Base（Page 2）

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

• 

  Carrier for Bases

  SURUGA SEIKI

  A carrier for A10 connections. Used for fixing optical benches to bases such as those on optical surface plates etc. A magnet plate may be required depending on the base. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	115.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Post Fork

  SURUGA SEIKI

  A tool for fixing posts. Lightly secure by hand and then, after finely positioning, tighten with a hex wrench. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Post Base

  SURUGA SEIKI

  [Features]
  · A pedestal for posts.
  · Can be used, even when attached to a rod stand.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carrier for Mini-Optical Benches

  SURUGA SEIKI

  [Features]
  · A carrier for A16 optical benches.
  · For loads applied onto the optical bench carrier, as a general rule, avoid unbalanced or concentrated loads and ensure that it is equal to or less than 20 times the weight of the carrier itself.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rod Stand

  SURUGA SEIKI

  A stand used for adjusting the height of holders, etc. Rods can be securely fixed in place using two wire contacts and the point contact for the clamp screw. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Upward / Downward Micro Movement Rod Stand

  SURUGA SEIKI

  [Features]
  · A rod stand capable of upward and downward micro movements.
  · After fixing the rod with the rod fixing knob, the rod can be moved upward and downward in fine increments by rotating the knurled adjustment knob.
  · After adjusting, fix using the vertical fixing clamps.
  · The range for micro movements is 10 mm.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	136.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Intermediate Ring

  SURUGA SEIKI

  A part used for rod stands. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Positioning Plate

  SURUGA SEIKI

  A positioning plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carrier for Optical Benches

  SURUGA SEIKI

  A carrier for the A10.
  
  [Features]
  · A carrier for optical benches.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	108.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Base for Optical Circuit Switching

  SURUGA SEIKI

  [Features]
  · Can be used for switching optical circuits by loading and sliding the Opt Station holder (reproducibility reference value: 10 seconds or so).
  · The slide-position is fixed by magnet. As such there is no locking mechanism.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	209.19 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Spacer □ 40 for Optical Axis Height Alignment

  SURUGA SEIKI

  [Features]
  · A 40 mm spacer for aligning the optical axis.
  · Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc.
  · Features external dimensions of 40 × 40 mm. Can be used for 40 stages or Opt Station holders.
  · Available in dimensions of 10 mm to 50 mm in increments of 5 mm (by combining spacers).
  · More detailed adjustment is possible by using combinations of A50-H, R, J, V, W, X, and Y.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.22 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spacer □ 60 for Optical Axis Height Alignment

  SURUGA SEIKI

  A spacer for aligning the optical axis. Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.38 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotation Type (Handle Type) Cross Clamp

  SURUGA SEIKI

  [Features]
  · A cross clamp for heavy loads.
  · Poles and rods can be rotated to any angle and then fixed.
  · Fixing is done using a split clamping method.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.
  · There are three types available for different combinations of applicable diameters.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	136.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotation Type (Hexagonal Type) Cross Clamp

  SURUGA SEIKI

  [Features]
  · A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.
  · Poles and rods can be rotated to any angle and then fixed.
  · Fixing is done using a split clamping method.
  · Fixing is done by tightening the M5 bolts.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	124.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixed Type (Handle Type) Cross Clamp

  SURUGA SEIKI

  [Features]
  · A cross clamp for heavy loads.
  · Poles or rods can be orthogonally connected.
  · Fixing is done using split clamping.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.
  · There are three types available for different combinations of applicable diameters.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	109.17 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Fixed Type Cross Clamp

  SURUGA SEIKI

  A cross clamp for orthogonally connecting poles or rods. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.56 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Universal Base Plate

  SURUGA SEIKI

  A base plate for placing rod stands onto vibration removal boards at any position. Fixes to vibration removal boards using the included clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	68.44 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Conversion Spacer

  CHUO PRECISION INDUSTRIAL

  Spacers use a M16P1 screw on the stage, and are for using M6 counterbore holes in an M4 counterbore hole.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Fixed Type Cross Clamp

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used to retain holder shafts and poles orthogonally (at 90°) to each other.
  · Available with three diameters; ø8 mm, 12 mm, and ø20 mm. Products are available combining different diameters.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Aluminum Breadboard

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A simple type aluminum laboratory table.
  · Because of its small size, devices and optical type systems can be moved while assembled.
  · The top surface has M4 tapped holes at a pitch of 25 mm as standard.
  · Includes a handle for transportation

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	541.13 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  Base Plate

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used for mounting stages, holders, poles, and other similar items to surface plates with M6 tapped holes.
  · Base plate fixing screws (S-05) can be used for fixing to the surface plate.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Base Retainer

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used for mounting stages, holders, poles, and other similar items to surface plates with M6 tapped holes.
  · Use the M16P1 screw to mount the stands such as the ES-12/ES-20. The stage can be mounted using M4 screws.
  · A base plate fixing screw (S-05) can be used for fixing to surface plates.
  · BH-1 can fix base plates in any direction.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Base Plate Fixing Screw【10 Pieces Per Package】

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Can be used for fixing to surface plates.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.94 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Shaft for Cameras 1 / 4 Inch

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A stainless steel shaft with a diameter of ø20 mm and tripod screw (nominal size 1/4").

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stand ø20

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Fixes the shaft of various holders such as a mirror holder.
  · Each fixing height (depth) is available for all shaft diameters (ø8 mm, ø12 mm, and ø20 mm).
  · Clamp screws are used to fix the shaft. Can be fixed in any direction from any of the three points.
  · Equipped as standard with a collar (thickness: 10 mm) which can be used for changing direction while maintaining a fixed height.
  · Clamp screws are provided in two locations (top and bottom) for products with an overall length of 80 mm or more. This helps increase the holding strength.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pole ø12

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An extendable, non-magnetic stainless steel pole with a male thread and tapped holes. (PL-12-300M cannot be extended.)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pole ø20

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An extendable, non-magnetic stainless steel pole with a male thread and tapped holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	35.37 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  GN 191 T-angle connector clamps, Aluminium

  GANTER

  The clamping bores of GN 191 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Angle connector clamps

  GANTER

  The clamping bores of the angle connector clamps GN 196 are specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.18 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Flanged two-way connector clamps, multi part assembly

  GANTER

  The clamping bores of the flanged two-way connector clamps GN 141 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The square designs are also suitable for use in profile systems.
  Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
  
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	48.34 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-T-angle connector clamps

  GANTER

  The clamping bores of GN 191 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912.They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.78 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle linear actuator connectors, Aluminium

  GANTER

  T-angle linear actuator connectors GN 191.1 are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	47.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle linear actuator connectors, Stainless Steel

  GANTER

  GN 191.1 Stainless Steel-T-angle linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	133.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Two-way connector clamps, multi part assembly, unequal bore dimensions

  GANTER

  The clamping bores of GN 135 two-way connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The square designs are also suitable for use in profile systems.
  The bore holes and squares must be put together such that an adaptation between between different tube cross-sections is possible.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	49.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  System Pallet PAL

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	900.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

Loading...