Cutting punches in special shapes / forcing pin / TiCN, HW, WPC (Part Numbers - CAD Download)

Click on this image to zoom in.

MISUMI

SKD11
POWDER HSS
TiCN
HW
WPC

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
H-PJ6H5-[40-80/10]-P[2-4.9/0.01]-W[2-4.9/0.01]-R0
H-PJ6H5-[40-80/10]-P[2-4.9/0.01]-W[2-4.9/0.01]-R[0.2-40/0.01]
H-PJ6H5-LC[37-79.9/0.1]-P[2-4.9/0.01]-W[2-4.9/0.01]-R0
H-PJ6H5-LC[37-79.9/0.1]-P[2-4.9/0.01]-W[2-4.9/0.01]-R[0.2-40/0.01]
H-PJ6H6-[40-80/10]-P[2-5.9/0.01]-W[2-5.9/0.01]-R0
H-PJ6H6-[40-80/10]-P[2-5.9/0.01]-W[2-5.9/0.01]-R[0.2-40/0.01]
H-PJ6H6-LC[37-79.9/0.1]-P[2-5.9/0.01]-W[2-5.9/0.01]-R0
H-PJ6H6-LC[37-79.9/0.1]-P[2-5.9/0.01]-W[2-5.9/0.01]-R[0.2-40/0.01]
H-PJ6H8-[40-100/10]-P[3-7.9/0.01]-W[3-7.9/0.01]-R0
H-PJ6H8-[40-100/10]-P[3-7.9/0.01]-W[3-7.9/0.01]-R[0.2-40/0.01]
H-PJ6H8-LC[37-99.9/0.1]-P[3-7.9/0.01]-W[3-7.9/0.01]-R0
H-PJ6H8-LC[37-99.9/0.1]-P[3-7.9/0.01]-W[3-7.9/0.01]-R[0.2-40/0.01]
H-PJ6H10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-R0
H-PJ6H10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-R[0.2-40/0.01]
H-PJ6H10-LC[37-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-R0
H-PJ6H10-LC[37-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-R[0.2-40/0.01]
H-PJ6H13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R0
H-PJ6H13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]
H-PJ6H13-LC[37-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R0
H-PJ6H13-LC[37-99.9/0.1]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]
H-PJ6H16-[40-100/10]-P[6-15.9/0.01]-W[6-15.9/0.01]-R0
H-PJ6H16-[40-100/10]-P[6-15.9/0.01]-W[6-15.9/0.01]-R[0.2-40/0.01]
H-PJ6H16-LC[37-99.9/0.1]-P[6-15.9/0.01]-W[6-15.9/0.01]-R0
H-PJ6H16-LC[37-99.9/0.1]-P[6-15.9/0.01]-W[6-15.9/0.01]-R[0.2-40/0.01]
H-PJ6H20-[40-100/10]-P[6-19.9/0.01]-W[6-19.9/0.01]-R0
H-PJ6H20-[40-100/10]-P[6-19.9/0.01]-W[6-19.9/0.01]-R[0.2-40/0.01]
H-PJ6H20-LC[37-99.9/0.1]-P[6-19.9/0.01]-W[6-19.9/0.01]-R0
H-PJ6H20-LC[37-99.9/0.1]-P[6-19.9/0.01]-W[6-19.9/0.01]-R[0.2-40/0.01]
H-PJ6H25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0
H-PJ6H25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]
H-PJ6H25-LC[37-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R0
H-PJ6H25-LC[37-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H10-[60-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H10-LC[50-100/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H13-[60-100/10]-P[6-12.9/0.01]-W[6-12.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H13-LC[50-100/0.1]-P[6-12.9/0.01]-W[6-12.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H16-[60-100/10]-P[6-15.9/0.01]-W[6-15.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H16-LC[50-100/0.1]-P[6-15.9/0.01]-W[6-15.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H20-[60-100/10]-P[6-19.9/0.01]-W[6-19.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H20-LC[50-100/0.1]-P[6-19.9/0.01]-W[6-19.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H25-[60-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]
H-SJ-C6H25-LC[50-100/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-R[0.2-40/0.01]
HW-PJ6H5-[40-80/10]-P[2-4.9/0.01]-W[2-4.9/0.01]-R0
HW-PJ6H5-[40-80/10]-P[2-4.9/0.01]-W[2-4.9/0.01]-R[0.2-40/0.01]
HW-PJ6H5-LC[36-79.9/0.1]-P[2-4.9/0.01]-W[2-4.9/0.01]-R0
HW-PJ6H5-LC[36-79.9/0.1]-P[2-4.9/0.01]-W[2-4.9/0.01]-R[0.2-40/0.01]
HW-PJ6H6-[40-80/10]-P[2-5.9/0.01]-W[2-5.9/0.01]-R0
HW-PJ6H6-[40-80/10]-P[2-5.9/0.01]-W[2-5.9/0.01]-R[0.2-40/0.01]
HW-PJ6H6-LC[36-79.9/0.1]-P[2-5.9/0.01]-W[2-5.9/0.01]-R0
HW-PJ6H6-LC[36-79.9/0.1]-P[2-5.9/0.01]-W[2-5.9/0.01]-R[0.2-40/0.01]
HW-PJ6H8-[40-100/10]-P[3-7.9/0.01]-W[3-7.9/0.01]-R0
HW-PJ6H8-[40-100/10]-P[3-7.9/0.01]-W[3-7.9/0.01]-R[0.2-40/0.01]
HW-PJ6H8-LC[36-99.9/0.1]-P[3-7.9/0.01]-W[3-7.9/0.01]-R0
HW-PJ6H8-LC[36-99.9/0.1]-P[3-7.9/0.01]-W[3-7.9/0.01]-R[0.2-40/0.01]
HW-PJ6H10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-R0
HW-PJ6H10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-R[0.2-40/0.01]
HW-PJ6H10-LC[36-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-R0
HW-PJ6H10-LC[36-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-R[0.2-40/0.01]
HW-PJ6H13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R0
HW-PJ6H13-[40-100/10]-P[3-12.9/0.01]-W[3-12.9/0.01]-R[0.2-40/0.01]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Tip shape	Material	Surface treatment	Punch shank (mounting part) shape	D (Outer diameter) (mm)	A (mm)	B (mm)	C (mm)	L (L dimension) (mm)	LC (Full length alteration) (mm)	P (mm)	Q (mm)	R (mm)	S (mm)	W (mm)
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	5	-	-	-	40 ～ 80	-	2 ～ 4.9	-	0	-	2 ～ 4.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	5	-	-	-	40 ～ 80	-	2 ～ 4.9	-	0.2 ～ 40	-	2 ～ 4.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	5	-	-	-	-	37 ～ 79.9	2 ～ 4.9	-	0	-	2 ～ 4.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	5	-	-	-	-	37 ～ 79.9	2 ～ 4.9	-	0.2 ～ 40	-	2 ～ 4.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	6	-	-	-	40 ～ 80	-	2 ～ 5.9	-	0	-	2 ～ 5.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	6	-	-	-	40 ～ 80	-	2 ～ 5.9	-	0.2 ～ 40	-	2 ～ 5.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	6	-	-	-	-	37 ～ 79.9	2 ～ 5.9	-	0	-	2 ～ 5.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	6	-	-	-	-	37 ～ 79.9	2 ～ 5.9	-	0.2 ～ 40	-	2 ～ 5.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	8	-	-	-	40 ～ 100	-	3 ～ 7.9	-	0	-	3 ～ 7.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	8	-	-	-	40 ～ 100	-	3 ～ 7.9	-	0.2 ～ 40	-	3 ～ 7.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	8	-	-	-	-	37 ～ 99.9	3 ～ 7.9	-	0	-	3 ～ 7.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	8	-	-	-	-	37 ～ 99.9	3 ～ 7.9	-	0.2 ～ 40	-	3 ～ 7.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	10	-	-	-	40 ～ 100	-	3 ～ 9.9	-	0	-	3 ～ 9.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	10	-	-	-	40 ～ 100	-	3 ～ 9.9	-	0.2 ～ 40	-	3 ～ 9.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	10	-	-	-	-	37 ～ 99.9	3 ～ 9.9	-	0	-	3 ～ 9.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	10	-	-	-	-	37 ～ 99.9	3 ～ 9.9	-	0.2 ～ 40	-	3 ～ 9.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	13	-	-	-	40 ～ 100	-	3 ～ 12.9	-	0	-	3 ～ 12.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	13	-	-	-	40 ～ 100	-	3 ～ 12.9	-	0.2 ～ 40	-	3 ～ 12.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	13	-	-	-	-	37 ～ 99.9	3 ～ 12.9	-	0	-	3 ～ 12.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	13	-	-	-	-	37 ～ 99.9	3 ～ 12.9	-	0.2 ～ 40	-	3 ～ 12.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	16	-	-	-	40 ～ 100	-	6 ～ 15.9	-	0	-	6 ～ 15.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	16	-	-	-	40 ～ 100	-	6 ～ 15.9	-	0.2 ～ 40	-	6 ～ 15.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	16	-	-	-	-	37 ～ 99.9	6 ～ 15.9	-	0	-	6 ～ 15.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	16	-	-	-	-	37 ～ 99.9	6 ～ 15.9	-	0.2 ～ 40	-	6 ～ 15.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	20	-	-	-	40 ～ 100	-	6 ～ 19.9	-	0	-	6 ～ 19.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	20	-	-	-	40 ～ 100	-	6 ～ 19.9	-	0.2 ～ 40	-	6 ～ 19.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	20	-	-	-	-	37 ～ 99.9	6 ～ 19.9	-	0	-	6 ～ 19.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	20	-	-	-	-	37 ～ 99.9	6 ～ 19.9	-	0.2 ～ 40	-	6 ～ 19.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	25	-	-	-	40 ～ 100	-	6 ～ 24.9	-	0	-	6 ～ 24.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	25	-	-	-	40 ～ 100	-	6 ～ 24.9	-	0.2 ～ 40	-	6 ～ 24.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	25	-	-	-	-	37 ～ 99.9	6 ～ 24.9	-	0	-	6 ～ 24.9
-	1	Quote	10	6H	Powdered high-speed steel	TiCN	Standard	25	-	-	-	-	37 ～ 99.9	6 ～ 24.9	-	0.2 ～ 40	-	6 ～ 24.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	10	-	-	-	60 ～ 100	-	3 ～ 9.9	-	0.2 ～ 40	-	3 ～ 9.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	10	-	-	-	-	50 ～ 100	3 ～ 9.9	-	0.2 ～ 40	-	3 ～ 9.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	13	-	-	-	60 ～ 100	-	6 ～ 12.9	-	0.2 ～ 40	-	6 ～ 12.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	13	-	-	-	-	50 ～ 100	6 ～ 12.9	-	0.2 ～ 40	-	6 ～ 12.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	16	-	-	-	60 ～ 100	-	6 ～ 15.9	-	0.2 ～ 40	-	6 ～ 15.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	16	-	-	-	-	50 ～ 100	6 ～ 15.9	-	0.2 ～ 40	-	6 ～ 15.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	20	-	-	-	60 ～ 100	-	6 ～ 19.9	-	0.2 ～ 40	-	6 ～ 19.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	20	-	-	-	-	50 ～ 100	6 ～ 19.9	-	0.2 ～ 40	-	6 ～ 19.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	25	-	-	-	60 ～ 100	-	6 ～ 24.9	-	0.2 ～ 40	-	6 ～ 24.9
-	1	Quote	10	6H	SKD11 Equivalent	TiCN	With locating dowel hole	25	-	-	-	-	50 ～ 100	6 ～ 24.9	-	0.2 ～ 40	-	6 ～ 24.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	5	-	-	-	40 ～ 80	-	2 ～ 4.9	-	0	-	2 ～ 4.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	5	-	-	-	40 ～ 80	-	2 ～ 4.9	-	0.2 ～ 40	-	2 ～ 4.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	5	-	-	-	-	36 ～ 79.9	2 ～ 4.9	-	0	-	2 ～ 4.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	5	-	-	-	-	36 ～ 79.9	2 ～ 4.9	-	0.2 ～ 40	-	2 ～ 4.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	6	-	-	-	40 ～ 80	-	2 ～ 5.9	-	0	-	2 ～ 5.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	6	-	-	-	40 ～ 80	-	2 ～ 5.9	-	0.2 ～ 40	-	2 ～ 5.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	6	-	-	-	-	36 ～ 79.9	2 ～ 5.9	-	0	-	2 ～ 5.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	6	-	-	-	-	36 ～ 79.9	2 ～ 5.9	-	0.2 ～ 40	-	2 ～ 5.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	8	-	-	-	40 ～ 100	-	3 ～ 7.9	-	0	-	3 ～ 7.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	8	-	-	-	40 ～ 100	-	3 ～ 7.9	-	0.2 ～ 40	-	3 ～ 7.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	8	-	-	-	-	36 ～ 99.9	3 ～ 7.9	-	0	-	3 ～ 7.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	8	-	-	-	-	36 ～ 99.9	3 ～ 7.9	-	0.2 ～ 40	-	3 ～ 7.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	10	-	-	-	40 ～ 100	-	3 ～ 9.9	-	0	-	3 ～ 9.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	10	-	-	-	40 ～ 100	-	3 ～ 9.9	-	0.2 ～ 40	-	3 ～ 9.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	10	-	-	-	-	36 ～ 99.9	3 ～ 9.9	-	0	-	3 ～ 9.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	10	-	-	-	-	36 ～ 99.9	3 ～ 9.9	-	0.2 ～ 40	-	3 ～ 9.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	13	-	-	-	40 ～ 100	-	3 ～ 12.9	-	0	-	3 ～ 12.9
-	1	Quote	10	6H	Powdered high-speed steel	HW coating	Standard	13	-	-	-	40 ～ 100	-	3 ～ 12.9	-	0.2 ～ 40	-	3 ～ 12.9

Products homepage

Basic information

Type	Jector punch

Configure

148Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- SKD11 Equivalent
- SKH51 Equivalent
- Powdered high-speed steel
Clear
Surface treatment
- TiCN
- HW coating
- WPC
Clear
Punch shank (mounting part) shape
- Standard
- With locating dowel hole
Clear
D (Outer diameter)(mm)
5

6

8

10

13

16

20

25

32

38

45
Clear
A(mm)
Clear
B(mm)
Clear
C(mm)
0
Clear
L (L dimension)(mm)
40

50

60

70

80

90

100
[40-120/10mm Unit(s)]
Clear
LC (Full length alteration)(mm)
LC
[36-119.9/0.1mm Unit(s)]
Clear
P(mm)
[2-44.9/0.01mm Unit(s)]
Clear
Q(mm)
0
Clear
R(mm)
0
[0.2-40/0.01mm Unit(s)]
Clear
S(mm)
0
Clear
W(mm)
[2-44.9/0.01mm Unit(s)]
Clear
Type
- H-PJ(2-12)H
- H-PJ(2-18)J
- H-PJ(2-7)L
- H-PJ(3-29)K
- H-SJ-C(2-12)H
- H-SJ-C(2-18)J
- H-SJ-C(2-8)L
- H-SJ-C(3-29)K
- HW-PJ-H
- HW-PJ-J
- HW-PJ-K
- HW-PJ-L
- HW-SJ-C(2-12)H
- HW-SJ-C(2-18)J
- HW-SJ-C(2-8)L
- HW-SJ-C(3-29)K
- W-PJ-H
- W-PJ-J
- W-PJ-K
- W-PJ-L
- W-SJ-C-H
- W-SJ-C-J
- W-SJ-C-K
- W-SJ-C-L
- W-SJ-H
- W-SJ-J
- W-SJ-K
- W-SJ-L
Clear
Tip shape
2H

2J

2L

3J

3K

3L

4H

4J

4K

4L

5H

5J

5L

6H

6K

7H

7L

8H

8J

8K

8L

9H

9J

9K

10H

11H

11J

12H

12J

13K

14J

14K

15J

15K

16J

17J

17K

18J

20K

21K

22K

23K

25K

27K

28K

29K
Clear
Filter by CAD data type
- 2D
- 3D
Clear