Clamping Levers（Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Adjustable hand levers with increased clamping force

  GANTER

  Adjustable hand levers GN 300.4 are produced with a clamping area which is linked via a thrust ball bearing to the bush and screw respectively of the clamping lever. This has led to the following advantages:
  - Doubled clamping force through vastly reduced friction.
  - There is no movement on the contact area between adjustable hand lever and component which greatly reduces any marking on the clamping area.
  - In addition a reduced creep factor has been achieved by the increased preload.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamping Levers with Eccentrical Cam, Lever / Stainless Steel / GN 927.5

  GANTER

  Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-internal thread are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping position.
  There are no loose components since they are all assembled and mounted in their correct order.
  The salient points of type A are as follows:
  The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut.
  This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.
  With these clamping levers with eccentrical cam GN 927.5, thrusts of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  T-Handles, Aluminium

  GANTER

  T-Handles GN 563.2 can be used as either operating handles or for clamping purposes, producing high clamping forces.
  T-Handles are produced using a stamping process which yields a high density material of high strength and a smooth surface.
  An original ELESA-Design, produced in metal with permission of ELESA s. p. a.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjustable hand levers for set collars (GN 311)

  GANTER

  For set collars of the standard families GN 706... and GN 707..., the adjustable hand levers GN 311 replace the hexagon socket screw DIN 912. That allows the set collars to be adjusted easily and quickly without tools.The table of dimensions of the set collars shows the corresponding hand lever for the respective set collar size d1.Under GN 706.4, semi-split set collars GN 706.2 are generally offered with clamping levers.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.40 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat adjustable hand levers, zinc die casting, bushing steel (GN 302)

  GANTER

  Adjustable hand levers GN 302 have a straight lever, not inclined, being parallel to the clamping space.Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam levers adjustable with plastic handle external thread, steel or stainless steel (K0648)

  KIPP

  · Cam levers can be used to clamp workpieces quickly and torque-free
  
  · Advantage: workpiece needs no further securing
  
  · Precise clamping adjustment via a fine thread setscrew
  
  · Application fields: machine and assembly construction, rehabilitation and medical technology
  
  · Steel and stainless steel version

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cam levers with external thread (K0005)

  KIPP

  · Cam levers can be used to clamp workpieces quickly and torque-free
  
  · Advantage: workpiece needs no further securing
  
  · Application fields: machine and assembly construction, rehabilitation and medical technology
  
  · Steel or stainless steel version
  
  · Colours: black or ruby red

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping levers external thread (K0122)

  KIPP

  · The KIPP clamping lever stands for reliability, stability and versatility
  
  · Makes it easier to clamp individual components and complete machine parts
  
  · Application fields: machine construction, plant construction, rehabilitation and medical technology, furniture industry
  
  · Different thread sizes and handle lengths

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Eccentric clamp module Form C (K0754)

  KIPP

  · Application sectors: machine construction, toolmaking, fixture construction
  
  · No additional tools required
  
  · Compatible with all conventional aluminium profile systems and T-slot tables

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.99 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping lever with plastic handle internal thread, inch (06601)

  NORELEM

  · The KIPP clamping lever stands for reliability, stability and versatility
  
  · Makes it easier to clamp individual components and complete machine parts
  
  · Application fields: machine construction, plant construction, rehabilitation and medical technology, furniture industry
  
  · The NOVO grip product range represents an attractive design and an easy-to-grip form

  Select to compare

  Configure now
  Starting from∗ ：	9.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Y-Shaped Clamp Levers

  MISUMI

  A Y-shaped clamping lever. [Features]Working direction: horizontal. -Mounting part type: External thread.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.06 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Plastic Clamp Lever_LUDM / LUDF

  NABEYA BI-TECH

  Double arm type plastic clamp lever.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam Lever _LZX

  NABEYA BI-TECH

  [Product information]
  · Lever type lever, or leverless
  · Material: Stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	114.30 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Clamp Lever (SUS Made) (FKF-SUS, FKR-SUS)

  IMAO CORPORATION

  With this stainless steel lever handle, the serration that was engaged becomes loose by pulling up on the lever. All stainless steel type and stainless steel screw parts types are available.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ergo Adjust Clamp Lever (with Hexagon Socket) (EALA)

  IMAO CORPORATION

  Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.
  
  [Features]
  · Curved design of the entire lever part gives a comfortable grip feeling.
  · We accept additional work

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tension Lever (TLF-N, TL-N)

  IMAO CORPORATION

  In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Large clamping force can be obtained because the lever part is long.
  
  [Features]
  · Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
  · Besides the door knob, all parts are made from stainless steel, so it is robust and strong

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ergo Adjustment Clamp Lever (EAL)

  IMAO CORPORATION

  Lever with curves coordinated design. Normally, the lever part is free, and when the lever is pushed down, the serration can be engaged and operated,
  which prevents incorrect handling after tightening.
  
  [Features]
  · Curved design of the entire lever part gives a comfortable grip feeling.
  · Initial tightening work can be done comfortably as the knurling is applied on the lower part of the mail body.
  · The standard color of the button is orange, however, black, gray, yellow, light blue, and red are also accepted as customized orders.
  · We accept additional work

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ergo Lever Handle (ELH)

  IMAO CORPORATION

  Polyamide lever handle which can be widely used. Main feature is curved design.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.23 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Plastic Clamp Lever ZR, ZF

  KONISHI MFG

  Lever used for fixing the position. Since the lever part is made from polyamide, the weight of the machine can be reduced. A zinc die-cast insert has been inserted in the serration part.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Clamp, Clamp Lever Included

  HALDER

  [Features]
  · This quick clamp tights work to the fixed surface while also supporting the work facing down.
  · Low profile design and so is suitable for machining the entire surface of the work.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	174.33 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Swing Clamp Low Profile Type, Size 44

  HALDER

  [Features]
  · The clamp can be tightened quickly using the bolt or clamp lever or eccentric lever
  · Swiveling the clamp arm to the right or left enables simple and quick replacement of the work.
  · Clamp position is infinitely adjustable through use of the positioning ring EH23310.0350 and the clamp arm can be brought repeatedly to the same position.
  · If a positioning ring is used, dimension h2 gets 7 mm larger (spoke s gets smaller by 7 mm).
  · Compact, so clamping is feasible in a narrow space.
  · Clamping at a high position is simple using the height adjustment cylinder.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	190.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjustable hand levers, straight lever

  GANTER

  Adjustable hand levers GN 302 have a straight lever, not inclined, being parallel to the clamping space.
  Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel

  GANTER

  Adjustable hand levers GN 300.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamping bolts, upward clamping, Steel

  GANTER

  Clamping bolts GN 918.1 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the clamping bolt is self-arresting.
  The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
  The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	48.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Double cam levers, Steel

  GANTER

  Double cam levers GN 917 are used for repositioning and clamping. The eccentrical cam has the advantage that the clamping force remains constant in every position of its travel and in addition is self arresting.
  The dimension b2 is made to match the head size of swing bolts DIN 444 and swing nuts GN 444.2 respectively.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	52.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Eccentrical cams, radial clamping, Steel

  GANTER

  Eccentrical cams GN 918 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.
  The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stop locks

  GANTER

  Stop locks GN 720 may be used as stops and feature a high degree of stability.
  The inside ball-spring latching mechanism has 4 latching positions at a distance of 90° each. Thanks to the bolt attachment using the countersunk screw, the latching position is freely selectable.
  The bar is solid and may be machined, if required.
  The countersunk screw is enclosed as part of the set.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.54 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LAC. - Cam clamping levers -Technopolymer

  ELESA

  Cam clamping levers
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
  Cam lever is a device which allows a quick and secure clamping.
  The LAC-R model with adjustable ring-nut (ELESA patent) offers quick and secure clamping.
  The knurled ring-nut on the base allows to adjust the clamping force applied while locking the lever in the desired position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  MR. - Adjustable handles -Technopolymer

  ELESA

  Glass-fibre reinforced polyamide based (PA) technopolymer, black, orange, grey colours, matte finish.
  Glass-fibre reinforced technopolymer clamping element, AISI 302 stainless steel return spring.
  Indicated when the lever turning angle is limited owing to lack of space.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam levers stainless steel with internal thread, thrust washer stainless steel (K0645)

  KIPP

  · Cam levers can be used to clamp workpieces quickly and torque-free
  
  · Advantage: workpiece needs no further securing
  
  · Application fields: machine and assembly construction, rehabilitation and medical technology, foodstuff industry
  
  · No clamping force losses due possible creep tendency
  
  · Versions: electropolished or abrasive blasted

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cam levers with internal thread stainless steel (K0645)

  KIPP

  · Cam levers can be used to clamp workpieces quickly and torque-free
  
  · Advantage: workpiece needs no further securing
  
  · Application fields: machine and assembly construction, rehabilitation and medical technology, foodstuff industry
  
  · Also suitable for use in the foodstuff industry (corrosion resistant)
  
  · Improved haptics thanks to electropolished or abrasive-blasted surface

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cam levers double (04310)

  NORELEM

  · Cam levers are used for quick and torque-free clamping
  
  · Workpiece needs no further securing
  
  · Easy to operate
  
  · High clamping forces
  
  · Application sectors: machine construction, toolmaking, fixture construction

  Select to compare

  Configure now
  Starting from∗ ：	43.99 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Resin Clamp Levers / with Push Button

  MISUMI

  A pressure clamp lever made of resin. [Material]Stainless steel / Steel

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat Tension Levers

  MISUMI

  [Features] It is a universal flat clamping lever.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat Tension Levers / With Hexagonal Socket Head / Threaded

  MISUMI

  A flat clamping lever with a hexagon socket head. [Clamp type]Clamping mechanism

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamp Nut Lever_LNN

  NABEYA BI-TECH

  S15C, shot blast finish

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.93 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamp Lever_LDM / LDF / LDR

  NABEYA BI-TECH

  3 color variation

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamp Lever_LDMS-NI / LDFS-NI

  NABEYA BI-TECH

  All stainless steel clamp lever. All parts are made of stainless steel.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	44.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamp Lever_LHM / LHF

  NABEYA BI-TECH

  Flat lever type. For use in places where upper space is limited.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.23 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini Plastic Clamp Lever_LECMS / LECFS

  NABEYA BI-TECH

  Compact type plastic clamp lever

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam Lever (ECL, ECLN)

  IMAO CORPORATION

  Resin type cam lever. With adjustment ring (with adjustment), the tightening force and the operating position of the lever can be adjusted arbitrarily.
  
  [Features]
  · Curved design of the entire lever part gives a comfortable grip feeling.
  · ECL type. By rotating the knurled adjustment ring, the tightening force and lever operating position can be adjusted arbitrarily.
  · Fine adjustment is possible without using tools

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.30 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Switch Lever (WL)

  IMAO CORPORATION

  [Features]
  · Standard type lever handle that can be used widely.
  · For grip, PG type is used

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Fixed Lever (FLR, FLS)

  IMAO CORPORATION

  Zinc die casting lever handle that is widely used. There is a round hole type and a square hole type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.63 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cam Lever (BJ167, BJ168)

  IMAO CORPORATION

  Standard type cam lever.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	98.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Clamp Lever (FKFT, FKRT)

  IMAO CORPORATION

  [Features]
  · When the lever is pulled, the serrations mesh and lever handle becomes free.
  · The upper part of the boss protrudes, and the lever lifting is easy.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...