¡Estamos traduciendo nuestra tienda online al español!
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.
Transmissions, Reducers (Type: Bevel gear)
21 Series de productos
* Información sobre días de envío, gastos de envío y precios
MAEDLER
Angular drives with high torques at very low dimensions.Suitable in a wide variety of applications 8 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened.Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication.Angular backlash: 3°+/-1°.Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%.Permissable operating temperature: -20° to +60°C.* Not according to DIN 6885.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - - - - ConfigurarPrecio (IVA no incluido) a partir de:122.15 €Fecha de envío normal:4 días laborables
MAKISHINKO
FB Type Straight Bevel Gearbox
Small and lightweight bevel gearbox with sturdy design optimal for agricultural machinery and industrial machineryMás información- CAD:
- 2D
Mounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type No Leg Bevel gear 1 ～ 2 19 ～ 28 N/A Solid ConfigurarPrecio (IVA no incluido) a partir de:367.76 €Fecha de envío normal:15 días laborables
MAKISHINKO
Small bevel gearbox that is lightweight, low noise, and high efficiency with free mounting directionMás información- CAD:
- 2D
Mounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type With Leg Bevel gear 1 ～ 2 11 ～ 19 N/A Solid ConfigurarPrecio (IVA no incluido) a partir de:200.40 €Fecha de envío normal:6 días laborables
KYOUIKU GEAR MFG（KG）
Economy type compact bevel gear set. Shaft diameter ø4~. Choose from speed ratios 1: 1 and 1: 2. Both sides are mounting reference surfaces, and drilled hole machining has been applied to the body to facilitate quick mounting.Drilled holes can also be used as pilot holes. Plastic cover included.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type No Leg Bevel gear 1 ～ 2 4 ～ 12 N/A Solid ConfigurarPrecio (IVA no incluido) a partir de:83.92 €Fecha de envío normal:Artículo en stock: 1 día laborableAlgunos artículos se pueden enviar el mismo día
MAKISHINKO
Silent, powerful and robust bevel gearbox with abundant selectable shaft arrangements that can be used for a wide range of applicationsMás información- CAD:
- 2D
Mounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type With Leg Bevel gear 1 ～ 2 19 ～ 40 N/A Solid ConfigurarPrecio (IVA no incluido) a partir de:537.56 €Fecha de envío normal:20 días laborables
KOHARA GEAR INDUSTRY
High-efficiency aluminum die cast compact L type bevel BOX that uses carburized spiral bevel gears to reduce noise. Lubricated with high-grade grease. Maintenance-free.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type Flange Bevel gear 1 ～ 2 10 ～ 20 N/A Solid ConfigurarPrecio (IVA no incluido) a partir de:282.78 €Fecha de envío normal:4 días laborables
KOHARA GEAR INDUSTRY
[Features]· High-efficiency aluminum die cast compact T type bevel BOX that uses carburized spiral bevel gears to reduce noise.· Lubricated with high-grade grease. Maintenance-free.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type Flange Bevel gear 1 ～ 2 10 ～ 20 N/A Solid ConfigurarPrecio (IVA no incluido) a partir de:304.28 €Fecha de envío normal:4 días laborables
KOHARA GEAR INDUSTRY
Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 16 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type Flange With Leg Bevel gear 1 ～ 2 18 ～ 40 N/A Solid ConfigurarPrecio (IVA no incluido) a partir de:1,341.68 €Fecha de envío normal:18 días laborablesKOHARA GEAR INDUSTRY
Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 8 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type Flange With Leg Bevel gear 1 ～ 2 19 ～ 40 N/A Solid ConfigurarPrecio (IVA no incluido) a partir de:1,389.26 €Fecha de envío normal:18 días laborables
KYOUIKU GEAR MFG（KG）
High-precision and compact bevel gearbox. Choose from speed ratios 1: 1 and 1: 2. Abundant lineup of shaft diameters available, from ø3 to ø25. The full surface is the reference surface, and there are no restrictions on the mounting direction.Can be mounted quickly thanks to its screw hole machining, already completed. Lubricated with grease and maintenance-free.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type No Leg Bevel gear 1 ～ 2 4 ～ 25 N/A Solid / Hollow ConfigurarPrecio (IVA no incluido) a partir de:133.17 €Fecha de envío normal:6 días laborables
MAEDLER
Miniature Bevel Gearboxes MKU Model K
Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l1 and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Model K: Input side C: Transmission ratio for gearing down.Permiss. Ambient temperature -10°C to +90°C.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - - - - ConfigurarPrecio (IVA no incluido) a partir de:316.14 €Fecha de envío normal:4 días laborables
MAEDLER
Miniature Bevel Gearboxes MKU Model L
Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l1 and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Model L: Straight-through output shaft, slowly turning.Permiss. Ambient temperature -10°C to +90°C.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - - - - ConfigurarPrecio (IVA no incluido) a partir de:316.14 €Fecha de envío normal:4 días laborables
MAEDLER
Bevel Gearboxes DZA Model H, Size 2
General data: Gearbox with hollow shaft on the output side.Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.The maximum input speed (hollow shaft as input device) for gearing up is 750 min-1 at 2 : 1 and 500 min-1 at 3 : 1.Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - 14 - - ConfigurarPrecio (IVA no incluido) a partir de:454.84 €Fecha de envío normal:4 días laborables
MAEDLER
Bevel Gearboxes DZA, Version A
General data: 4 sizes.Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Ratio for gearing up to max. 750 min-1 possible.Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - 8 ～ 25 - - ConfigurarPrecio (IVA no incluido) a partir de:174.53 €Fecha de envío normal:4 días laborables
MAEDLER
Bevel Gearboxes DZA, Version B
General data: 4 sizes.Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Ratio for gearing up to max. 750 min-1 possible.Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - 8 ～ 25 - - ConfigurarPrecio (IVA no incluido) a partir de:180.35 €Fecha de envío normal:4 días laborables
MAEDLER
Bevel Gearboxes DZR, Stainless Steel, Version A
General data: High resistance to corrosion.4 sizes.Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Ratio for gearing up to max. 750 min-1 possible.Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - 8 ～ 25 - - ConfigurarPrecio (IVA no incluido) a partir de:627.37 €Fecha de envío normal:4 días laborables
MAEDLER
Bevel Gearboxes DZR, Stainless Steel, Version B
General data: High resistance to corrosion.4 sizes.Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Ratio for gearing up to max. 750 min-1 possible.Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - 8 ～ 25 - - ConfigurarPrecio (IVA no incluido) a partir de:667.48 €Fecha de envío normal:4 días laborables
MAEDLER
Bevel Gearboxes HUG, Ratio 1:1
General: Miniaturised right-angle drives for light duty.Suitable for manual and short term drive applications.Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion, high rigidity.Electrical insulating. Shafts hardened and ground.Gearing: straight teeth, max. backlash 2º. Speed max. 1,000min-1.Version A: with steel bevel gears, bonded onto the shafts.Version B: with polyacetal bevel gears, moulded onto the shafts.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - - - - ConfigurarPrecio (IVA no incluido) a partir de:49.77 €Fecha de envío normal:4 días laborables
MAEDLER
Miniature Bevel Gearboxes MKU Model H
Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l1 and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Model H: Straight-through output hollow shaft, slowly turning.Permiss. Ambient temperature -10°C to +90°C.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - - - - ConfigurarPrecio (IVA no incluido) a partir de:334.06 €Fecha de envío normal:4 días laborables
MAEDLER
Bevel Gearboxes DZA Model H, Size 3
General data: Gearbox with hollow shaft on the output side.Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.The maximum input speed (hollow shaft as input device) for gearing up is 750 min-1 at 2 : 1 and 500 min-1 at 3 : 1.Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - 19 - - ConfigurarPrecio (IVA no incluido) a partir de:656.24 €Fecha de envío normal:4 días laborables
MAEDLER
Angular drives with high torques at very low dimensions.Suitable in a wide variety of applications 8 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened.Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication.Angular backlash: 3°+/-1°.Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%.Permissable operating temperature: -20° to +60°C.* Not according to DIN 6885.Más informaciónMounting Division Type Reduction Ratio Shaft Diameter (φ) The presence or absence of motor Output shaft type - Bevel gear - - - - ConfigurarPrecio (IVA no incluido) a partir de:168.91 €Fecha de envío normal:4 días laborables