Clamping Levers（Mounting Section Diameter d(mm) and/or Diameter：M5）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Cam Lever (KCL, KCLS, KCLF)
IMAO CORPORATION
Once screwed in proper position, clamping / unclamping can be done by lever up / down operation. Excellent rust prevention stainless steel type.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 16.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cam Lever (QLCA)
IMAO CORPORATION
[Features]
· Since the screw part rotates in the male screw type, the direction of the lever can be adjusted arbitrarily.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Clamp Lever (KF, KR)
IMAO CORPORATION
In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. The standard type that boasts steady popularity.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 13.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Clamp Lever (FKF, FKR)
IMAO CORPORATION
Machine lever for tightening and loosening screws without tools.
[Features]
・ In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged.
・ After tightening, you can turn the lever freely to any position.
・ Can be used in tight places where a lever cannot be turned 360°.
・ After screw tightening, the lever can be moved to an arbitrary position.
・ Main unit available in 4 colors (silver, black, red and orange).
[Applications]
・ For position-adjusting parts, such as slides and slotted holes, etc.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 8.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Clamp Lever (SUS Made) (FKF-SUS, FKR-SUS)
IMAO CORPORATION
With this stainless steel lever handle, the serration that was engaged becomes loose by pulling up on the lever. All stainless steel type and stainless steel screw parts types are available.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 22.41 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Ergo Adjust Clamp Lever (with Hexagon Socket) (EALA)
IMAO CORPORATION
Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.
[Features]
· Curved design of the entire lever part gives a comfortable grip feeling.
· We accept additional work- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 8.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Ergo Adjustment Clamp Lever (EAL)
IMAO CORPORATION
Lever with curves coordinated design. Normally, the lever part is free, and when the lever is pushed down, the serration can be engaged and operated,
which prevents incorrect handling after tightening.
[Features]
· Curved design of the entire lever part gives a comfortable grip feeling.
· Initial tightening work can be done comfortably as the knurling is applied on the lower part of the mail body.
· The standard color of the button is orange, however, black, gray, yellow, light blue, and red are also accepted as customized orders.
· We accept additional work- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 6.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
All Stainless Steel Mirror Clamp Lever MRSS, MFSS
KONISHI MFG
All stainless steel mirror clamp lever used for fixing the position. Since the lever becomes free, when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Since all parts including the lever part are stainless steel, it has excellent rust prevention properties.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 33.69 € Special price Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Mini Clamp Lever (MKF, MKR)
IMAO CORPORATION
In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Mini type with small turning radius.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 8.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Application |
| Type Clamp |
| Type operation |
| Operation Direction |
| Shape |
| L-Shaped Clamp Lever Shape |
| Lever Shape with Knob |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| Main Body Surface Treatment |
| Mounting Section Material |
| Mounting Section Surface Treatment |
| Knob Material |
| Surface Treatment of knob |
| Adjustment screw for gap |
| Mounting Section Diameter d(mm) and/or Diameter |
| Mounting Section Length L(mm) |
| Mounting Section Diameter C(mm) |
| Mounting Section Thickness h(mm) |
|
|
|
|
|
|
|
|
| |
| Brand | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | KONISHI MFG | IMAO CORPORATION |
| Product Series | |||||||||
| CAD |
|
|
|
|
|
|
|
|
|
| Starting from∗ | 16.60 € *Unit price with basic configuration Volume Discount | 42.72 € *Unit price with basic configuration Volume Discount | 13.03 € *Unit price with basic configuration Volume Discount | 8.39 € *Unit price with basic configuration Volume Discount | 22.41 € *Unit price with basic configuration Volume Discount | 8.43 € *Unit price with basic configuration Volume Discount | 6.15 € *Unit price with basic configuration Volume Discount | 33.69 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 8.96 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 7 Days | 6 Days |
| Application | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp |
| Type Clamp | Cam Mechanism | Cam Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism |
| Type operation | - | - | - | - | - | - | - | - | - |
| Operation Direction | Vertical | Vertical | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal | Horizontal |
| Shape | L-Shaped | L-Shaped | L-Shaped | L-Shaped | L-Shaped | L-Shaped | L-Shaped | L-Shaped | L-Shaped |
| L-Shaped Clamp Lever Shape | No Set Screw | No Set Screw | Set Screw Type | Set Screw Type | Set Screw Type | Set Screw Type | Push Button Type | Set Screw Type | Set Screw Type |
| Lever Shape with Knob | - | - | - | - | - | - | - | - | - |
| Mounting Section Type | Male thread / Female Thread | Female Thread | Male thread / Female Thread | Male thread / Female Thread | Male thread / Female Thread | Male thread / Female Thread | Male thread / Female Thread | Female Thread | Male thread / Female Thread |
| Rotating Radius R(mm) | 70.4 | 50 | 40 | 40 | 40 | 44 | 44 | 30 ～ 45 | 30 |
| Main Body Material | Stainless Steel / Aluminum | Steel | Zinc Alloy | Zinc Alloy | Zinc Alloy | Polyamide | Polyamide | Stainless Steel | Zinc Alloy |
| Main Body Surface Treatment | Electrolytic Polishing / Powder Coating | Black Oxide / Electroless Nickel Plating | Paint | Paint | Chrome Plating / Electrolytic Polishing | N/A | N/A | Buffed Surface | Paint |
| Mounting Section Material | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Steel | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel | Steel |
| Mounting Section Surface Treatment | N/A / Trivalent Chromate | Electroless Nickel Plating / Black Oxide | N/A / Black Oxide | Black Oxide | N/A | N/A / Black Oxide | N/A / Zinc Plating | N/A | Black Oxide |
| Knob Material | - | - | - | - | - | - | - | - | - |
| Surface Treatment of knob | - | - | - | - | - | - | - | - | - |
| Adjustment screw for gap | N/A | N/A | - | N/A | - | - | - | N/A | N/A |
| Mounting Section Diameter d(mm) and/or Diameter | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 |
| Mounting Section Length L(mm) | 20 ～ 50 | - | 10 ～ 30 | 10 ～ 50 | 10 ～ 25 | 12 ～ 50 | 10 ～ 20 | 9 | 10 ～ 50 |
| Mounting Section Diameter C(mm) | - | - | - | - | - | - | - | - | - |
| Mounting Section Thickness h(mm) | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
-
Application
- Clamp
- Operation
- Related Components
-
Type Clamp
-
Type operation
-
Operation Direction
-
Shape
-
L-Shaped Clamp Lever Shape
-
Lever Shape with Knob
-
Mounting Section Type
- Male thread
- Female Thread
- Round Hole
- Square Hole
-
Rotating Radius R(mm)
- 25
- 26
- 30
- 33.5
- 36.2
- 39
- 39.9
- 40
- 40.1
- 42
- 43
- 44
- 45
- 46.5
- 47.5
- 47.9
- 48
- 50
- 52.3
- 55
- 59.5
- 60
- 62
- 63
- 63.5
- 64
- 64.5
- 64.9
- 65
- 65.2
- 67
- 68
- 70
- 70.4
- 71.5
- 74
- 75
- 75.5
- 76
- 78
- 78.5
- 79
- 79.5
- 80
- 80.2
- 80.3
- 81
- 81.1
- 82
- 83
- 84
- 84.5
- 85
- 87
- 88
- 88.1
- 88.5
- 89
- 90
- 92
- 93
- 94.5
- 95
- 95.4
- 96
- 96.8
- 97
- 99
- 99.9
- 100
- 101
- 102
- 104
- 106
- 108
- 109
- 109.9
- 110
- 110.9
- 111
- 114
- 115
- 118
- 119
- 120
- 121
- 123
- 123.5
- 125
- 126
- 126.5
- 127
- 128
- 128.5
- 130
- 131
- 132
- 134
- 134.5
- 136
- 138
- 140
- 145
- 146
- 148
- 150
- 152
- 157
- 160
- 170
- 180
- 187.5
- 190
- 200
- 230
- 300
- 400
-
Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Polyamide
- Nylon
- Aluminum
- Other
-
Main Body Surface Treatment
-
Mounting Section Material
-
Mounting Section Surface Treatment
-
Knob Material
-
Surface Treatment of knob
-
Adjustment screw for gap
-
Mounting Section Diameter d(mm) and/or Diameter
-
Mounting Section Length L(mm)
-
Mounting Section Diameter C(mm)
-
Mounting Section Thickness h(mm)
Brand
-
- MISUMI (0)
- IMAO CORPORATION (8)
- KONISHI MFG (1)
- GANTER (0)
- KIPP (0)
- NORELEM (0)
- EUROFLEX (0)
- ESCO (0)
- NABEYA BI-TECH (0)
- ELESA (0)
- HALDER (0)
CAD data type
-
- 2D
- 3D
Categories related to Clamping Levers
-
- Closures
- Door Stays
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Gas Springs
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hooks and Shackels
- Door Units
- Handles
- Clamping Knobs
- Clamping Levers
- Rotation Handles, Crank Handles
- Hanger Hooks
- Shelves, Shelf Supports, Shelf Poles
- Door Wheels
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles
- Hinges
- Building Hardware / Interiors / Exteriors
-
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.