Conduit（Properties：Heat Resistance）

?* Information on days to ship and prices

• 

  Heat Resistant Duct Hoses / For Hot Air Generating Units

  MISUMI

  [Features] A heat resistant duct hose. -Cutting service is available.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Tie Duct Hose Anti-wear GL Type

  TIGERS POLYMER

  A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
  
  [Features]
  · Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
  Has superior conductivity and a static band prevention effect.
  · Has superior weather resistance.
  · Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Duct Hose Duct N.S.D.

  KANAFLEX CORPORATION

  The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
  
  [Features]
  · The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
  · Easy to carry to increase work efficiency.
  · The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
  · In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
  · The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Duct Pipe Hose - Rigid Duct N.S.

  KANAFLEX CORPORATION

  [Features]
  · PVC Product.
  · Excellent heat resistance.
  · Structure has less bends due to temperature change.
  · Flexible bendable hose.
  · At least 10% lighter than existing hard ducts.
  · Up to 50% elastic so as not to damage the airtightness.
  · Aperture will change just by twisting the opening of the duct.
  · Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
  · Cutting and mounting are easy and piping work can be performed easily.

  Select to compare

  Configure now
  Min. Shipping Days ：	56 Days

• 

  TAC Duct Aluminum

  TOTAKU INDUSTRIES

  For ventilator ducts and air conditioning in housing, apartments, stores, etc. Flexible, bendable piping for easy use in narrow spaces. Can be shortened to around 1/5 of its original length for compact storage.
  
  [Features]
  · Superior in terms of flexibility and bending properties, so it can be laid in narrow spaces.
  · TAC Duct Aluminum can be compressed to 1/5 of its original length, while TAC Duct Aluminum 2 can be compressed to 1/10 of its original length, allowing compact, space-saving storage.
  · Repeatedly bendable. Excellent heat resistance (up to 80°C)

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Heran Duct

  TOTAKU INDUSTRIES

  Duct hose with 2 times the wear resistance of TAC ducting (according to internally conducted testing). Superior cold and heat resistance and anti-static properties. Duct hose not easily subject to ozone cracking.
  
  [Features]
  Is wear resistant and has superior cold and heat resistance (operating temperature range is -30°C to 80°C).
  · Duct hose with superior anti-static properties (material volume resistivity/105 Ω-cm or less).
  · Duct hose resistant to ozone cracking that can occurs in conventional rubber hoses

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  TAC Heat-Resistant Duct IT-13 (Free Piping)

  TOTAKU INDUSTRIES

  [Features]
  - Duct formed with aluminum polyester cloth and zinc-plated steel. Supports temperatures of 130°C or below.
  - Uses special laminated film to reduce particles created by surface friction.
  - Flexible and easy to store/transport.

  Select to compare

  Configure now
  Starting from∗ ：	219.58 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  TAC Heat-Resistant Duct MD-18 (Fixed Piping)

  TOTAKU INDUSTRIES

  [Features]
  · A reinforcing core of galvanized steel sheeting, glass cloth and aluminum foil is used, making possible use at temperatures of 180°C or lower.
  · Flexible and easy to store and transport (avoid repeated expansion and contraction)
  · The aluminum glass cloth sheeting used is highly flame-resistant (Flameproof Grade 1).

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Heat-Resistant Duct MD-25 (Free Piping)

  TOTAKU INDUSTRIES

  [Features]
  · Uses specially coated glass cloth and a stainless steel plate (SUS304) reinforcing core, and can be used at 250°C or below.
  · Flexible and easy to store and transport.
  · The specially coated glass cloth used for the product has excellent flame retardant properties (product passed level 1 fireproofing testing)

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Heat-Resistant Duct MD-45 (Fixed Piping)

  TOTAKU INDUSTRIES

  [Features]
  · All of components used are made of stainless steel (SUS304), have superior heat resistance performance, and can be used at 450°C or below.
  · The materials are not prone to corrosion even from gases containing acids, alkaline substances, solvents, etc.
  · This product is designed for fixed piping, but it is also possible to create bends (repeated bending is not supported).

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  Tiflex Hose, AP Type

  TIGERS POLYMER

  Flexible and lightweight hose with an allowable continuous service temperature of 100℃ and below. Airtight.
  
  [Features]
  ･ Heat-resistant flexible hose made from olefin resin and aluminum foil from a special laminating process.
  ･ The special laminated aluminum foil is inserted in an inner-outer surface of an olefin resin for superior airtightness.
  · Flexible, lightweight with superior workability.
  · The allowable continuous service temperature is 100˚C or less

  Select to compare

  Configure now
  Starting from∗ ：	91.76 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tie Flex Hose V Shaped PAL Type

  TIGERS POLYMER

  Lightweight and telescopes freely, can be used continuously at a temperature of 130°C or less.
  
  [Features]
  Flexible hose for heat resistance configured from special laminated aluminum foil and a zinc-plated steel plate.
  Because it is lightweight and telescopes freely, it is easy to stow, store, and transport.
  · The allowable continuous operating temperature is 130˚C or less.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	70.53 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tiflex Hose V Model AG Type

  TIGERS POLYMER

  Lightweight and with excellent flame and heat resistance. The material used for the product is a flameproof grade 1 material as stipulated in JIS A 1322. The continuous operating temperature is up to 180°C.
  
  [Features]
  · Heat resistant flexible hose made of specially laminated aluminum foil, glass cloth, and galvanized steel plate.
  · Lightweight and with excellent flame and heat resistance.
  · The continuous operating temperature is up to 180˚C.
  · The aluminum and the glass cloth sheet are flameproof grade 1 materials as stipulated in JIS A1322.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	118.25 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tie Flexible Hose V Model FP Type

  TIGERS POLYMER

  The hose is flexible and the material used for the product is a flameproof Grade 1 material as stipulated in JIS A 1322.
  
  [Features]
  · Made of special coating glass cloth and stainless steel plate (SUS304).
  · Easy to stow, store and transport because it can be extended or retracted as and when required.
  · The allowable continuous operating temperature is 250°C or less.
  · Can be used at higher temperatures than PAL, AG types.
  · The material used, which is a specially coated glass cloth, is a flameproof Grade 1 materials as per JISA1322.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	237.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tie Flexible Hose, V Type, SUS Type

  TIGERS POLYMER

  Uses all stainless steel (SUS304). Continuous operating temperature of up to 400℃.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	116.37 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Silicon Duct Hose SRDH, TS Type/ GS Type

  TIGERS POLYMER

  This duct hose is airtight and heat resistant (150 - 200 °C). It can be used in temperatures as low as -50°C.

  Select to compare

  Configure now
  Starting from∗ ：	126.35 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  TiFlex NH-1 Type

  TIGERS POLYMER

  Excellent expansion/contraction, bending, and thermal insulation. Non-combustible material certified by the Japan Ministry of Land, Infrastructure, Transport and Tourism.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Duct Hose Fujin

  ORIENT CORPORATION

  Glass fiber reinforced aluminum metalized film is used as a surface material. Product features superior fire resistance and cracks will not spread even when the product is damaged. Furthermore, air leakage is prevented by the inner surface material, even when the outer surface material is damaged.
  
  [Features]
  · Glass fiber reinforced aluminum metalized film is used as a surface material, so the product features fire resistance which is superior to standard resin jackets and cracks will not spread even when the product is heavily damaged.
  · A polyethylene terephthalate film is used for the inner surface material, so no air leakage from the inside occurs and air leakage is prevented even when the outside surface material is damaged.
  · Additionally, moisture does not pass through, so this product can also be used to transfer humidified air.
  · The entire body is covered with spiral-shaped steel wire, so the product maintains its shape and static pressure loss is prevented.
  · The product can be cut to the required length, so custom on-site sizing is possible.
  · Features good construction efficiency, so overall cost reduction can be achieved by significantly reducing work time.

  Select to compare

  Configure now
  Starting from∗ ：	109.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Duct Hose Goku

  ORIENT CORPORATION

  The Goku is lightweight, its 3 layers of aluminum foil and narrow-pitch high carbon steel wires machined with unique technology. Flexible to all specific on-site construction demands; its composition ensures it won't lose its shape.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	60.65 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  O-FLEX TUBE CA Series

  OHTSUKA

  [Features]
  • Heat resistance with continuous 250°C , 1h 250°C .
  • Vibration resistance.
  · Compressive strength 200N or higher

  Select to compare

  Configure now
  Starting from∗ ：	133.68 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...