Detecting Devices

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 12 Days or Less 22 Days or Less 26 Days or Less

?* Information on days to ship and prices

• 

  HYDAC Clogging Indicator VR

  HYDAC

  [Specifications]
  ・Type: VR
  ・Type of connection: AG
  ・Sealing material: NBR
  
  Clogging indicators.

  Select to compare

  Configure now
  Starting from∗ ：	64.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  BOSCH REXROTH Float Switch ABZMS-35 / NCC, NOC

  BOSCH REXROTH

  [Specifications]
  ・Type: ABZMS
  ・Switching contact L1: NCC
  ・Switching contact L2: NOC
  ・Maximum operating pressure bar:1
  ・Sealing material: NBR
  
  [Features]
  ・Float switches are switching devices, which are operated by a float that is moved by a fluid. They are used for the regulation of fluid levels in reservoirs of type ABSKG ... small power units, sizes 10; 20; 40 and 60, according to data sheet RE 51013.
  ・Two firmly set reed contacts (normally closed and normally open), which are switched by permanent magnets integrated in the float, are provided in the sliding tubes.
  ・For monitoring the max. hydraulic fluid temperature, firmly set temperature contacts (option) are installed.

  Select to compare

  Configure now
  Starting from∗ ：	215.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HYDAC Fluid level control FSK

  HYDAC

  [Specifications]
  ・Type: FSK
  ・Sealing material: FKM (formerly FPM)
  
  Fluid level sensors are designed to monitor the level of media in your container. One or more switching signals can be detected and forwarded as a warning message via an electrical signal for level regulation or sent directly to a PLC controller.

  Select to compare

  Configure now
  Starting from∗ ：	226.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Digital Gap Checker, 3-Colour Display, with Control Unit, ISA3 Series

  SMC

  SMC Gap Checker.
  [Features]
  · At-a-glance checking of whether the workpiece is placed correctly or not.
  · Allows you to intuitively know how much of a gap there is between the workpiece and the detecting surface.
  · Easy setting: Allows you to change the settings and see the values change on the display.
  · Energy-saving type: Air consumption reduced by 60%.
  · Improved drainage resistance: by 10 times or more.
  [Applications]
  · Checking the reference plane for the press fitting of shafts.
  · Confirmation of close contact with the reference plane for machining.
  · Confirmation of close contact with the workpiece for machining.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	354.87 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  HYDAC Clogging Indicator VMF

  HYDAC

  [Specifications]
  ・Type of connection: AG
  ・Type: VMF
  ・Sealing material: NBR
  ・Connection size: G1/8
  
  Clogging indicators.

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  HYDAC Clogging Indicator VM

  HYDAC

  [Specifications]
  ・Type of connection: AG
  ・Type: VM
  ・Sealing material: NBR
  ・Connection size: G1/2
  
  Clogging indicators.

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  HYDAC Clogging Indicator VD

  HYDAC

  [Specifications]
  ・Type of connection: AG
  ・Type: VD
  ・Sealing material: NBR
  ・Connection size: G1/2
  
  Clogging indicators.

  Select to compare

  Configure now
  Starting from∗ ：	37.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HYDAC Clogging Indicator V02

  HYDAC

  [Specifications]
  ・Type of connection: IG
  ・Type: V02
  ・Sealing material: NBR
  ・Connection size: G1/4
  ・Maximum operating pressure (bar): 100
  
  Clogging indicators.

  Select to compare

  Configure now
  Starting from∗ ：	1,127.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Positioning Sensors, self-aligning, pneumatic

  HALDER

  Used in jigs and fixtures as positioning control for raw workpieces.
  Contact control is achieved through compressed air backwash and is indicated on the monitoring unit.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	65.88 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  BOSCH REXROTH Float Switch ABZMS-37 / Device plug 04pol M12x1 / with adapter flange

  BOSCH REXROTH

  [Specifications]
  ・Type: ABZMS
  ・Electrical connection: Device plug 04pol M12x1
  ・Filter fineness in µm: 3
  ・Maximum operating pressure bar: 1
  ・Sealing material: FKM
  ・Option 1: with adapter flange
  
  [Features]
  ・Float switches are switching devices which are actuated by a float moved by a fluid. They are used for regulating fill levels in tanks of power units
  ・Float switch type ...R consisting of a breather filter, a resistance measuring chain for level, a resistance thermometer for temperature with analog output of 4 to 20 mA, and an analog temperature indicator

  Select to compare

  Configure now
  Starting from∗ ：	1,715.91 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HYDAC Clogging Indicator VRD

  HYDAC

  [Specifications]
  ・Type of connection: AG
  ・Type: VRD
  ・Sealing material: NBR
  ・Connection size: G1/8
  
  Clogging indicators.

  Select to compare

  Configure now
  Starting from∗ ：	98.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HYDAC Liquid Level Indicator FSA

  HYDAC

  [Specifications]
  ・Type: FSA
  ・Sealing material: NBR, FKM (formerly FPM)
  
  Fluid level sensors are designed to monitor the level of media in your container. One or more switching signals can be detected and forwarded as a warning message via an electrical signal for level regulation or sent directly to a PLC controller.

  Select to compare

  Configure now
  Starting from∗ ：	36.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HYDAC Pressure and Absolute Pressure Transducer HDA 4300

  HYDAC

  [Specifications]
  ・Type: HDA 4300
  ・Sealing material: FPM
  
  Ceramic measuring sensor with thick-film strain gauge.

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Pneumatic Precision Seating Check Air Microsensor

  METROL

  CNC accurately prevents occurrence of defective products of machine tools. Detects the lifting of workpieces due to chipping with a ±0.5 μm - repetition accuracy

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	533.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Positioning Sensors, pneumatic

  HALDER

  Used in jigs and fixtures as positioning control for pre-machined workpieces.
  Sensitivity accuracy 0,015 - 0,075 mm depending on the workpiece surface.
  Contact control by the compressed-air backwash, indicated on the monitoring unit (Art. No. 22800.0612).

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.19 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Digital Gap Checker, 3-Colour Display, without Control Unit, ISA3 Series

  SMC

  Gap checker for at-a-glance checking of whether the workpiece is placed correctly or not.
  [Features]
  · Without control unit.
  · Allows you to intuitively know how much of a gap there is between the workpiece and the detecting surface.
  · Allows you to change the settings and see the values change on the display.
  · Energy-saving type, with air consumption reduced by 60%.
  · Drainage resistance increased by 10 times or more.
  [Applications]
  · Checking the reference plane for the press fitting of shafts, confirmation of close contact with the reference plane for machining, and confirmation of close contact with the workpiece for machining.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	211.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  BOSCH REXROTH Pressure Transducer HM20-2X

  BOSCH REXROTH

  [Specifications]
  ・Type: HM20
  ・Device series: 2X
  ・Device plug: Device plug, 4-pin, M12x1
  ・Temperature range from/to(°C): -40 to +85
  
  [Features]
  ・Measuring pressures in hydraulic systems
  ・8 measurement ranges up to 630 bar
  ・Sensor with thin film measuring cell
  ・Components that are in contact with the media are made of stainless steel
  ・Operational safety due to high bursting pressure, reversed polarity, overvoltage and short-circuit protection
  ・Characteristic curve deviation <0.5%
  ・Non-repeatability <±0.05%
  ・Ambient temperature range –40 ... +85 ℃
  ・Marine approval DNV for all variants with current output

  Select to compare

  Configure now
  Starting from∗ ：	521.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...