Registro

¡Estamos traduciendo nuestra tienda online al español! 

Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.

Sliding T-Nuts for aluminium construction profiles

Nuts (for extruded aluminum extrusions) are fasteners used to attach parts to aluminum extrusions, connect two frames together or the like. Pre- and post-assembly nuts are available. The former is inserted in groove end surfaces of extruded aluminum extrusions before assembly. The latter is inserted in the tops of grooves after assembly. Nuts can be fastened finger-tight in extruded aluminum extrusion grooves by using spring nuts, anti-slip nuts or stoppers. Nuts are made of many different materials and have many different surface treatments, so should be selected to match the application.
    • 5 Series / Pre-Assembly Insertion Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      5 Series / Pre-Assembly Insertion Nuts【1 a 100 piezas】

      The pre-assembly insert nut is installed from the flange of the groove before assembly. The large width results in less clearance in the groove for easy bolting.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Pre-Assembly Insertion Nuts-MISUMI 5 Series (6 mm Groove Width)-M3 / M4 / M5StandardStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.41 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 6 Series / Pre-Assembly Insertion Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      6 Series / Pre-Assembly Insertion Nuts【1 a 100 piezas】

      The pre-assembly insert nut is installed from the flange of the groove before assembly. A large width results in a smaller clearance in the groove for easy bolting.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Pre-Assembly Insertion Nuts-MISUMI 6 Series (8 mm Groove Width)-M3 / M4 / M5 / M6StandardStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.43 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 8 Series / Pre-Assembly Insertion Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      8 Series / Pre-Assembly Insertion Nuts【1 a 100 piezas】

      The pre-assembly insert nut is installed from the flange of the groove before assembly. A large width results in a smaller clearance in the groove for easy bolting.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Pre-Assembly Insertion Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M4 / M5 / M6 / M8StandardStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.48 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 6 Series / Post-Assembly Insertion Spring Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      6 Series / Post-Assembly Insertion Spring Nuts

      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 6 Series (8 mm Groove Width)-M3 / M4 / M5 / M6With Ball SpringStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.60 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 5 Series / Post-Assembly Insertion Spring Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      5 Series / Post-Assembly Insertion Spring Nuts

      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 5 Series (6 mm Groove Width)-M3 / M4 / M5With Ball SpringStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.57 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 6 Series / Pre-Assembly Insertion Spring Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)
      • Stock

      MISUMI

      6 Series / Pre-Assembly Insertion Spring Nuts

      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Pre-Assembly Insertion Nuts-MISUMI 6 Series (8 mm Groove Width)-M3 / M4 / M5 / M6With Ball SpringStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.62 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 8 Series / Post-Assembly Insertion Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      8 Series / Post-Assembly Insertion Nuts

      Inexpensive insert nut for post-assembly that can be used without a stopper. It can be mounted out of the groove after assembly.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M4 / M5 / M6 / M8Short, RotatingStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.64 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 8 Series / Pre-Assembly Insertion Spring Nuts
      • DESCUENTO
      • Volume Discount
      • Order quantities extended (D-JIT)
      • Stock

      MISUMI

      8 Series / Pre-Assembly Insertion Spring Nuts

      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Pre-Assembly Insertion Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M4 / M5 / M6 / M8With Ball SpringStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.69 €
      Precio especial
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 8 Series / Post-Assembly Insertion Spring Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      8 Series / Post-Assembly Insertion Spring Nuts

      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M4 / M5 / M6 / M8With Ball SpringStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.65 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 6 Series / Post-Assembly Stoppers
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      6 Series / Post-Assembly Stoppers

      Inexpensive press-in nut for post-assembly, which can be used without plug. Nuts with anti-lock coating, nuts with conductive functions, etc. are available.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 6 Series (8 mm Groove Width)-M3 / M4 / M5 / M6Short, RotatingStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.58 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • Square Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      Square Nuts【100 piezas】

      Square nut that can be used with 15mm square aluminium extrusions. This product is sold in packs (100 pieces per pack). You cannot buy it by specifying the quantity.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Pre-Assembly Insertion Nuts-MISUMI 3 Series (5.7 mm Groove Width)-M3EconomySteelNot Provided-
      Precio (IVA no incluido) a partir de:
      7.56 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Posible envío el mismo día
      Configurar
    • 5 Series / Post-Assembly Insertion Lock Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      5 Series / Post-Assembly Insertion Lock Nuts

      The position of the one-piece nut can be fixed with the set screw provided. It is convenient for places where panels and covers are frequently removed.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 5 Series (6 mm Groove Width)-M3 / M4 / M5With LockStainless Steel ~ SteelNot Provided-
      Precio (IVA no incluido) a partir de:
      0.61 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 8 Series / Post-Assembly Insertion Nuts with Leaf Springs
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      8 Series / Post-Assembly Insertion Nuts with Leaf Springs

      The disc spring is welded to the stopper nut. It does not fall off even when the frame is placed vertically.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M4 / M5 / M6 / M8With Leaf SpringStainless Steel ~ SteelNot Provided-
      Precio (IVA no incluido) a partir de:
      0.63 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 8 Series / Post-Assembly Insertion Stopper Nuts
      • DESCUENTO
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      8 Series / Post-Assembly Insertion Stopper Nuts【1 a 100 piezas】

      Nuts with anti-locker coating, nuts with conductive functions, etc. are available.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M4 / M5 / M6 / M8StandardStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.53 €
      Precio especial
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 8 Series / Post-Assembly Insertion Screws for Aluminium Extrusions
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      8 Series / Post-Assembly Insertion Screws for Aluminium Extrusions

      -It is a nut with integrated screw. -The labour hours for bolting can be reduced.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      T-Bolt-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M8ConductiveStainless SteelNot Provided-
      Precio (IVA no incluido) a partir de:
      1.73 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Posible envío el mismo día
      Configurar
    • 5 Series / Nuts for Aluminium Extrusions
      • Volume Discount
      • Order quantities extended (D-JIT)
      • Stock

      MISUMI

      5 Series / Nuts for Aluminium Extrusions

      Low-priced press-in nut for post-assembly that can be used without stoppers. Nuts with anti-locker coating, nuts with conductive functions, etc. are available.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 5 Series (6 mm Groove Width)-M3 / M4Short, RotatingStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.53 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 6 Series / Post-Assembly Insertion Stopper Nuts
      • DESCUENTO
      • Volume Discount
      • Order quantities extended (D-JIT)
      • Stock

      MISUMI

      6 Series / Post-Assembly Insertion Stopper Nuts【1 a 100 piezas】

      Nuts with anti-locker coating, nuts with conductive functions, etc. are available.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Post-Assembly Insertion Nuts-MISUMI 6 Series (8 mm Groove Width)-M3 / M4 / M5 / M6StandardStainless Steel ~ SteelProvided / Not Provided-
      Precio (IVA no incluido) a partir de:
      0.45 €
      Precio especial
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Algunos artículos se pueden enviar el mismo día
      Configurar
    • 8 Series / Pre-Assembly Insertion Screws for Aluminium Extrusions
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      8 Series / Pre-Assembly Insertion Screws for Aluminium Extrusions

      -It is a bolted nut. -Labour hours for bolting can be reduced.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      T-Bolt-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M8ConductiveStainless SteelNot Provided-
      Precio (IVA no incluido) a partir de:
      2.89 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Posible envío el mismo día
      Configurar
    • 5 Series / Post-Assembly Insertion Screws for Aluminium Extrusions
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      5 Series / Post-Assembly Insertion Screws for Aluminium Extrusions

      -It is a screw-in nut. -The working hours for screwing can be reduced.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      T-Bolt-MISUMI 5 Series (6 mm Groove Width)-M5ConductiveStainless SteelNot Provided-
      Precio (IVA no incluido) a partir de:
      1.45 €
      Fecha de envío normal:
      5 días laborables
      Configurar
    • 6 Series / Post-Assembly Insertion Screws
      • Volume Discount

      MISUMI

      6 Series / Post-Assembly Insertion Screws

      -It is a nut integrated into the screw. -The labour hours for bolting can be reduced.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      T-Bolt-MISUMI 6 Series (8 mm Groove Width)-M6ConductiveStainless SteelNot Provided-
      Precio (IVA no incluido) a partir de:
      1.64 €
      Fecha de envío normal:
      5 días laborables
      Configurar
    • 5 Series / Pre-Assembly Insertion Lock Nuts
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      5 Series / Pre-Assembly Insertion Lock Nuts

      The position of the single nut can be fixed by tightening the set screw supplied.
      Más información
      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
      Pre-Assembly Insertion Nuts-MISUMI 5 Series (6 mm Groove Width)-M5With LockSteelNot Provided-
      Precio (IVA no incluido) a partir de:
      0.61 €
      Fecha de envío normal:
      Artículo en stock: 1 día laborable
      Posible envío el mismo día
      Configurar
    • 8 Series / Long Nuts / L Dimension Configurable Type

        MISUMI

        8 Series / Long Nuts / L Dimension Configurable Type

        They are long nuts with specifiable length (L dimension). The length can be specified from 50 mm.
        Más información
        Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
        Long Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)---Stainless Steel ~ SteelNot Provided-
        Fecha de envío normal:
        7 días laborables
        Configurar
      • 5 Series / Post-Assembly Insertion Short Nuts
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        5 Series / Post-Assembly Insertion Short Nuts【1 a 100 piezas】

        It can be installed in a space-saving manner. Compared to the post-assembly insert nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories one after another.
        Más información
        Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
        Post-Assembly Insertion Nuts-MISUMI 5 Series (6 mm Groove Width)-M3 / M4 / M5Short, RotatingSteelNot Provided-
        Precio (IVA no incluido) a partir de:
        0.57 €
        Fecha de envío normal:
        Artículo en stock: 1 día laborable
        Posible envío el mismo día
        Configurar
      • 6 Series / Post-Assembly Insertion Spring Nuts
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        6 Series / Post-Assembly Insertion Spring Nuts【100 piezas】

        Más información
        Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
        Post-Assembly Insertion Nuts-MISUMI 6 Series (8 mm Groove Width)-M3 / M4 / M5 / M6With Ball SpringStainless Steel ~ SteelNot Provided-
        Precio (IVA no incluido) a partir de:
        50.24 €
        Fecha de envío normal:
        Artículo en stock: 1 día laborable
        Algunos artículos se pueden enviar el mismo día
        Configurar
      • 6 Series / Pre-Assembly Insertion Screws
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        6 Series / Pre-Assembly Insertion Screws

        It is a screw-integrated nut. -Labour hours for bolting can be reduced.
        Más información
        Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
        T-Bolt-MISUMI 6 Series (8 mm Groove Width)-M6ConductiveStainless SteelNot Provided-
        Precio (IVA no incluido) a partir de:
        2.02 €
        Fecha de envío normal:
        Artículo en stock: 1 día laborable
        Algunos artículos se pueden enviar el mismo día
        Configurar
      • Post-Assembly Insertion Nut (Steel)
        • DESCUENTO
        • Volume Discount

        NIC AUTOTEC

        Post-Assembly Insertion Nut (Steel)

        [Nut type] Press-in nut for post-assembly; material: iron.
        Más información
        Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
        Post-Assembly Insertion Nuts-NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series-M3 / M4 / M5 / M6 / M8StandardSteelNot Provided-
        Precio (IVA no incluido) a partir de:
        0.90 €
        Precio especial
        Fecha de envío normal:
        Artículo en stock: 1 día laborable
        Algunos artículos se pueden enviar el mismo día
        Configurar
      • Nuts for T-slots DIN 508 enhanced (K0377)

          KIPP

          Nuts for T-slots DIN 508 enhanced (K0377)

          [Specifications]・Main material: Aluminium, Stainless steel, Steel・Main colour: Black[Features]・Carbon steel grade 10, EN AW-7075 or stainless steel 1.4571・Steel tempered (black)・Aluminium and stainless steel bright・Aluminium T-slot nuts have steel threaded inserts・Strength of stainless steel version: Rm=700N/mm2,Rp0,2=450N/mm2・DIN 508
          Más información
          Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
          ---------
          Precio (IVA no incluido) a partir de:
          1.36 €
          Fecha de envío normal:
          4 días laborables
          Configurar
        • T-nuts (07090)

            NORELEM

            T-nuts (07090)

            · Universal fastening element· Can be subsequently inserted into existing systems· Secure, electrically conductive connection · Easy assembly; can be inserted from above
            Más información
            Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
            -----StandardSteel--
            Precio (IVA no incluido) a partir de:
            0.95 €
            Fecha de envío normal:
            4 días laborables
            Configurar
          • 5 Series / Long Nuts / L Dimension Configurable

              MISUMI

              5 Series / Long Nuts / L Dimension Configurable

              Más información
              Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
              Long Nuts-MISUMI 5 Series (6 mm Groove Width)---Stainless Steel ~ SteelNot Provided-
              Fecha de envío normal:
              7 días laborables
              Configurar
            • 6 Series / Post-Assembly Insertion Nuts with Leaf Spring
              • DESCUENTO
              • Volume Discount
              • Order quantities extended (D-JIT)

              MISUMI

              6 Series / Post-Assembly Insertion Nuts with Leaf Spring

              The disc spring is welded to the stopper nut. It does not fall off even if the frame is placed vertically.
              Más información
              Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
              Post-Assembly Insertion Nuts-MISUMI 6 Series (8 mm Groove Width)-M3 / M4 / M5 / M6With Leaf SpringStainless Steel ~ SteelNot Provided-
              Precio (IVA no incluido) a partir de:
              0.57 €
              Precio especial
              Fecha de envío normal:
              Artículo en stock: 1 día laborable
              Algunos artículos se pueden enviar el mismo día
              Configurar
            • 5 Series / Pre-Assembly Insertion Spring Nuts
              • Volume Discount
              • Order quantities extended (D-JIT)

              MISUMI

              5 Series / Pre-Assembly Insertion Spring Nuts

              Más información
              Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
              Pre-Assembly Insertion Nuts-MISUMI 5 Series (6 mm Groove Width)-M3 / M4 / M5With Ball SpringStainless Steel ~ SteelProvided / Not Provided-
              Precio (IVA no incluido) a partir de:
              0.60 €
              Fecha de envío normal:
              Artículo en stock: 1 día laborable
              Algunos artículos se pueden enviar el mismo día
              Configurar
            • 5 Series / Flanged Nuts for Aluminium Extrusions
              • Volume Discount

              MISUMI

              5 Series / Flanged Nuts for Aluminium Extrusions

              Flanged nut. It can be used as the tip of pre-assembly insertion bolts, such as HNTLSN5-5-12.
              Más información
              Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
              Flanged Nuts-MISUMI 3 Series (5.7 mm Groove Width) / MISUMI 5 Series (6 mm Groove Width) / MISUMI 6 Series (8 mm Groove Width) / MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M4 / M5-Stainless SteelNot Provided-
              Precio (IVA no incluido) a partir de:
              0.44 €
              Fecha de envío normal:
              Artículo en stock: 1 día laborable
              Algunos artículos se pueden enviar el mismo día
              Configurar
            • 8 Series / Post-Assembly Insertion Short Nuts
              • Volume Discount
              • Order quantities extended (D-JIT)

              MISUMI

              8 Series / Post-Assembly Insertion Short Nuts【1 a 100 piezas】

              It can be installed in a space-saving manner. Compared to the retrofit insert nut HNTAP, the overall length is shorter, so it is effective when sensors and small accessories are fitted one after the other.
              Más información
              Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
              Post-Assembly Insertion Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M3 / M4 / M8Short, RotatingSteelNot Provided-
              Precio (IVA no incluido) a partir de:
              0.65 €
              Fecha de envío normal:
              Artículo en stock: 1 día laborable
              Algunos artículos se pueden enviar el mismo día
              Configurar
            • Hammer-head screws (07094)

                NORELEM

                Hammer-head screws (07094)

                · Universal fastening element· Can be subsequently inserted into existing systems· Secure, electrically conductive connection· Easy assembly; can be inserted from above
                Más información
                Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                ------Steel--
                Precio (IVA no incluido) a partir de:
                0.62 €
                Fecha de envío normal:
                4 días laborables
                Configurar
              • 6 Series / Pre-Assembly Square Nuts
                • DESCUENTO
                • Volume Discount
                • Order quantities extended (D-JIT)

                MISUMI

                6 Series / Pre-Assembly Square Nuts【100 piezas】

                Más información
                Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                Pre-Assembly Insertion Nuts-MISUMI 6 Series (8 mm Groove Width)-M4 / M5 / M6EconomySteelNot Provided-
                Precio (IVA no incluido) a partir de:
                18.95 €
                Precio especial
                Fecha de envío normal:
                Artículo en stock: 1 día laborable
                Algunos artículos se pueden enviar el mismo día
                Configurar
              • 6 Series / Post-Assembly Insertion Short Nuts
                • Volume Discount
                • Order quantities extended (D-JIT)
                • Stock

                MISUMI

                6 Series / Post-Assembly Insertion Short Nuts【1 a 100 piezas】

                It can be installed in a space-saving manner. Compared to the retrofit insert nut HNTAP, the overall length is shorter so that it is effective when sensors and small accessories are attached one after the other.
                Más información
                Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                Post-Assembly Insertion Nuts-MISUMI 6 Series (8 mm Groove Width)-M3 / M4 / M5 / M6Short, RotatingSteelNot Provided-
                Precio (IVA no incluido) a partir de:
                0.60 €
                Fecha de envío normal:
                Artículo en stock: 1 día laborable
                Algunos artículos se pueden enviar el mismo día
                Configurar
              • 6 Series / Long Nuts / L Dimension Configurable

                  MISUMI

                  6 Series / Long Nuts / L Dimension Configurable

                  They are long nuts with specifiable length (L dimension). The length can be specified from 50 mm.
                  Más información
                  Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                  Long Nuts-MISUMI 6 Series (8 mm Groove Width)---Stainless Steel ~ SteelNot Provided-
                  Fecha de envío normal:
                  7 días laborables
                  Configurar
                • 5 Series / Post-Assembly Insertion Spring Nuts
                  • Order quantities extended (D-JIT)

                  MISUMI

                  5 Series / Post-Assembly Insertion Spring Nuts【100 piezas】

                  Más información
                  Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                  Post-Assembly Insertion Nuts-MISUMI 5 Series (6 mm Groove Width)-M3 / M4 / M5With Ball SpringStainless Steel ~ SteelNot Provided-
                  Precio (IVA no incluido) a partir de:
                  48.11 €
                  Fecha de envío normal:
                  Artículo en stock: 1 día laborable
                  Algunos artículos se pueden enviar el mismo día
                  Configurar
                • 8 Series / Flanged Nuts for Aluminium Extrusions
                  • Volume Discount
                  • Order quantities extended (D-JIT)

                  MISUMI

                  8 Series / Flanged Nuts for Aluminium Extrusions

                  Flange nut. It can be used as the tip of pre-assembly insertion bolts, such as HNTLSN8-8-20.
                  Más información
                  Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                  Flanged Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)-M8-Stainless SteelNot Provided-
                  Precio (IVA no incluido) a partir de:
                  0.63 €
                  Fecha de envío normal:
                  Artículo en stock: 1 día laborable
                  Posible envío el mismo día
                  Configurar
                • Square Nut (Steel)
                  • DESCUENTO
                  • Volume Discount

                  NIC AUTOTEC

                  Square Nut (Steel)

                  [Nut type] Pre-assembled insert nut [Features] Corresponds to SWCH
                  Más información
                  Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                  Pre-Assembly Insertion Nuts-NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series / NIC Autotec Conveyor Frame-M3 / M4 / M5 / M6 / M8StandardSteelNot Provided-
                  Precio (IVA no incluido) a partir de:
                  0.10 €
                  Precio especial
                  Fecha de envío normal:
                  Artículo en stock: 1 día laborable
                  Algunos artículos se pueden enviar el mismo día
                  Configurar
                • T Nut, Long
                  • DESCUENTO

                  YUKI LABORATORY

                  T Nut, Long

                  [Applications]· Aluminum retrofitting nut, dedicated for 40 series frames.[Note]· The cut surface is not anodized.
                  Más información
                  Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                  Long Nuts-LECOFRAME 40 Series (For Medium/Heavy Structures)-M4 / M5 / M6StandardAluminiumNot Provided-
                  Precio (IVA no incluido) a partir de:
                  2.79 €
                  Precio especial
                  Fecha de envío normal:
                  Artículo en stock: 1 día laborable
                  Algunos artículos se pueden enviar el mismo día
                  Configurar
                • Earthing terminal type I (K1282)

                    KIPP

                    Earthing terminal type I (K1282)

                    · For protecting installations and persons · Conductive contact is established through defined destruction of the oxide layer on the slot base and flanks· Compatible with all conventional aluminium profiles
                    Más información
                    Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                    ---------
                    Precio (IVA no incluido) a partir de:
                    2.75 €
                    Fecha de envío normal:
                    4 días laborables
                    Configurar
                  • Nuts for T-slots DIN 508 enhanced (07060)

                      NORELEM

                      Nuts for T-slots DIN 508 enhanced (07060)

                      · Version: steel or stainless steel
                      Más información
                      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                      -----StandardAluminium ~ Steel--
                      Precio (IVA no incluido) a partir de:
                      1.63 €
                      Fecha de envío normal:
                      4 días laborables
                      Configurar
                    • 8 Series / Long Nuts / L Dimension Fixed Type
                      • Volume Discount
                      • Order quantities extended (D-JIT)
                      • Stock

                      MISUMI

                      8 Series / Long Nuts / L Dimension Fixed Type

                      These are long nuts with a fixed length (L dimension) of 450 mm. Workpieces, such as sliding guides, can be attached to the frame at any pitch. It can also be used for attaching frames.
                      Más información
                      Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                      Long Nuts-MISUMI 8 Series (10 mm Groove Width) / MISUMI 8-45 Series (10 mm Groove Width)---Stainless Steel ~ SteelNot Provided-
                      Precio (IVA no incluido) a partir de:
                      5.59 €
                      Fecha de envío normal:
                      Artículo en stock: 1 día laborable
                      Algunos artículos se pueden enviar el mismo día
                      Configurar
                    • Long Nut

                        NIC AUTOTEC

                        Long Nut

                        [Material] Steel [Nut type] Long nut
                        Más información
                        Nut TypeEnvironmental ComplianceSeries NameProperties / applicationsThread Nominal M (mm)FunctionMaterialThreadlockerCleaning Method
                        Long Nuts-NIC Autotec M6 Series / NIC Autotec M8 Series-M6 / M8StandardSteelNot Provided-
                        Precio (IVA no incluido) a partir de:
                        7.63 €
                        Fecha de envío normal:
                        6 días laborables
                        Configurar