Adjuster（Page 2）

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  Adjuster, Screw Part Non-Shake, Standard Receiver Type D-J-A

  DAIWARASHI

  A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster with Bottom Part Rubber for Light Vibration-Proofing (Thrust Bearing Equipped) WD-A III /WD-B III

  DAIWARASHI

  An adjuster for light vibration-proofing with a thrust bearing that enables smooth leveling. Note: Please be advised that the model number in VONA has been changed from "WD-A III" to "WD-A3."
  
  [Features]
  · Since the rubber part comes in contact with the floor, floor damage is prevented.
  · A light vibration-proof type adjustment bolt.
  · However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
  · Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bolt bottom.
  · A nylon washer is used between the receiver and bolt. and rotation is smooth.
  · Suitable for office equipment, etc.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Heavy Weights D-C / D-C / S

  DAIWARASHI

  A standard type adjuster for heavy loads
  
  [Features]
  · The receiver is a forged item.
  · Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
  · D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
  · Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Heavy Weights with Rubber D-C-R

  DAIWARASHI

  A rubber equipped type adjuster for medium loads
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.19 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R

  DAIWARASHI

  An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
  
  [Features]
  · Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
  · Groove processing is applied to the rear surface of the rubber to make it non-slippery.
  · Effectively protects floors.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	71.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Heavy Weights (Bearing Equipped) D-H

  DAIWARASHI

  An adjuster for heavy weights with a built-in thrust bearing
  
  [Features]
  · Suitable for the adjustment of heavy machinery.
  · Stability is outstanding since a large diameter bolt is used.
  · Smooth adjustments can be made even for non-heavy machinery.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S

  DAIWARASHI

  A long screw adjuster with a wide adjustment range
  
  [Features]
  · Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
  A limited quantity of 500 mm total length products are available for M16 and M20.
  · D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster with Rubber for Heavy Weights (Thrust Bearing Equipped) WD-C-R

  DAIWARASHI

  A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	49.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster with Rubber for Heavy Weights (Wide Receiver Type) D-C III-R

  DAIWARASHI

  A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
  
  [Features]
  · The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
  · Has a larger outer diameter than D-C-R and feels more stable and heavy.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Standard Receiver Adjuster with Plastic D-A II /D-B II

  DAIWARASHI

  A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
  
  [Features]
  · Does not stain or damage floors since a special plastic is molded into the receiver.
  · The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
  · Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Standard Receiver Adjuster, Small Diameter Type D-F / D-F-C

  DAIWARASHI

  An adjuster whose screw and base have small diameters
  
  [Features]
  · Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
  · Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
  · A light load type with a receiver diameter that is also small.
  · Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.11 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Standard Receiver Adjuster, Space Saving Type D-B50 / D-A60 / D-A65

  DAIWARASHI

  A standard type adjuster in which the adjuster base is compact
  
  [Features]
  · An adjuster whose pedestal part is a compact type.
  · The screw rotates and tilts somewhat.
  · Since the receiver diameter is designed to be smaller than D-A/D-B, it is useful for saving space.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Walls D-D I

  DAIWARASHI

  A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
  
  [Features]
  · A special adjuster for walls.
  · Please use together with D-D II.
  · Please use accessories such as hex nuts, etc.
  · The portion that makes contact with the wall is folded.
  · As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
  · In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
  · Please refer to the drawings for use.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  AD-12 Adjuster with Bracket

  GIFU SANKEN KOGYO

  [Features] This is a levelling bracket for JM-65/75 castors.

  Select to compare

  Configure now
  Starting from∗ ：	14.11 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  AE Type Adjuster

  GIFU SANKEN KOGYO

  [Features] This is a levelling bracket for the TH-50/65 castors.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.05 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Recycle Adjuster K-287

  TAKIGEN

  Both disassembly and recycling are easy.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster Plastic Part KC-27

  TAKIGEN

  Selections are possible from a variety of types based on the application.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster KC-30-KS

  TAKIGEN

  The bottom part is made of polyamide and features excellent chemical-resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.83 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Quick Adjuster KC-24-3

  TAKIGEN

  Height adjustment can be easily performed just by pushing a button. After fixing, fine adjustments are possible by rotating the leg portion.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.05 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel Adjuster KC-1275-A

  TAKIGEN

  Stainless steel with superior corrosion resistance. For heavy loads.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.91 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel Mount K-1250

  TAKIGEN

  [Features] Takigen Seizo Adjuster Stainless Steel Bracket K-1250

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	42.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel Leveling Foot K-1276-A

  TAKIGEN

  Stainless steel with superior corrosion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Level Adjuster KC-275-A

  TAKIGEN

  Suitable for machine tools and vending machines.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.27 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Level Adjuster KC-280

  TAKIGEN

  The rubber on the bottom portion is flame-retardant and non-migratory. Installation is easy since there is a Phillips head slot has been provided on the back of the screw part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Level Adjuster KC-282

  TAKIGEN

  A low cost type in which the shaft part and bottom part are integrated.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel Level Adjuster KC-1275-D

  TAKIGEN

  Since the area of the bottom part that comes in contact with the ground is larger than that of general level adjusters, it is stable even when placed on soft surfaces such as on soil.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Level Adjuster Receiving Seat KC-270

  TAKIGEN

  Selections are possible from a variety of types based on the application.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hexagonal Tip Level Adjuster KC-275-A-HEX

  TAKIGEN

  Hexagon-shaped screw tip portion

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.51 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster with Felt【2 Pieces Per Package】

  YAHATA NEJI

  An adjustment hand screw with cushion that can be used for the height adjustments, of chairs and tables, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Level Adjuster (KA)

  IMAO CORPORATION

  [Features] The stainless steel type has excellent corrosion and water resistance. Approved load: 3 kN, 5 kN.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Level Adjuster (for Heavy Loads) (KA)

  IMAO CORPORATION

  Excellent cost performance
  
  [Features]
  · Fixing is possible using the KACP (clamp plate for level adjusters) sold separately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster Bolt (1,200 to 4,500 kg Type)

  TRUSCO NAKAYAMA

  · The pedestal part is made by cold forging, which provides it with strength and enables it to withstand heavy loads.
  · Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.67 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjuster Bolt (400 kg Type)

  TRUSCO NAKAYAMA

  · A light load type of the most general adjuster.
  · Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.44 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjuster Bolt (500 to 600 kg Type)

  TRUSCO NAKAYAMA

  · The most standard adjuster bolt suitable for various applications thanks to its high allowable load.
  · Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjuster Bolt (500 / 600 kg Type)

  TRUSCO NAKAYAMA

  · A resin cover is attached to the pedestal portion and prevents the damaging of floors.
  · Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.21 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjuster Bolt (Stainless Steel)

  SHIMIZU

  [Features]
  · Standard adjuster bolt.
  · Easy height adjustment after installation.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.19 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Adjuster Bolt (Trivalent Bright Chromate)

  SHIMIZU

  [Features]
  · Standard adjuster bolt.
  · Easy height adjustment after installation.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.17 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Adjuster

  WAKISANGYO

  [Features]
  · Ultra-durable and can be used for desks, furniture, and much more.
  
  [Applications]
  Used to adjust and stabilize wobbly desks and chairs

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.24 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Die-Cast Adjuster

  WAKISANGYO

  [Features]
  High-grade adjuster made with zinc die-casting.
  
  [Applications]
  Used to stabilize wobbly desks and chairs

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.86 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjuster With Felt【4 Pieces Per Package】

  WAKISANGYO

  [Features]
  · Sturdy felt prevents scratches on the floor.
  · Reduces noisy vibrations when moving furniture.
  
  [Applications]
  · Used to adjust and stabilize wobbly desks and chairs

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.84 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Free-Roll Adjuster

  WAKISANGYO

  [Features]
  Made up of 2 parts, so the upper part (integrated with the bolt) can rotate independently of the base. This enables easy height adjustment without needing to lift the furniture.
  
  [Applications]
  Used to adjust and stabilize desks and chairs

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.46 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Hexagonal Adjuster

  WAKISANGYO

  [Features]·Heavy objects can also be level-adjusted with a wrench. [Applications]·For desks, chairs, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.11 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  LV.FO - Levelling elements for ground mounting -Technopolymer base steel or stainless steel stem

  ELESA

  Levelling elements for fixing to the ground with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel or AISI 304 stainless steel articulated stem with adjusting hexagon and option of having it without or with NBR rubber no-slip disk fixed to the base.
  The fixing is carried out by means of holes, closed by a diaphragm (removable with an awl) to prevent the deposit of unsanitary residues if not used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.16 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...