER

  Index plungers are used for indexing bores.
  
  [Operation]
  The locking pin is drawn in and locked by pulling the knob. The projecting red press button indicates the locking position (locking pin drawn in). Pushing the red press button causes the locking pin to jump back into the locking position.

  Select to compare

  Configure now
  Starting from∗ ：	19.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Index Plungers, with release lock

  HALDER

  Index plungers are used for indexing bores.
  
  [Operation]
  Actuate the red press button, and hold it in the pressed position. Only then can the locking pin be drawn in by pulling the knob.

  Select to compare

  Configure now
  Starting from∗ ：	15.42 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Mounting Blocks, for index bolts and index plungers, die-cast

  HALDER

  Assembly support and extended applications for index bolts and index plungers. Also to be used as a seat for locating bushings EH 22110.

  Select to compare

  Configure now
  Starting from∗ ：	5.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Positioning Bushings, for index bolts and index plungers

  HALDER

  Positioning bushings are suitable for index plungers and index bolts.
  Low wear thanks to hardened running ball.

  Select to compare

  Configure now
  Starting from∗ ：	6.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers with red knob / GN 8170

  GANTER

  [Specifications]
  ・Type: B. without rest position, C. with rest position
  ・Material (Sealing ring): H. H-NBR
  
  Stainless steel indexing plungers GN 8170 are intended for use in hygienic areas and meet hygiene requirements on the knob side (front hygiene). Wipers between the knob and the guide as well as the sealing ring between the guide and the housing keep the locking mechanism on the knob side leak-tight. At the same time, the high surface quality (Ra < 0,8 um) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	84.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Indexing plunger with status sensor, Form A (K1495)

  KIPP

  · No interference contours
  
  · Intelligent battery management enables long runtime
  
  · Elimination of complex cabling
  
  · Wireless transmission of the actuation status

  Select to compare

  Configure now
  Starting from∗ ：	130.39 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plunger with status sensor, Form B (K1495)

  KIPP

  · No interference contours
  
  · Intelligent battery management enables long runtime
  
  · Elimination of complex cabling
  
  · Wireless transmission of the actuation status

  Select to compare

  Configure now
  Starting from∗ ：	130.39 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers - Premium with cylindrical pin, Form D (K0736)

  KIPP

  · Higher processing requirements
  
  · Centring on the threaded sleeve for positioning accuracy
  
  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.26 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers - Premium with tapered pin, Form D (K0736)

  KIPP

  · Higher processing requirements
  
  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers for thin-walled parts Form C (K0735)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use, sheet metal constructions
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.20 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form B (K0339)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.76 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form F (K0341)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers pneumatic (K1116)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology
  
  · High stability
  
  · Automatable
  
  · Application temperature: -20 °C to +80 °C

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	68.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers stainless steel Form A (K0632)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Stainless steel 1.4305, 1.4034, 1.4404

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.03 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers stainless steel Form B (K0632)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Stainless steel 1.4305, 1.4034, 1.4404

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.09 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers stainless steel Form C (K0632)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Stainless steel 1.4305, 1.4034, 1.4404

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers stainless steel without collar Form H (K0344)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers with extended pin Form B (K0630)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers with grip stainless steel Form A (K0637)

  KIPP

  · Can be used for all types of locking and fixating
  
  · The lock is released by turning the grip 180°
  
  · Indexing notch for holding the position

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers with locked mark, Form A (K1149)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Lock markings as a visual aid for the desired engaged position

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers without collar Form T (K0635)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Key ring to operate the indexing plungers
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers, short version, Form B (K0631)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Ideal where space is restricted:
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers, short version, Form B (K0748)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Ideal where space is restricted:
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision indexing plungers with straight indexing pin, Form A, standard (K0361)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Quick positioning and fixating
  
  · High stability
  
  · High repeat accuracy

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	76.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision indexing plungers with tapered indexing pin, Form B, lockable (K0359)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Quick positioning and fixating
  
  · High stability
  
  · High repeat accuracy

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	92.63 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Index Plungers, with hexagon collar and locking, stainless steel A4

  HALDER

  Material

  Body

  • Stainless steel 1.4401
  

  Locking pin

  • Stainless steel 1.4401 nickel-plated
  

  Knob

  • Thermoplastic PA 6, black-grey, matt
  

  • Stainless steel 1.4401
  

  Lock nut

  • Stainless steel 1.4401
  

  Notes

  Knob not removable.

  Lock nuts have to be purchased separately.

  Select to compare

  Configure now
  Starting from∗ ：	19.69 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Indexing plungers, steel or stainless steel with plastic mushroom grip and extended indexing pin (03089)

  NORELEM

  · Indexing plungers facilitate indexing and locking
  
  · High stability
  
  · Material: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	8.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers, stainless steel with stainless steel mushroom grip. Locking slot and locknut (03089)

  NORELEM

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Stainless steel 1.4305, 1.4034

  Select to compare

  Configure now
  Starting from∗ ：	25.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers, steel or stainless steel with plastic T-grip (03090)

  NORELEM

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Ergonomic grip
  
  · Material: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	9.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers, steel or stainless steel with plastic mushroom grip (03089)

  NORELEM

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Easy handling
  
  · Material: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	8.32 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...