Dryers (Control SideNominal Pipe Threads: 1 1/2)
Dryers, also called air dryers, are devices that remove moisture from compressed air and blow out dried air. Moisture in compressed air can have a negative effect on machine cylinders, valves, solenoid valves or other parts, which may result in failure. Water sprayed from air blow guns or moisture mixed into paint may also cause problems. As such, a dryer is usually installed in an air compressor as standard. The refrigerating system cools the air, like an air conditioner or refrigerator, and condenses or discharges moisture to dry the air. In an adsorption type, the moisture in the air is sucked out using a desiccant such as silica gel or molecular sieves. The membrane removes moisture by feeding the air through hollow fibers made from a polymer film that is easy for moisture to pass through but difficult for air to pass through.
3 artículos
* Información sobre días de envío, gastos de envío y precios
SMC
Refrigerated Air Dryer IDFA60 / 70 / 80 / 90 Series for Use in Europe, Asia and Oceania
This is a Refrigerated Air Dryer IDFA60/70/80/90 Series for Use in Europe, Asia and Oceania.[Features]・ Usable in high temperature environments・ Increased air flow rate capacity・ A new stainless steel heat exchanger is used to reduce loads on the refrigerator・ Improved maintainability・ Improved resistance to contaminants and longer lifespan for the auto drain valve・ It protects pneumatic equipment from moistureMás informaciónType Method Shape Unit combination Exit Flow Rate [Distinction](l/min) Exit Flow Rate(l/min) Exit Air Atmospheric Pressure Dew Point(°C) Supply Side, Connection Type Air Temperature at the Inlet Port(°C) Dryer Refrigerating type Standard - More than 5000 5200 ～ 8000 3 ～ 7 Rc(R) 35 ConfigurarPrecio normal (IVA no incluidos):4,128.80 €Fecha de envío normal:4 días laborables
SMC
Refrigerated Air Dryer Standard Temperature Air Inlet, IDF□E Series
Refrigerated air dryer with improved corrosion resistance due to the use of a stainless-steel heat exchanger. [Features] · Protects pneumatic equipment from moisture. · Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail. · Air flow capacity increased up to 40%. · Power consumption reduced up to 40%. · Energy-saving design. · Exhaust heat reduced by 25%, controlling increases in ambient temperature (air-cooled specification) and reducing heat discharging water amount (water-cooled specification). · Inlet air temperature: 35°C (22E, 37E) / 40°C (55E, 75E). · Outlet air pressure dew point: 10°C.Más informaciónType Method Shape Unit combination Exit Flow Rate [Distinction](l/min) Exit Flow Rate(l/min) Exit Air Atmospheric Pressure Dew Point(°C) Supply Side, Connection Type Air Temperature at the Inlet Port(°C) Dryer Refrigerating type Standard - More than 5000 5,700 ～ 6,100 10 Rc(R) 35 ConfigurarPrecio normal (IVA no incluidos):6,747.23 €Fecha de envío normal:98 días laborables
SMC
IDFA3~75E, Refrigerated Air Dryer
Refrigerated air dryer with improved corrosion resistance due to the use of a stainless-steel heat exchanger. [Features] · Power supply voltage: Single-phase 230 V AC (50 Hz). · Auto drain: Float type (normally open). · Coating color: Body panel: urban white 1, Base: urban gray 2. · Compliant standards: EC directive (CE marking).Más informaciónType Method Shape Unit combination Exit Flow Rate [Distinction](l/min) Exit Flow Rate(l/min) Exit Air Atmospheric Pressure Dew Point(°C) Supply Side, Connection Type Air Temperature at the Inlet Port(°C) - Refrigerating type Standard - More than 5000 4,550 ～ 6,366 3 ～ 10 Rc(R) 35 ConfigurarPrecio normal (IVA no incluidos):3,748.79 €～Fecha de envío normal:26 días laborables