Other Hinges and Hinge Accessory

152

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

1
2
3
4
Next >>

Multi-pivot hinges / 2-axis / 120°, 200° / stainless steel / FB-1729N / TAKIGEN

TAKIGEN

Made from stainless steel for superior corrosion resistance. Tighten the door horizontally up to 5 mm with a two-axis mechanism.
Use resin parts for shaft parts to suppress generation of particles. Remove the included stopper, to change the rotation angle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	116.61 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Multi-pivot hinges / cylinder countersinks / 2-axis / 104°, 194°, 210° / stainless steel / FB-1736 / TAKIGEN

TAKIGEN

[Features]
· The door can be tightened horizontally up to about 10 mm by a 2-axis mechanism (tightening mechanism is required).
· Dry bearing (phosphor bronze) is used for the bearing part.
· Fine adjustment of door gasket and tightening O-ring is possible with adjustment screw.
· Made of stainless steel, corrosion resistant

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	112.84 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Corner hinges / conical countersinks / 180° (90° detent) / zinc die-cast / B-845 / TAKIGEN

TAKIGEN

[Features]
· Unlike the stay type, it does not take up space.
· Click on the stainless steel ball at 90° intervals.
· Easy to install on surface type.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Step hinges / rolled / stainless steel / mirror polished / B-1028 / TAKIGEN

TAKIGEN

Suitable for enclosures with steps.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.61 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hatch hinges / conical countersinks / zinc die-cast / chrome-plated / FB-930 / TAKIGEN

TAKIGEN

[Features]
· Ideal for flat type.
· Left and right combination

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	36.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Block hinges with fastening nuts, Form B (K1142)

KIPP

· Connect two fixed components flexibly to each other

· Application sectors: machine construction, furniture construction, doors, hatches, hoods

· For overlying or inlying doors

· For overlying or inlying doors

· Fastening material included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.11 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flap hatch hinges / rolled / stainless steel / barrel polished / B-1057-5 / TAKIGEN

TAKIGEN

[Features]
· It is made of all stainless steel and has excellent corrosion resistance

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.86 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Corner hinges / internal thread / zinc die-cast / FB-735 / TAKIGEN

TAKIGEN

Can use any, including flat, corner, back hinge, etc.

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.89 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 138 / GANTER

GANTER

With their attractive design, hinges GN 138 are suitable for use in plant and machinery where a well-designed and stylish appearance is important.
The concealed and tamper-proof mounting from the rear highlights and enhances the special appearance of the hinge.
The dimensions l1 / l2 and the drill hole spacings m1 / m2 match the usual hinges GN 237 / GN 237.1 and can replace these.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	9.04 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-4 / TAKIGEN

TAKIGEN

[Features]
· It is made of all stainless steel and has excellent corrosion resistance

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.23 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pivot Hinge PH (Flat) Type/PAW (Frame) Type/PAS (Front Surface) Type

SOWA

[Material] Brass casting (White bronze plating)
[door dimensions] W450 × H700 mm or less
[door weight] PH-50, 60 2.6 kg or less PH-80,95 4 kg or less
Use the left suspension base for the upper right and the right suspension base for the upper left. Please provide 1 right and 1 left for each door.
Mounting screws included

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.18 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Door hinges / internal thread / zinc die-cast / GN 139.2 / GANTER

GANTER

With the exception of the connector plug, hinges without safety switch GN 139.2 do not differ in their external appearance from hinges with safety switch GN 139.1. With the concealed screw connection at the back, the hinge is also tamper-proof.
The compact design combines safety and attractive appearance.
The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	43.20 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-3 / TAKIGEN

TAKIGEN

[Features]
· It is made of all stainless steel and has excellent corrosion resistance

Volume Discount

Stock

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1117 / TAKIGEN

TAKIGEN

[Features]
· It is made of all stainless steel and has excellent corrosion resistance

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.95 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Block hinges with fastening nuts, long version (K1143)

KIPP

· Connect two fixed components flexibly to each other

· Application sectors: machine construction, furniture construction, doors, hatches, hoods

· Universal left and right application

· For overlying or inlying doors

· Fastening material included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Security hinge switch, form A, zinc, long version (27951)

NORELEM

· For monitoring the position of safety doors, protective covers and protective hoods

· Optimal integration into the surrounding construction

· Switching angle freely adjustable

· With mounting aid

· Greater protection against manipulation

Select to compare

Configure now
Starting from^∗ ：	187.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Corner hinges / conical countersinks / zinc die-cast / FB-613 / TAKIGEN

TAKIGEN

[Features] Ambidextrous type. [Features] for kitchen appliances, medical equipment, etc.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	19.80 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Lifting and lowering hinges / slotted holes / die-cast zinc / chrome-plated / FB-657 / TAKIGEN

TAKIGEN

[Features]
· Built-in cam that raises when opening the door.
· Open door to 90° or less, and it automatically closes.
· Open door at 90° or more, and it holds the door open.
· Left and right combination

Volume Discount

Stock

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	92.65 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

GH-456N Type <No Catch>/ GH-456C Type <With Catch> (For 6 mm Cover Door)

GH-456N Type / GH-456C Type (For 6 mm Cover Door)

SOWA

For glass thicknesses 5 to 8 mm
Applicable glass size width 600 mm, 15 kg or less
[Material] Made of brass (BRASS)
[Finish] SN (satin nickel) CR (chrome plating) GC (gold plating)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	97.03 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Door hinges / internal thread / zinc die-cast / GN 139.2, type AK,CK / GANTER

GANTER

Hinges GN 139.1 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO).
The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable (see contact travel diagram).
Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	170.88 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Block hinges with counterbore, long version (K1144)

KIPP

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	10.19 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pins stainless steel for hinge halves (27869)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	3.89 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Lifting and lowering hinges / slotted holes / 60°, 180° / zinc die-cast / chrome-plated / FB-612 / TAKIGEN

TAKIGEN

Automatically closes the door when it is opened 120° or less.

[Features]
· Built-in cam that raises when opening the door (FB-612).
· Automatically closes the door when it is opened 120° or less.
· Horizontal rotation (FB-612).
· No rising (FB-612-NLH).
· Left and right combination

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	86.93 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Corner hinges, plug-in / slotted holes / zinc / chrome-plated / FB-611 / TAKIGEN

TAKIGEN

[Features]
· Once the door opens the built-in cam automatically raises.
· Automatically closes the door when it is opened 120° or less.
· Horizontal rotation beyond that (FB-611· FB-611-H).
· Open door within 60° automatically closes, holds door open at 90°.
· (FB-611-S).
· The door automatically returns to 90° position from open door position between 90° and 120°.
· (FB-611-S).
· Theft prevention function that cannot be withdrawn when closed (FB-611-H, FB-611-S).
· Left and right combination

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	47.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lifting and lowering corner hinges / through holes, slotted holes / aluminium / FB-743 / TAKIGEN

TAKIGEN

[Product Information]
· <Common items>
· Body type: Special type
· Length L (mm): 158
· Material: Aluminum alloy
· Surface finish: Baked coating

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	31.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Corner hinges / conical recesses / rolled / stainless steel / cloth polished / FB-1615 / TAKIGEN

TAKIGEN

[Features]
· Made of stainless steel, with excellent corrosion resistance.
· Can hide screw with resin cover.
· Soft design resin cover that is well rounded and denatured PPE with excellent heat resistance (170°C) due to resin.
· Left and right combination

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	135.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Hinge pins / stainless steel / B-1099 / TAKIGEN

TAKIGEN

General-purpose stainless steel pin.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.09 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Multi-pivot hinges / tapered holes / 2-axis / rolled / 90°, 180° / stainless steel / barrel polished / B-1013 / TAKIGEN

TAKIGEN

[Product Information]
· <Common items>
· Body type: Special type
· Length L (mm): 40
· Surface finish: Barrel polishing
· Width W (mm): 70
· Plate thickness t (mm): 4

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Door wing hinges / conical countersinks / demountable / 180°, 270° / steel / zinc chromated / B-810 / TAKIGEN

TAKIGEN

[Features]
· Ideal for small and medium size doors.
· Left and right combination type (pin rearrangement).
· 180° opening (B-1810-1, B-810-1).
· 270° opening (B-1810-2, B-810-2)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	25.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Step hinges / rolled / stainless steel / barrel polished / B-1877 / TAKIGEN

TAKIGEN

[Features]
· Made of stainless steel, with excellent corrosion resistance.
· Welding the curled part

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	50.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flex hinges / with door leaf profile / aluminium, PU / Alumite / B-868-3 / 4 / TAKIGEN

TAKIGEN

[Features]
· Waterproof feature improved because there is no break in the hinge.
· Especially in swing-up door (flip-up type) it is most effective as rainwater, etc. does not flow in even when open.
· Length of the hinge can be arbitrarily cut.
· It is open at 80° in free state.
· There is no protrusion at the door, and the appearance is improved.
· 180° opening (ideal for side door, swing-up door)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	263.63 €
Min. Shipping Days ：	14 Days

*Unit price with basic configuration

Stainless-Steel Horizontal-Hanging Glass Hinge Series

999SHIMANO

■ Flat hinge portion: SUS304/HL
■ Absolutely no hole boring or other glass machining required.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.89 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Glass Hinge 5500-30-2 Type/3 Type/4 Type/5 Type

Glass Hinge 5500-30-2 Type/3 Type/4 Type/5 Type【2 Pieces Per Package】

SOWA

■ Uses press method so holes do not need to be formed in the glass
Material: Brass finish: chrome

Glass thicknesses For 4 to 8 mm
[5500-30-2 type glass hinge] Applicable door size: width 450 mm height 1300 mm or less, load capacity: 11 kg, weight: 315 g
[5500-30-3 type glass hinge] Applicable door size: width 400 mm height 600 mm or less, load capacity: 5 kg, weight: 135 g
For glass thicknesses 4 to 6 mm
[5500-30-4 type glass hinge] Applicable door size: width 300 mm height 400 mm or less load capacity: 3 kg, weight: 75g
[5500-30-5 type glass hinge] Applicable door size: width 200 mm height 300 mm or less load capacity: 2 kg, weight: 55 g

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	109.71 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

For Double Acting Spring Hinge Made Of Stainless Steel BK012-90 Type (Mount To Wall Type) (For Tempered Glass)

SOWA

· Double acting spring hinge made of stainless steel so can be used in proximity of water, such as a shower booth.
· Glass door automatically stops closing at approximately 25°
· No difference for use on right or left sides.
· Be sure to use at least 2.
· Hinge will open to approximately 90° but door will not close from this position. Provide a door stopper separately so the door does not open more than this.
· For cleaning use a neutral detergent, slightly basic detergent, or slightly acidic detergent.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	202.20 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Corner hinges / screw bolts / stainless steel / GN 129.5 / GANTER

GANTER

Stainless Steel-Hinges GN 129.5 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	28.12 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Hinge stops / taper countersinks / NBR / 25160.08xx / HALDER

HALDER

[Specifications]
・Product type: Hinge stops
・Holding plate materials: Steel investment casting. galvanised. plastic coated|. similar to RAL 9005. black. structural matt
・Stop: NBR

[Features]
・Stops are used in order to restrict the hinges pivot angle
・The component also acts as a damping stop element.

Select to compare

Configure now
Starting from^∗ ：	5.40 €
Min. Shipping Days ：	1 Day

*Unit price with basic configuration

Block hinges with fastening nuts, form A (27890)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	10.53 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Connectors with screw fitting, form A, straight bush (80150)

NORELEM

· Rated up to IP 67

· High temperature range

· With screw lock

· A coded

Select to compare

Configure now
Starting from^∗ ：	14.45 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Security hinge switch, additional hinge (K1499)

KIPP

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	45.15 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Hinge plate, steel or stainless steel (27616)

NORELEM

· Steel or stainless steel

· Bright

· Electro zinc-plated

Select to compare

Configure now
Starting from^∗ ：	5.88 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Hinge pins, polyamide green, sprung (27884)

NORELEM

· For right or left use.

· For interior doors

Select to compare

Configure now
Starting from^∗ ：	2.80 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Hinge, form A oval, stainless steel (27876-10)

NORELEM

· Connect two fixed components flexibly to each other

· Application sectors: food stuff, packaging, chemical and pharmaceutical industries.

· Polished or blasted.

Select to compare

Configure now
Starting from^∗ ：	44.45 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

End caps plastic for hinge halves, for aluminium profiles (27869)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	0.58 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Security hinge switch, form A, zinc (27950)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	182.53 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Hinge Nut for HHS/HHSK

MISUMI

[Features] Nut for flat hinges in stainless steel (HHS/HHSK).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.78 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Main Body Type
Length L *Figure in () is the min length of the adjustable type.(mm)
Operating Environment
Main Body Material
Main Body Surface Treatment
Width W(mm)
Additional Function
Reversed
Mounting Method
Mounting Screw Hole Type

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing
Brand	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	KIPP	TAKIGEN	TAKIGEN	GANTER	TAKIGEN	SOWA	GANTER	TAKIGEN	TAKIGEN	KIPP	NORELEM	TAKIGEN	TAKIGEN	SOWA	GANTER	KIPP	NORELEM	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	999SHIMANO	SOWA	SOWA	GANTER	HALDER	NORELEM	NORELEM	KIPP	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	MISUMI
Product Series	Multi-pivot hinges / 2-axis / 120°, 200° / stainless steel / FB-1729N / TAKIGEN	Multi-pivot hinges / cylinder countersinks / 2-axis / 104°, 194°, 210° / stainless steel / FB-1736 / TAKIGEN	Corner hinges / conical countersinks / 180° (90° detent) / zinc die-cast / B-845 / TAKIGEN	Step hinges / rolled / stainless steel / mirror polished / B-1028 / TAKIGEN	Hatch hinges / conical countersinks / zinc die-cast / chrome-plated / FB-930 / TAKIGEN	Block hinges with fastening nuts, Form B (K1142)	Flap hatch hinges / rolled / stainless steel / barrel polished / B-1057-5 / TAKIGEN	Corner hinges / internal thread / zinc die-cast / FB-735 / TAKIGEN	Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 138 / GANTER	Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-4 / TAKIGEN	Pivot Hinge PH (Flat) Type/PAW (Frame) Type/PAS (Front Surface) Type	Door hinges / internal thread / zinc die-cast / GN 139.2 / GANTER	Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-3 / TAKIGEN	Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1117 / TAKIGEN	Block hinges with fastening nuts, long version (K1143)	Security hinge switch, form A, zinc, long version (27951)	Corner hinges / conical countersinks / zinc die-cast / FB-613 / TAKIGEN	Lifting and lowering hinges / slotted holes / die-cast zinc / chrome-plated / FB-657 / TAKIGEN	GH-456N Type / GH-456C Type (For 6 mm Cover Door)	Door hinges / internal thread / zinc die-cast / GN 139.2, type AK,CK / GANTER	Block hinges with counterbore, long version (K1144)	Pins stainless steel for hinge halves (27869)	Lifting and lowering hinges / slotted holes / 60°, 180° / zinc die-cast / chrome-plated / FB-612 / TAKIGEN	Corner hinges, plug-in / slotted holes / zinc / chrome-plated / FB-611 / TAKIGEN	Lifting and lowering corner hinges / through holes, slotted holes / aluminium / FB-743 / TAKIGEN	Corner hinges / conical recesses / rolled / stainless steel / cloth polished / FB-1615 / TAKIGEN	Hinge pins / stainless steel / B-1099 / TAKIGEN	Multi-pivot hinges / tapered holes / 2-axis / rolled / 90°, 180° / stainless steel / barrel polished / B-1013 / TAKIGEN	Door wing hinges / conical countersinks / demountable / 180°, 270° / steel / zinc chromated / B-810 / TAKIGEN	Step hinges / rolled / stainless steel / barrel polished / B-1877 / TAKIGEN	Flex hinges / with door leaf profile / aluminium, PU / Alumite / B-868-3 / 4 / TAKIGEN	Stainless-Steel Horizontal-Hanging Glass Hinge Series	Glass Hinge 5500-30-2 Type/3 Type/4 Type/5 Type【2 Pieces Per Package】	For Double Acting Spring Hinge Made Of Stainless Steel BK012-90 Type (Mount To Wall Type) (For Tempered Glass)	Corner hinges / screw bolts / stainless steel / GN 129.5 / GANTER	Hinge stops / taper countersinks / NBR / 25160.08xx / HALDER	Block hinges with fastening nuts, form A (27890)	Connectors with screw fitting, form A, straight bush (80150)	Security hinge switch, additional hinge (K1499)	Hinge plate, steel or stainless steel (27616)	Hinge pins, polyamide green, sprung (27884)	Hinge, form A oval, stainless steel (27876-10)	End caps plastic for hinge halves, for aluminium profiles (27869)	Security hinge switch, form A, zinc (27950)	Hinge Nut for HHS/HHSK
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D		2D / 3D	3D	2D / 3D	2D / 3D		2D	2D		2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D				2D / 3D				2D / 3D						2D / 3D
Starting from^∗	116.61 € *Unit price with basic configuration Volume Discount	112.84 € *Unit price with basic configuration Volume Discount	23.04 € *Unit price with basic configuration Volume Discount	6.61 € *Unit price with basic configuration	36.26 € *Unit price with basic configuration	6.11 € *Unit price with basic configuration	6.86 € *Unit price with basic configuration Volume Discount	13.89 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.04 € *Unit price with basic configuration Volume Discount	6.23 € *Unit price with basic configuration Volume Discount	95.18 € *Unit price with basic configuration Volume Discount	43.20 € *Unit price with basic configuration Volume Discount	7.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	16.95 € *Unit price with basic configuration	11.67 € *Unit price with basic configuration	187.02 € *Unit price with basic configuration	19.80 € Special price *Unit price with basic configuration Promotional pricing	92.65 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	97.03 € *Unit price with basic configuration Volume Discount	170.88 € *Unit price with basic configuration Volume Discount	10.19 € *Unit price with basic configuration	3.89 € *Unit price with basic configuration	86.93 € *Unit price with basic configuration	47.85 € *Unit price with basic configuration	31.19 € *Unit price with basic configuration	135.48 € *Unit price with basic configuration	2.09 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.10 € *Unit price with basic configuration	25.40 € *Unit price with basic configuration	50.75 € *Unit price with basic configuration	263.63 € *Unit price with basic configuration	27.89 € *Unit price with basic configuration Volume Discount	109.71 € *Unit price with basic configuration Volume Discount	202.20 € *Unit price with basic configuration Volume Discount	28.12 € *Unit price with basic configuration Volume Discount	5.40 € *Unit price with basic configuration	10.53 € *Unit price with basic configuration	14.45 € *Unit price with basic configuration	45.15 € *Unit price with basic configuration	5.88 € *Unit price with basic configuration	2.80 € *Unit price with basic configuration	44.45 € *Unit price with basic configuration	0.58 € *Unit price with basic configuration	182.53 € *Unit price with basic configuration	2.78 € Special price *Unit price with basic configuration Promotional pricing Volume Discount
Min. Shipping Days	Same day	Same day	Same day	6 Days	6 Days	4 Days	6 Days	Same day	7 Days	Same day	10 Days	7 Days	Same day	6 Days	4 Days	4 Days	Same day	Same day	11 Days	7 Days	4 Days	4 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	14 Days	8 Days	10 Days	12 Days	7 Days	1 Day	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	Same day
Specifications								Stock					Stock					Stock
Main Body Type	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	-	Pivot Type	Special Shape	-	Pivot Type	Pivot Type	-	Pivot Type	Pivot Type	-	-	Special Shape	Pivot Type	Glass Hinges	-	-	-	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Glass Hinges	Glass Hinges	Glass Hinges	-	-	-	-	-	-	-	-	-	-	Related Components
Length L *Figure in () is the min length of the adjustable type.(mm)	75 ～ 124	138 ～ 200	75	60	96	-	70	40 ～ 70	42 ～ 62	61	50 ～ 95	101	40.5	75	-	-	100 ～ 127	97	45	101	-	-	183	140 ～ 162	158	155	45 ～ 113	40	150	107	2500	-	19 ～ 32	90	-	-	-	-	-	-	-	-	-	-	-
Operating Environment	-	Standard / Corrosion Resistance	-	-	-	-	-	-	-	-	Standard	-	-	-	-	-	-	-	Standard	-	-	-	Standard	-	-	-	-	-	-	-	-	-	Standard	Standard / Corrosion Resistance	-	-	-	-	-	-	-	-	-	-	-
Main Body Material	-	-	Zinc Alloy	Stainless Steel	Zinc Alloy	Stainless Steel / Steel	Stainless Steel	Zinc Alloy	Zinc Alloy	-	Brass	-	-	-	Stainless Steel / Steel	-	Zinc Alloy	Zinc Alloy	Brass	-	-	-	Zinc Alloy	Zinc Alloy	Aluminum	-	-	-	-	Stainless Steel	Aluminum	Stainless Steel	Brass	Stainless Steel	Stainless Steel	-	Stainless Steel / Steel	-	-	-	-	-	-	-	Stainless Steel
Main Body Surface Treatment	Mirror Surface	Mirror Surface	Chrome Plating	Mirror Surface	Chrome Plating	-	Tumble Polish	Chrome Plating	-	Tumble Polish	-	-	Tumble Polish	Tumble Polish	-	-	Chrome Plating	Chrome Plating	Chrome Plating / Gold Plating / Satin	-	-	-	Chrome Plating	Chrome Plating	Coating	Mirror Surface	Not Provided	Tumble Polish	Colored Chromate	Tumble Polish	Clear Anodize	Buffed Surface / Brushed	Chrome Plating	Satin / Mirror Surface	-	-	-	-	-	-	-	-	-	-	-
Width W(mm)	48 ～ 82	88 ～ 168	20	40	116	25.3 ～ 32.4	18	19 ～ 33.5	40 ～ 60	11.5	13 ～ 80	49 ～ 79	18	12	40 ～ 51	-	17.5	83	45	49 ～ 79	85	-	67	26 ～ 28.5	-	29	-	70	87	110	24	-	17 ～ 60	-	-	-	39 ～ 49	-	116	-	-	-	-	-	-
Additional Function	-	Not Provided	-	-	-	-	-	-	-	-	Not Provided	-	-	-	-	-	-	-	Not Provided / With Catches	-	-	-	-	-	-	-	-	-	-	-	-	-	Not Provided	With Stopper	-	-	-	-	-	-	-	-	-	-	-
Reversed	-	-	-	-	-	-	-	-	-	-	For Both Right and Left Sides	-	-	-	-	-	-	-	For Both Right and Left Sides	-	-	-	-	-	For Right Side	-	-	-	-	-	-	-	For Both Right and Left Sides	For Both Right and Left Sides	-	-	-	-	-	-	-	-	-	-	-
Mounting Method	-	-	-	-	-	-	-	-	-	-	Screw Mounting	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Others	Screw Mounting	-	-	-	-	-	-	-	-	-	-	-
Mounting Screw Hole Type	-	-	-	-	-	-	-	-	-	-	Countersunk Holes	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	With Screws	Countersunk Holes	-	-	-	-	-	-	-	-	-	-	-

1
2
3
4
Next >>

Filter by:

Stock

- Show only stock items
Clear

Main Body Type
Images

Clear

Length L *Figure in () is the min length of the adjustable type.(mm)
6

6.5

19

32

33

36

40

40.5

42

44

45

48

50

51

52

55

56

60

61

62

65

70

72

75

76

77

80

82

84

85

90

94

95

96

97

100

101

102

104

106

107

108

113

115

124

125

126

127

138

140

150

155

158

161

162

170

183

200

224

1000

2500
Drawing

Clear

Operating Environment
- Standard
- Corrosion Resistance
Clear

Main Body Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Zinc Alloy
- Resin
Clear

Main Body Surface Treatment
- Not Provided
- Buffed Surface
- Tumble Polish
- Chrome Plating
- Colored Chromate
- Brushed
- Clear Anodize
- Gold Plating
- Satin
- Coating
- Mirror Surface
Clear

Width W(mm)
6

11.5

12

13

14

15

16

17

17.5

18

19

20

21

22

24

25

25.3

26

27

28.5

29

29.5

30

32.4

33.5

39

40

40.2

42

45

47.8

48

49

50

51

53

57

60

61

62

63

65

66

67

68

70

71

72

76

78

79

80

82

83

85

87

88

91

100

101

102.5

110

114

116

125

168

170

180
Drawing

Clear