Bearing Units（Page 6）

?* Information on days to ship and prices

• 

  Flanged Housing Unit, ZKLR Series

  INA

  Angular contact ball bearing units ZKLR..-2Z and ZKLR..-2RS, double direction, for screw mounting

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	98.97 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Flanged Bearing Housing Unit GLCTE..-TV-VA-FD, Two-Bolt, Oval, Plastic Housing

  INA

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	81.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball Flange Bearings UCFC (Grey Cast Iron)

  MAEDLER

  Material: Housing from grey cast iron.
  Rolling bearing from bearing steel.
  With centring spigot.
  The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
  The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
  Delivery with grease nipple.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.54 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball Pillow Block Bearings SSUCPA, Stainless Steel

  MAEDLER

  Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
  
  The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
  The shaft will get fastened with 2 setscrews.
  Lubricated for life at normal operating conditions. Re-lubricating is possible.
  
  Delivery with stainless steel grease nipple.
  
  * Maximum radial load if axial force = 0.
  The axial load rating is approx. 20% of the radial load rating.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	43.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Flange Bearing Units FF, for Support Side, Black Oxided

  MAEDLER

  Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearing.
  Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 4 mounting holes.
  Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
  Matching counterpart for fixed side: Flange Bearing FK.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	24.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Floating bearing unit Type EF, block version, form B, steel (24078)

  NORELEM

  · With deep groove ball bearing
  
  · The axis height of the spindle bearing matches the fixed bearing unit 24078-01

  Select to compare

  Configure now
  Starting from∗ ：	49.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Insert bearing B, ball-bearing steel (24235)

  NORELEM

  · Inside rings for easier fastening
  
  · Internal diameter with plus-tolerance
  
  · Lubricated for entire service life

  Select to compare

  Configure now
  Starting from∗ ：	12.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pillow block bearing flange bearing, stainless steel (24242)

  NORELEM

  · With a sealed, single-row ball bearing or plastic slide bearing
  
  · Compensates for misalignments on the shaft
  
  · Internal diameter of the bearings with plus-tolerance
  
  · Maintenance-free and corrosion protected
  
  · Ready to install

  Select to compare

  Configure now
  Starting from∗ ：	63.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pillow block bearing pedestal bearing, stainless steel (24241)

  NORELEM

  · With a sealed, single-row ball bearing or plastic slide bearing
  
  · Compensates for misalignments on the shaft
  
  · Internal diameter of the bearings with plus-tolerance
  
  · Maintenance-free and corrosion protected
  
  · Ready to install

  Select to compare

  Configure now
  Starting from∗ ：	73.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pillow block bearing flange bearing, UCFL, grey cast iron (24215)

  NORELEM

  · With a sealed, single-row ball bearing
  
  · Compensates for misalignments on the shaft
  
  · Internal diameter of the bearings with plus-tolerance
  
  · Maintenance-free
  
  · Ready to install

  Select to compare

  Configure now
  Starting from∗ ：	16.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  General Structural Use Rolled Steel Pillow

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  Select to compare

  Configure now
  Starting from∗ ：	162.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spherical Graphite Cast Iron Pillow

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.34 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lightweight Cast Iron Diamond Flange Shape

  NTN

  [Features] Lightweight cast iron diamond flange bearing unit. The shape of the inner diameter of the bearing can be selected from cylindrical set screw and cylindrical eccentric collar.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Lightweight Cast Iron Pillow

  NTN

  [Features]
  · A combination of plummer blocks and a ball bearing.
  [Applications]
  · Used frequently in transmission equipment and general machinery.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.31 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cast Iron Diamond Deformation Flange Shape

  NTN

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.44 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Cast Iron High Center Pillow Unit UCHP

  NTN

  A high center pillow unit optimal for when the shaft center is a long distance from the base.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.60 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Steel Plate Round Flange Shape

  NTN

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cast Iron Pillow Unit UKIP

  NIPPON PILLOW BLOCK

  Pillow unit for use with heavy loads. The bearing box is thick with high rigidity, making it optimal for heavy load, vibration, and shock applications.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	86.20 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Cast Iron Deformed Diamond-Flanged Unit UCFA

  NIPPON PILLOW BLOCK

  Diamond-flanged unit with angle adjustment capabilities and a single fulcrum at the center. When mounting a bearing unit, fine adjustments can be made to the central support position

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.99 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cast Iron Take-Up Unit, Adapter Type, UKT (Adapter Sold Separately)

  NIPPON PILLOW BLOCK

  [Features]
  · A combination bearing unit that contains a bearing and a bearing box fitted with a slide groove.
  · The bearing box can be moved along the slide groove in a radial direction to adjust the support position.
  · With cylindrical holes as a general usage condition, this high precision unit can be used for a variety of applications. *Adapter sold separately.
  · Please confirm the compatible adapters in our catalog.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.09 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Cast Iron Round Flanged Unit with Spigot Joint, Adapter Type, UKFC (Adapter Sold Separately)

  NIPPON PILLOW BLOCK

  This bearing unit combines a bearing and a bearing box with a round flange and a spigot joint on the mounting surface. *Adapter sold separately. Please confirm the compatible adapters in our catalog.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.65 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Cast Iron Square-Flanged Unit With Spigot Joint UCFS

  NIPPON PILLOW BLOCK

  Bearing unit that combines a bearing with a bearing box with a square flange and a spigot joint on the mounting surface

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	130.94 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Cast Iron Square Flanged Unit, Adapter Type, UKF (Adapter Sold Separately)

  NIPPON PILLOW BLOCK

  This bearing unit combines a bearing and a bearing box with a square flange. *Adapter sold separately. Please confirm the compatible adapters in our catalog.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.60 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Grooved Steel Take-Up Unit UCTU

  NIPPON PILLOW BLOCK

  This take-up unit features a frame made from grooved steel, and is a unit product combined with an adjustment bolt.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,265.83 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Cartridge-Type Unit UCC

  NIPPON PILLOW BLOCK

  Bearing unit that combines a bearing and a bearing box with a cylindrical outer diameter surface. The bearing box is a cylinder machined with h7 accuracy, so it can be used embedded in the cylindrical hole of the main body of the machinery.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	382.56 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Cast Iron Flanged Unit UKFS

  NIPPON PILLOW BLOCK

  Bearing unit that combines a bearing with a square flange and a bearing box with a spigot joint on the mounting surface.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	130.94 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Steel Plate Pillow Unit SBPP

  NIPPON PILLOW BLOCK

  Lightweight pillow unit for light loads made from the combination of a lightweight bearing and a press machined steel plate bearing box.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type

  ASAHI SEIKO

  Pillow-type unit UCP200-type bearing box with raised center height.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.54 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type

  ASAHI SEIKO

  Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.

  Select to compare

  Configure now
  Starting from∗ ：	14.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type

  ASAHI SEIKO

  Both surfaces are sealed with a rubber seal, and the width of the inner and outer rings are narrower than in a UC-type bearing.

  Select to compare

  Configure now
  Starting from∗ ：	10.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pillow Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series, MUSP Shape

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well. Environmentally friendly series
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Select to compare

  Configure now
  Starting from∗ ：	66.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Diamond Flange Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series

  ASAHI SEIKO

  [Features]
  · The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

  Select to compare

  Configure now
  Starting from∗ ：	57.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Diamond Deformation Flanged Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Select to compare

  Configure now
  Starting from∗ ：	10.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Steel Plate Pillow Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Select to compare

  Configure now
  Starting from∗ ：	8.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flanged bearing housing unit, 4 hole, with centering pilot, with adapter sleeve bearing GS

  INA

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	67.58 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units GLCTE..-FA125, two-hole, plastic housing, radial insert ball bearing with eccentric locking collar, with Corrotect® coating, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Housing units GRA, three / four-bolt flanged housing units, sheet steel, eccentric locking collar, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.83 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units GRRY..-VA, three / four-bolt flanged housing units, sheet steel, grub screws in inner ring, R seals, with anti-corrosion protection

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	124.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Housing units LCJT, two-bolt flanged housing units, cast iron, eccentric locking collar, L seals, for temperatures from -40°C to +180°C

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Housing units PCF, four-bolt flanged housing units, cast iron, eccentric locking collar, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units PCFT, two-bolt flanged housing units, cast iron, eccentric locking collar, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units PCFTR, three-bolt flanged housing units, cast iron, eccentric locking collar, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.09 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units PCJ..-FA125, four-bolt flanged housing units, cast iron, eccentric locking collar, P seals, with anti-corrosion protection

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units PCJ..-TV-FA125, four-hole, plastic housing, radial insert ball bearing with eccentric locking collar, with Corrotect® coating, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units PCJT, two-bolt flanged housing units, cast iron, eccentric locking collar, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...