Guide Elements（Page 3）

?* Information on days to ship and prices

• 

  Consoles

  HALDER

  [Specifications]
  ・Material: Grey cast iron, phosphatized
  ・b(mm): 78, 98
  ・d1(mm):12, 16
  ・d2(mm): M12, M16

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,293.86 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Fixing screws for clamping bars

  HALDER

  [Specifications]
  ・l1(mm): 100~700
  ・n2: 1~7
  
  Fixing screws for clamping bars.

  Select to compare

  Configure now
  Starting from∗ ：	23.44 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Floating Clamps, compact construction, separate clamping and locking M 12

  HALDER

  Floating clamps with separate clamp and locking are used to clamp and support
  additional clamping points
  on extremly pliable
  workpieces. Both, clamping and supporting force can individually be designed.
  The benefits of the floating clamp are:
  avoids vibration during the processing. clamps ribs, beads and shackles to reinforce clamped components. distortion-free clamping of raw parts. compact version with reduced height.

  Select to compare

  Configure now
  Starting from∗ ：	1,091.69 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Strips, reversible

  HALDER

  Gripper strip can be reversed for mounting on the five-sided machining jaw (4 of them are required). For clamping unmachined parts close to the edge, 3 or 5 mm. Incl. 2 mounting screws M 6 x 16 each (Art. No. 1704.600).

  Select to compare

  Configure now
  Starting from∗ ：	153.12 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Studs

  HALDER

  Gripper stud for universal gripper set (Art. No. 1702.600).

  Select to compare

  Configure now
  Starting from∗ ：	35.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Studs, low

  HALDER

  For clamping unmachined parts. Least possible lost clamping margin. Clamping height: adjustable from 3.0 to 4.5 mm.

  Select to compare

  Configure now
  Starting from∗ ：	56.13 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Studs, pointed

  HALDER

  For clamping unmachined parts. Least possible lost clamping margin. Clamping height: adjustable from 4.5 to 6.0 mm.

  Select to compare

  Configure now
  Starting from∗ ：	56.13 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Studs, smooth

  HALDER

  With carbide coating for clamping pre-machined or hardened workpieces.

  Select to compare

  Configure now
  Starting from∗ ：	63.23 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Insertable Plates

  HALDER

  Three support heights. For levelling the workpiece on the five-sided machining jaws. Ground to high accuracy. Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600). This product is supplied as a pair.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	176.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Intermediate Elements

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・System: V70
  
  Intermediate Elements.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	367.08 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Intermediate Plates / Steel, case-hardened, ground / V40, V70

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・d1(mm): 40, 56
  ・System: V40, V70
  
  T-Slot Systems Mounting Elements, Intermediate Plates EH 1047.700-EH 1147.700

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	136.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Jaws for Five-Sided Machining Sets

  HALDER

  Pull-down elements suitable for clamping and pulling unmachined clamping surfaces down onto the guideway or onto the 90-mm support plates supplied. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the support plates largely reduces vibrations in the workpiece.
  Supplied in handycase consisting of:
  4 x wedge adapters for five-sided machining jaw (Art. No. 1704.410)
  4 x wedge elements, four-point (Art. No. 1703.340)
  4 x wedge elements, Microgripper (Art. No. 1703.350)
  2 x insertable plates (h1=90 mm) (Art. No. 1704.520)
  20 x cheese-head screws M 6 x 8 (Art. No. 1704.600)

  Select to compare

  Configure now
  Starting from∗ ：	1,436.66 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Jaws for Five-Sided Machining / Jaw

  HALDER

  Particularly suitable for five-side machining. Better accessibility for tools. Ground clamping surfaces. Additional thread for parallels. Accuracy through pull-down. Stability through form-locking.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	742.97 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Jaws, soft

  HALDER

  For self-made special jaws. Chamfer provides very good accessibility to the workpiece.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	198.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lateral Stops / Steel / M6

  HALDER

  [Specifications]
  ・Material: Steel
  ・d1: M6
  
  The stop can be mounted on both sides of the clamping bar.

  Select to compare

  Configure now
  Starting from∗ ：	42.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locating Segments

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・b1(mm): 10, 14
  ・b2(mm): 20, 34
  
  The stop can be mounted on both sides of the clamping bar.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	268.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Mounting Screws, for jaws

  HALDER

  [Specifications]
  ・Material: Steel, tempered
  ・d(mm): M10
  ・l(mm): 23
  
  Mounting Screws, for jaws EH 1701.

  Select to compare

  Configure now
  Starting from∗ ：	8.43 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Mounting Screws, for jaws for five-sided machining

  HALDER

  For mounting the wedge adapters on the five-sided machining jaws as well as for mounting the insertable plates on the five-sided machining jaws.

  Select to compare

  Configure now
  Starting from∗ ：	2.82 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  T-Wrenches

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened
  ・l1(mm): 210, 250
  ・l2(mm): 105, 125
  ・System: V40, V70
  
  Wrenches EH 1032.100-EH 1132.100

  Select to compare

  Configure now
  Starting from∗ ：	48.72 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Step Jaws

  HALDER

  Top face and side face, with thread for mounting of parallel jaws. Ground clamping surfaces. Additional threads for parallels and for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the smooth side. Mountings for click system (Art. No. 1701.190-1701.200) on both sides of the jaw.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	360.93 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Multi-Vices, MS 125

  HALDER

  Scope of application:
  Can be applied horizontally and vertically - therefore suitable for vertical and horizontal CNC milling machines. Conventional clamping, gripper clamping or pull-down clamping are all possible. MS 125-S - ideal for use on five-axis machining centres. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece. With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically.
  Product features:
  High versatility - the modular clamping system combines practically all the possibilities of our tried-and-tested models. High-pressure spindle with power intensification - clamping force does not slacken. Enlarged clamping span for secure clamping of unmachined parts. Lost clamping margin 8 mm with pull-down clamping, 3 mm with gripp clamping. Clamping with torque wrench (max. 30 Nm) - this makes it possible to work above the table with an unfavourable clamping arrangement on the tool.
  Scope of supply:
  1 high-pressure vice without jaws. 1 set of side clamps. 3 socket screw wrenches. Hexagonal insert for torque wrench 3/8"
  Please order the clamping jaws separately.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,749.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Multi-Vices, MS 125eco

  HALDER

  The all-round clamping system is a classic for conventional clamping and gripp clamping. It is suitable for all common milling. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece.
  The MS 125eco is designed for fast machining of unmachined/semi-finished parts as well as of finished products. It is equally suitable for gripp clamping in the first clamping as well as for conventional clamping in the second clamping without refitting. ground jaws for high precision in the machining of workpieces. high-pressure spindle with mechanical power intensifier (operation with torque wrench). up to 40 kN clamping force (linearly increasing, at max. 30 Nm). solid base made of GGG 60, top and bottom surface ground. threats M8 on both sides for workpiece stop. precise alignment slots in the ground bottom surface for an optimal alignment on the machine table
  Scope of supply:
  1 piece MS 125eco. 1 set step jaws for gripper studs. 4 pieces gripper studs, pointed. 4 pieces clamping elements. 3 pieces wrenches
  All components of the product ranges "conventional clamping" and "gripp clamping" as well as the accessories for the Multi-Vice MS 125 are fully compatible to MS 125eco. For horizontal machining Halder basic elements (angles/cubes) can be used.

  Select to compare

  Configure now
  Starting from∗ ：	2,340.67 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Pivot Jaws, movable / Jaw, movable

  HALDER

  One side smooth and ground, the other side ribbed. 360° swivel. Use together with hardened base jaws (Art. No. 1701.120). Suitable for mounting of swap-on parallels (Art. No. 1701.190 - 1701.200).

  Select to compare

  Configure now
  Starting from∗ ：	692.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Positioning Clamping Bars, two-sided

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・b1(mm): 10, 14
  ・b2(mm): 20, 30
  ・System: V40, V70
  
  Positioning Clamping Bars, two-sided EH 1049.200-EH 1149.200

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	310.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Prismatic Jaws

  HALDER

  For horizontal and vertical clamping of round and flat workpieces. Please order mounting screws separately (Art. No. 1701.300). This product is supplied as a two piece.

  Select to compare

  Configure now
  Starting from∗ ：	605.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Pull-Down Sets, high

  HALDER

  Pull-down elements are suitable for clamping and pulling down clamping surfaces that are unmachined or pre-machined onto the guideway or onto the supplied clamping bolts. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the clamping bolts largely reduces vibrations in the workpiece
  Supplied in handycase consisting of:
  4 x wedge adapters, high (Art. No. 1703.310). 4 x bolts, high M 10 x 45 mm (Art. No. 1703.330). 4 x wedge elements, 4 point (Art. No. 1703.340). 4 x wedge elements, Microgripper (Art. No. 1703.350). 4 x clamping bolts 48 mm (Art. No. 1703.440). 4 x clamping bolts 34 mm (Art. No. 1703.420).

  Select to compare

  Configure now
  Starting from∗ ：	1,652.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Pull-Down Sets, low

  HALDER

  Pull-down elements are suitable for clamping and pulling down clamping surfaces that are unmachined or pre-machined onto the guideway or onto the supplied clamping bolts. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the clamping bolts largely reduces vibrations in the workpiece
  Supplied in handycase consisting of:
  4 x wedge adapter, low (Art. No. 1703.300). 4 x bolts, low M 10 x 30 mm (Art. No. 1703.320). 4 x wedge element, 4 point (Art. No. 1703.340). 4 x wedge element Microgripper (Art. No. 1703.350). 4 x clamping bolts 23 mm (Art. No. 1703.400). 4 x clamping bolts 34 mm (Art. No. 1703.420).

  Select to compare

  Configure now
  Starting from∗ ：	1,516.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Screw Plugs

  HALDER

  [Specifications]
  ・Material: Plastic
  ・d(mm): M12, M16
  ・l1(mm): 25, 30
  ・System: L12, L16
  
  Screw Plugs EH 1557.000-EH 1657.000

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.95 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Seating Pins

  HALDER

  Five support heights. For levelling the workpiece on the guideway. Ground to high accuracy.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	70.22 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Snap-on Parallels, click

  HALDER

  For accurate height setting of workpiece
  Height ground. Snap-on, with screw mounting
  For the high sides of the jaws
  Supplied as pair.

  Select to compare

  Configure now
  Starting from∗ ：	182.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Spacers

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・d1(mm): 8.5, 13
  ・d2(mm): 24, 39.5, 59.5
  ・System: L12, V40
  
  This mounting element is a system part of the T-slot system.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spacers, for the L-12 hole and dowel system

  HALDER

  For the L-12 hole and dowel system the disks 1107.400 - 1108.300 are used.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Standard Ranges EH 1586

  HALDER

  [Features]
  ・1586.410: Flexible 3-sided machining.You can machine up to 4 workpieces at once
  ・1586.411: Two ranges of 1586.410. Particularly well suited for machining long workpieces
  ・1586.412: Flexible 3-sided machining. 1-2 workpieces can be machined at the same time
  ・1586.413: Flexible 3-sided machining. Particularly well suited for machining long workpieces
  ・1586.414: For machining large workpieces
  ・1586.415: For machining cylindrical workpieces. 4 workpieces can be machined at the same time
  ・1586.416:For machining large workpieces. Including supports with a height of 15 mm

  Select to compare

  Configure now
  Starting from∗ ：	941.07 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Step Jaws, for horizontal clamping of flat workpieces

  HALDER

  For horizontal clamping of flat workpieces. Please order mounting screws separately (Art. No. 1701.300).
  This product is supplied as a pair.

  Select to compare

  Configure now
  Starting from∗ ：	327.23 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Stops / Steel, case-hardened, ground / V70

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・h1(mm): 37, 57
  ・System: V70
  
  T-Slot Systems Mounting Elements, Stops EH 1116.000-EH 1116.100

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	80.64 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Stops, diamond coated

  HALDER

  [Specifications]
  ・Body: Tool steel, hardened
  ・Pin: Diamond coating
  ・l1(mm): 42, 44
  ・l2(mm): 20
  
  Stops, diamond coated EH 1586.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	202.66 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Stops, Gripper Studs

  HALDER

  Gripper insert consists of two pins from HSS, when clamped they penetrate into the workpiece surface and may leave residual marks.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	206.67 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Stops, horizontal prisms

  HALDER

  [Specifications]
  ・Body: Tool steel, hardened
  ・b1(mm): 44
  ・h1(mm): 21.4
  ・l2(mm): 20
  
  Stops, horizontal prisms EH 1586.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	168.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Stops, ribbed

  HALDER

  [Specifications]
  ・Body: Tool steel, hardened
  ・Pin: Hard metal
  ・b1(mm): 44
  ・b2(mm): 24
  
  Stops, ribbed EH 1586.060

  Select to compare

  Configure now
  Starting from∗ ：	258.97 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Stops, soft

  HALDER

  The chucks can be machined to the needed workpiece contour.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	144.20 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Stops, with mounting thread

  HALDER

  [Specifications]
  ・Body: Tool steel, hardened
  ・Pin: Hard metal
  ・b1(mm): 44
  ・h1(mm): 21.4
  
  Stops, with mounting thread EH 1586.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	148.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Support Clamping Bars

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・b1(mm): 25, 40
  ・b2(mm): 8.5, 13
  ・System: L12, V40, V70
  
  Support Clamping Bars

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	108.24 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wrenches

  HALDER

  [Specifications]
  ・Material: Heat-treated steel, heat treated
  ・l(mm): 295, 300
  ・System: V70
  
  Wrenches EH 1139.400-EH 1139.500

  Select to compare

  Configure now
  Starting from∗ ：	23.13 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Support Jaws, for mounting various pull-down wedge element

  HALDER

  For mounting various pull-down wedge elements (Art. No. 1703.300-1703.400), universal gripper (Art. No. 1702.600) sets and gripper studs (Art. No. 1702.710-1702.780). Front surface can be used as clamping surface (hardened and ground)
  Support jaw, mobile,oscillating (Art. No. 1702.200) For clamping uneven workpieces. To compensate for non-parallel clamping surfaces
  Supplied without wedge elements, gripper set and gripper studs.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	661.38 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Support Jaws, for mounting various gripper studs

  HALDER

  For mounting various gripper studs (Art. No. 1702.710-1702.780) or a universal gripper set (Art. No. 1702.600). For three-point clamping. Front surface can be used as clamping surface (hardened and ground)
  Supplied without gripper studs or gripper sets.

  Select to compare

  Configure now
  Starting from∗ ：	584.20 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...