Indexing Plungers（Page 3）

?* Information on days to ship and prices

• • Promotional pricing

  

  Indexing Plungers IPW

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mounting Blocks For Index Plungers And Bolts, Die-Cast

  HALDER

  [Features]
  · Can be used for mounting index bolts and for expanding applications.
  · Can also be used for mounting locating bushing EH22120.
  · Operating temperature range: maximum 100°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.27 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Plungers For Thin-Walled Pieces

  HALDER

  [Features]
  · Index bolt for through holes in thin sheets.
  · A fixing sleeve can be used to mount sheets 1 to 5 mm thick
  · For types with locks, pulling the knob and rotating it 90 degrees locks the mechanism with the notch.
  · For this element, depending on the thickness of the opposing part, the pin may not fit fully into the notch, even if the knob is pulled all the way out.
  · Operating temperature range: from -30 to +80°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.34 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Bolts With Flange

  HALDER

  [Features]
  · For index holes.
  · With flanges for mounting in a horizontal position.
  · Mounting holes feature double grease seals and thus can be mounted in both directions.
  · The operating temperature range of the plastic cap is from -30 to +80°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Distance Collar For Index Plungers

  HALDER

  [Features]
  · Use this distance collar to adjust index bolt screw-in depth.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.59 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Cam action indexing plungers with flange / SW, black, textured finish

  GANTER

  Cam action indexing plungers GN 612.10 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Cam action indexing plungers, Steel

  GANTER

  Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plunger, Steel / Plastic knob

  GANTER

  Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Plunger Stainless Steel

  GANTER

  Stainless Steel-Indexing plungers GN 608.5 are distinguished for their small dimensions.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Plunger Steel

  GANTER

  Indexing plungers GN 608 are distinguished for their small dimensions.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers Zinc die casting / Plastic-knob

  GANTER

  Mini indexing plungers GN 822.8 are distinguished for their small dimensions. They are mounted by countersunk screws.
  The mini indexing plungers present an affordable alternative to the GN 608 and GN 608.1 indexing plungers.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring bolts, Stainless Steel / Plastic knob

  GANTER

  The plunger of the Stainless Steel-Spring bolts GN 313 does not protrude in the inoperative position.
  It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
  Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Cam action indexing plungers, without locking function

  GANTER

  For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
  When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without rest position

  GANTER

  GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Mini indexing plungers, with and without rest position

  GANTER

  Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.
  The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.
  In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  PMT.100 - Indexing plungers -SUPER-technopolymer body

  ELESA

  Indexing plungers with threaded body in glass fibre reinforced polyamide-based SUPER-technopolymer, plunger in hardened and burnished steel or AISI 303 stainless steel, knob in high-resilience polyamide-based technopolymer in black or red RAL 3000, spring in stainless steel AISI 302 and locking nut in glass fibre reinforced polyamide-based SUPER-technopolymer.
  Thanks to the low coefficient of friction of the material, the application of lubricating grease is not required.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  PMT.110 - Indexing plungers -SUPER-technopolymer body

  ELESA

  Indexing plungers with glass-fibre reinforced polyamide based SUPER-technopolymer threaded body, black-oxide hardened steel or AISI 303 stainless steel plunger, high-resilience polyamide based technopolymer knob, grey-black colour, AISI 302 stainless steel spring and glass-fibre reinforced polyamide based SUPER-technopolymer locking nut.
  Thanks to the low coefficient of friction of the material, the application of lubricating grease is not required.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Knob for Press Fit Indexing Plunger

  MISUMI

  [Features] This knob can be used for indexing Plunger Pressfit type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.54 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PSX

  NABEYA BI-TECH

  Short type that can be mounted directly to a thin frame.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger - PFX

  NABEYA BI-TECH

  [Features]
  · A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
  · The long pin type PFX-H-A (long pin type) is ideal for mounting thick panels and frames etc.
  · The pin has undergone hardening and offers excellent abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PLY

  NABEYA BI-TECH

  Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.93 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers Simple Type IP

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers Simple Lock Type IPL

  KONISHI MFG

  Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers Without Hexagonal Collar IPN, IPN-Sus

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions. All screws are embedded into the device, only leaving the knob on the surface and making it look more attractive.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-6

  KONISHI MFG

  Indexing plungers with no tee handle attached to the knob.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-3

  KONISHI MFG

  This is a buttonless indexing plunger (IP-3). A lock nut is included.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-4

  KONISHI MFG

  This is a buttonless indexing plunger (IP-4). A lock nut is included.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger (Stainless Steel) IP-1-Sus

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Bolts Without Thread, Weldable

  HALDER

  [Features]
  · For index holes.
  · Fixed by welding or bonding.
  · Operating temperature range is from ‐30 to +80°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Lateral Spring Plungers

  HALDER

  To be used for positioning and applying pressure, e.g. during painting and sandblasting.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamping knobs with indexing plunger

  GANTER

  Clamping knobs with indexing plunger GN 7336.7 are used for positioning, securing and clamping adjusting elements at the same time.
  The axial movement of the handle (pulling) pulls the indexing pin from the engaged position against the spring force, with the star know at the same time remaining connected with form-lock to the clamping screw via a hexagonal element, allowing both clamping and releasing.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers for thin walled equipment

  GANTER

  Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
  It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
  For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers for welding, without rest position

  GANTER

  Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
  The lug d2 is intended for positioning.
  The plastic knob with the in-moulded indexing pin is driven on after the welding process.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers without thread, Steel / Plastic knob

  GANTER

  Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
  Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, plunger conical

  GANTER

  Indexing plungers GN 817.5 allow highly accurate positioning, with the guidance made by the positioning bushings DIN 172 / DIN 179 with cylindrical bore. The actual indexing bore is fitted with positioning bushings GN 172.1 / GN 179.1 with conical bores.
  The conical shape of the indexing pin / the indexing bore makes the positioning virtually clearance-free and therefore highly precise.
  Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Stainless Steel / Plastic-knob / with rest position

  GANTER

  Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Stainless Steel / Plastic-knob / without rest position

  GANTER

  Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
  The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel / long Plastic-knob

  GANTER

  Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
  Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel / Plastic-knob / with rest position

  GANTER

  Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel / Plastic-knob / without rest position

  GANTER

  Indexing plungers GN 607 are distinguished for their small dimensions.
  The extremely low lock nuts GN 909 enlarge the mounting options.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Cam action indexing plungers, with locking function

  GANTER

  For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
  When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers / with lever, with and without rest position / GN 7017

  GANTER

  GN 7017 Stainless Steel-Indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers with T-handle

  GANTER

  Stainless Steel-Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
  This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
  Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...