Double Post Type（Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Square Pipe Joint, Straight and Round Type

  MIYOSHI PIJON

  [Features]
  · Fixed at the square shafts. Installation of functional instruments making full use of the turnability of the concentric upper circular shaft.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel Square / Round Hole Pipe Joint, Square Type

  MIYOSHI PIJON

  [Features]
  · Square holes used for horizontal movement and position reproduction, and can also be combined with round holes as required for fixed mounting without shaking.
  · Can be fixed securely both horizontally and vertically.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.62 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Stainless Steel Square / Round Hole Pipe Joint, Square / Round Type

  MIYOSHI PIJON

  Can be used for fixing square shafts and rotating round shafts.
  
  [Features]
  · Features square holes for horizontal movement and positioning. Depending in the situation, it can also be combined with round holes for fixed mounting without any shaking

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel Round Hole Pipe Joint, 90° Cross Holes

  MIYOSHI PIJON

  Can be used for mounting shafts at right angles, etc.
  
  [Features]
  · The round hole allows the pipe to slide and turn around freely, for flexible assembly. Depending in the situation, it can be combined freely with square holes

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	44.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel Round Hole Pipe Joint, Two Parallel Shafts

  MIYOSHI PIJON

  [Features]
  · The round hole allows the pipe to slide and turn around freely, for flexible assembly. Depending on the situation, it can be combined freely with square holes.
  · Parts mounted to one of the shafts can rotate with that one shaft as a fulcrum

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	55.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Round Pipe Joint, Different Diameter Hole Type, Two Parallel Shaft Holes

  MIYOSHI PIJON

  * The exterior drawing may vary depending on the model number. Please refer to the catalog.
  
  [Features]
  · A combination with different diameter shafts for lighter weights and more compact systems

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.88 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Round Pipe Joint, Same Diameter Hole Type, Split Cross Shaped

  MIYOSHI PIJON

  * The exterior drawing may vary depending on the model number. Please refer to the catalog.
  
  [Features]
  · In cases where there is symmetry on the left and right, using both left and right tightening types in pair makes work easier.
  · PC403: A split and cross shaped type.
  · Insetting without having to disassemble the frame (can be retrofitted)

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.37 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Round Pipe Joint, Same Diameter Hole Type, for 45° Inclined Strut Mounting

  MIYOSHI PIJON

  Can be used for inclined mounting.
  
  [Features]
  · 45° strut.
  · For inclined mounting

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	69.48 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Round Pipe Joint, Same Diameter Hole Type, Cross Shaped, Uni-Directional Opening

  MIYOSHI PIJON

  Largely uniform with the pipe surface.
  
  [Features]
  · PJ207: cross type with uni-directional opening. Largely uniform with the pipe surface

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.11 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Round Pipe Joint, Different Diameter Hole Type, Split T Shaped, Two Tightening Screws

  MIYOSHI PIJON

  Can be used to provide frame support or for T-shaped mounting.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Round Pipe Joint, Same Diameter Hole Type, Split T Shaped, Four Tightening Screws

  MIYOSHI PIJON

  Split T-shape. Can be inserted without disassembling the frame. (Can be retrofitted)

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.33 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Round Pipe Joint, Same Diameter Hole Type, Split T Shaped, Two Tightening Screws

  MIYOSHI PIJON

  Can be used for insetting without having to disassemble the frame.
  
  [Features]
  · In cases where there is symmetry on the left and right, using both left and right tightening types in pair makes work easier.
  · Insetting without having to disassemble the frame (can be retrofitted).

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  MARU-PIJON, Same Diameter Hole Type Two- Split Cross, ø6 to ø20

  MIYOSHI PIJON

  Can be inset without having to disassemble the frame. * The exterior drawing may vary depending on the model number. Please refer to the catalog.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Round Pipe Joint, Same Diameter Hole Type, Uni-Directional Split 90° Cross Holes

  MIYOSHI PIJON

  Can be used for mounting right angle shafts.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.08 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Swivel Clamp Connector Joints / Aluminium / GN 283 / 2, with 3 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 283 swivel clamp connector joints are an assembly of the swivel clamp connectors GN 273 and GN 275. Since the swivel clamp connectors have an identical swivel width “b”, all bores “d1/d2” can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Swivel Clamp Connector Joints / Aluminium / GN 284 / 2, with 3 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 284 swivel clamp connector joints are an assembly of the swivel clamp connectors GN 274 and GN 276.
  For the type with stepless adjustment (Type S) swivel clamp connectors with a centring step are used. Within the identical swivel width “b”, all bores „d1 / d2" can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	48.16 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Swivel Clamp Connector Joints / Aluminium / GN 285 / 2, with 3 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 285 swivel clamp connector joints are an assembly of two GN 275 swivel clamp connectors.
  Since the swivel clamp connectors have an identical swivel width “b”, all bores „d1/ d2“ can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Swivel Clamp Connector Joints / Aluminium / GN 286 / 2, with 3 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 286 swivel clamp connector joints are an assembly of two GN 276 swivel clamp connectors.
  For the type with stepless adjustment (Type S) swivel clamp connectors with a centring step are used. Within the identical swivel width „b”, all bores „d1/ d2” can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	48.84 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Swivel clamp connector joints, two-part clamp pieces

  GANTER

  GN 289 swivel clamp connector joints are an assembly of two GN 279 swivel clamp connetors.
  The clamping bores of GN 289 swivel clamp connector joints are not machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The swivel clamp connectors have an identical swivel width “b”, so that all bores „d1/s1" und „d2/s2“ can be combined as required.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	108.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...