Transmissions, Reducers（Type：Bevel gear）

?* Information on days to ship and prices

• 

  Bevel Gearboxes KEK Version A

  MAEDLER

  Angular drives with high torques at very low dimensions.
  Suitable in a wide variety of applications
  8 Sizes. Ratio 1:1.
  Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
  Gearing: Bevel gears from steel, surface hardened.
  Bearing: Ball bearings with rubber seal RS.
  Lubrication: Maintenance free grease lubrication.
  Angular backlash: 3°+/-1°.
  Operating time: 20% at 5 min.
  Life time: 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%.
  Permissable operating temperature: -20° to +60°C.
  
  * Not according to DIN 6885.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	118.02 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  KG Gearbox, B-SET

  KYOUIKU GEAR MFG（KG）

  Economy type compact bevel gear set. Shaft diameter ø4~. Choose from speed ratios 1: 1 and 1: 2. Both sides are mounting reference surfaces, and drilled hole machining has been applied to the body to facilitate quick mounting.
  Drilled holes can also be used as pilot holes. Plastic cover included.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	83.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  KG Gearbox, B-BOX

  KYOUIKU GEAR MFG（KG）

  High-precision and compact bevel gearbox. Choose from speed ratios 1: 1 and 1: 2. Abundant lineup of shaft diameters available, from ø3 to ø25. The full surface is the reference surface, and there are no restrictions on the mounting direction.
  Can be mounted quickly thanks to its screw hole machining, already completed. Lubricated with grease and maintenance-free.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	116.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TB Type Spiral Bevel Gearbox

  MAKISHINKO

  Small bevel gearbox that is lightweight, low noise, and high efficiency with free mounting direction

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	197.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes HUG, Ratio 1:1

  MAEDLER

  General: Miniaturised right-angle drives for light duty.
  Suitable for manual and short term drive applications.
  Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion, high rigidity.
  Electrical insulating. Shafts hardened and ground.
  Gearing: straight teeth, max. backlash 2º. Speed max. 1,000min^-1.
  Version A: with steel bevel gears, bonded onto the shafts.
  Version B: with polyacetal bevel gears, moulded onto the shafts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	48.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Miniature Bevel Gearboxes MKU Model K

  MAEDLER

  Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.
  
  General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
  Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
  Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
  Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
  Bearing: Life time min. 15,000h.
  Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.
  
  Model K: Input side C: Transmission ratio for gearing down.
  
  Permiss. Ambient temperature -10°C to +90°C.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	305.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Miniature Bevel Gearboxes MKU Model H

  MAEDLER

  Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.
  
  General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
  Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
  Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
  Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
  Bearing: Life time min. 15,000h.
  Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.
  
  Model H: Straight-through output hollow shaft, slowly turning.
  
  Permiss. Ambient temperature -10°C to +90°C.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	322.76 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZA, Version A

  MAEDLER

  General data: 4 sizes.
  Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
  Ratio for gearing up to max. 750 min^-1 possible.
  Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	168.63 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  SB Type Spiral Bevel Gearbox

  MAKISHINKO

  Silent, powerful and robust bevel gearbox with abundant selectable shaft arrangements that can be used for a wide range of applications

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	530.85 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Miniature Bevel Gearboxes MKU Model L

  MAEDLER

  Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.
  
  General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
  Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
  Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
  Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
  Bearing: Life time min. 15,000h.
  Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.
  
  Model L: Straight-through output shaft, slowly turning.
  
  Permiss. Ambient temperature -10°C to +90°C.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	305.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZA, Version B

  MAEDLER

  General data: 4 sizes.
  Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
  Ratio for gearing up to max. 750 min^-1 possible.
  Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	174.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes KEK Version B

  MAEDLER

  Angular drives with high torques at very low dimensions.
  Suitable in a wide variety of applications
  8 Sizes. Ratio 1:1.
  
  Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
  Gearing: Bevel gears from steel, surface hardened.
  Bearing: Ball bearings with rubber seal RS.
  Lubrication: Maintenance free grease lubrication.
  Angular backlash: 3°+/-1°.
  Operating time: 20% at 5 min.
  Life time: 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%.
  Permissable operating temperature: -20° to +60°C.
  
  * Not according to DIN 6885.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	163.20 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  FB Type Straight Bevel Gearbox

  MAKISHINKO

  Small and lightweight bevel gearbox with sturdy design optimal for agricultural machinery and industrial machinery

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	363.17 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Bevel Box T Type KBX

  KOHARA GEAR INDUSTRY

  [Features]
  · High-efficiency aluminum die cast compact T type bevel BOX that uses carburized spiral bevel gears to reduce noise.
  · Lubricated with high-grade grease. Maintenance-free.

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	151.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZA Model H, Size 2

  MAEDLER

  General data: Gearbox with hollow shaft on the output side.
  Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.
  The maximum input speed (hollow shaft as input device) for gearing up is 750 min^-1 at 2 : 1 and 500 min^-1 at 3 : 1.
  Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	439.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Box L Type CBX

  KOHARA GEAR INDUSTRY

  Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 16 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	654.31 €
  Min. Shipping Days ：	19 Days

  *Unit price with basic configuration

• 

  Bevel Box L Type KBX

  KOHARA GEAR INDUSTRY

  High-efficiency aluminum die cast compact L type bevel BOX that uses carburized spiral bevel gears to reduce noise. Lubricated with high-grade grease. Maintenance-free.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	140.68 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Bevel Box T Type CBX

  KOHARA GEAR INDUSTRY

  Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 8 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,320.30 €
  Min. Shipping Days ：	19 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZR, Stainless Steel, Version A

  MAEDLER

  General data: High resistance to corrosion.
  4 sizes.
  Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
  Ratio for gearing up to max. 750 min^-1 possible.
  Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	606.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZR, Stainless Steel, Version B

  MAEDLER

  General data: High resistance to corrosion.
  4 sizes.
  Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
  Ratio for gearing up to max. 750 min^-1 possible.
  Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	644.91 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZA Model H, Size 3

  MAEDLER

  General data: Gearbox with hollow shaft on the output side.
  Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.
  The maximum input speed (hollow shaft as input device) for gearing up is 750 min^-1 at 2 : 1 and 500 min^-1 at 3 : 1.
  Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	634.04 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...