Ejector pins / cylindrical head / EN 1.3343 Equiv. / shaft diameter, length Configurable

Click on this image to zoom in.

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
EPHB0.5-[40-100/0.01]-P[0.4-0.49/0.01]
EPHB0.6-[40-100/0.01]-P[0.5-0.59/0.01]
EPHB0.7-[40-100/0.01]-P[0.6-0.69/0.01]
EPHB0.8-[40-150/0.01]-P[0.7-0.79/0.01]
EPHB0.9-[40-150/0.01]-P[0.8-0.89/0.01]
EPHB1-[40-200/0.01]-P[0.9-0.99/0.01]
EPHB1.5-[40-200/0.01]-P[1-1.49/0.01]
EPHB2-[40-250/0.01]-P[1.5-1.99/0.01]
EPHB2.5-[40-300/0.01]-P[2-2.49/0.01]
EPHB3-[40-300/0.01]-P[2.5-2.99/0.01]
EPHB3.5-[40-300/0.01]-P[3-3.49/0.01]
EPHB4-[40-300/0.01]-P[3.5-3.99/0.01]
EPHB4.5-[40-350/0.01]-P[4-4.49/0.01]
EPHB5-[40-350/0.01]-P[4.5-4.99/0.01]
EPHB5.5-[40-350/0.01]-P[5-5.49/0.01]
EPHB6-[40-350/0.01]-P[5.5-5.99/0.01]
EPHB6.5-[40-350/0.01]-P[6-6.49/0.01]
EPHB7-[40-350/0.01]-P[6.5-6.99/0.01]
EPHB8-[40-350/0.01]-P[7-7.99/0.01]
EPHB10-[40-350/0.01]-P[8-9.99/0.01]
EPHB12-[40-350/0.01]-P[10-11.99/0.01]
EPHBE0.5-[40-100/0.01]-P[0.4-0.49/0.01]
EPHBE0.6-[40-100/0.01]-P[0.5-0.59/0.01]
EPHBE0.7-[40-100/0.01]-P[0.6-0.69/0.01]
EPHBE0.8-[40-150/0.01]-P[0.7-0.79/0.01]
EPHBE0.9-[40-150/0.01]-P[0.8-0.89/0.01]
EPHBE1-[40-200/0.01]-P[0.9-0.99/0.01]
EPHBE1.5-[40-200/0.01]-P[1-1.49/0.01]
EPHBE2-[40-250/0.01]-P[1.5-1.99/0.01]
EPHBE2.5-[40-300/0.01]-P[2-2.49/0.01]
EPHBE3-[40-300/0.01]-P[2.5-2.99/0.01]
EPHBE3.5-[40-300/0.01]-P[3-3.49/0.01]
EPHBE4-[40-300/0.01]-P[3.5-3.99/0.01]
EPHBE4.5-[40-350/0.01]-P[4-4.49/0.01]
EPHBE5-[40-350/0.01]-P[4.5-4.99/0.01]
EPHBE5.5-[40-350/0.01]-P[5-5.49/0.01]
EPHBE6-[40-350/0.01]-P[5.5-5.99/0.01]
EPHBE6.5-[40-350/0.01]-P[6-6.49/0.01]
EPHBE7-[40-350/0.01]-P[6.5-6.99/0.01]
EPHBE8-[40-350/0.01]-P[7-7.99/0.01]
EPHBE10-[40-350/0.01]-P[8-9.99/0.01]
EPHBE12-[40-350/0.01]-P[10-11.99/0.01]
EPHJB4-[40-300/0.01]-P[3.5-3.99/0.01]
EPHJB4.5-[40-350/0.01]-P[4-4.49/0.01]
EPHJB5-[40-350/0.01]-P[4.5-4.99/0.01]
EPHJB5.5-[40-350/0.01]-P[5-5.49/0.01]
EPHJB6-[40-350/0.01]-P[5.5-5.99/0.01]
EPHJB6.5-[40-350/0.01]-P[6-6.49/0.01]
EPHJB7-[40-350/0.01]-P[6.5-6.99/0.01]
EPHJB8-[40-350/0.01]-P[7-7.99/0.01]
EPHJB10-[40-350/0.01]-P[8-9.99/0.01]
EPHJB12-[40-350/0.01]-P[10-11.99/0.01]
EPHJBE4-[40-300/0.01]-P[3.5-3.99/0.01]
EPHJBE4.5-[40-350/0.01]-P[4-4.49/0.01]
EPHJBE5-[40-350/0.01]-P[4.5-4.99/0.01]
EPHJBE5.5-[40-350/0.01]-P[5-5.49/0.01]
EPHJBE6-[40-350/0.01]-P[5.5-5.99/0.01]
EPHJBE6.5-[40-350/0.01]-P[6-6.49/0.01]
EPHJBE7-[40-350/0.01]-P[6.5-6.99/0.01]
EPHJBE8-[40-350/0.01]-P[7-7.99/0.01]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shaft diameter tolerance (Reference tolerance)	L dimension tolerance (Reference tolerance)	Head thickness	D/P (Shaft diameter) (mm)	No. (Nominal diameter) (mm)	L (L dimension) (mm)	Type
-	1	7 Days	10	0/-0.005	+0.02/0	4mm(T4)	0.4 ～ 0.49	0.5	40 ～ 100	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0	4mm(T4)	0.5 ～ 0.59	0.6	40 ～ 100	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0	4mm(T4)	0.6 ～ 0.69	0.7	40 ～ 100	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0	4mm(T4)	0.7 ～ 0.79	0.8	40 ～ 150	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0	4mm(T4)	0.8 ～ 0.89	0.9	40 ～ 150	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0	4mm(T4)	0.9 ～ 0.99	1	40 ～ 200	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0	4mm(T4)	1 ～ 1.49	1.5	40 ～ 200	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	1.5 ～ 1.99	2	40 ～ 250	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2 ～ 2.49	2.5	40 ～ 300	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2.5 ～ 2.99	3	40 ～ 300	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3 ～ 3.49	3.5	40 ～ 300	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3.5 ～ 3.99	4	40 ～ 300	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4 ～ 4.49	4.5	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4.5 ～ 4.99	5	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5 ～ 5.49	5.5	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5.5 ～ 5.99	6	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6 ～ 6.49	6.5	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6.5 ～ 6.99	7	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	7 ～ 7.99	8	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	8 ～ 9.99	10	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	10 ～ 11.99	12	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0	4mm(T4)	0.4 ～ 0.49	0.5	40 ～ 100	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0	4mm(T4)	0.5 ～ 0.59	0.6	40 ～ 100	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0	4mm(T4)	0.6 ～ 0.69	0.7	40 ～ 100	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0	4mm(T4)	0.7 ～ 0.79	0.8	40 ～ 150	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0	4mm(T4)	0.8 ～ 0.89	0.9	40 ～ 150	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0	4mm(T4)	0.9 ～ 0.99	1	40 ～ 200	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0	4mm(T4)	1 ～ 1.49	1.5	40 ～ 200	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	1.5 ～ 1.99	2	40 ～ 250	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	2 ～ 2.49	2.5	40 ～ 300	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	2.5 ～ 2.99	3	40 ～ 300	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	3 ～ 3.49	3.5	40 ～ 300	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	3.5 ～ 3.99	4	40 ～ 300	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	4 ～ 4.49	4.5	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	4.5 ～ 4.99	5	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	5 ～ 5.49	5.5	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	5.5 ～ 5.99	6	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	6 ～ 6.49	6.5	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	6.5 ～ 6.99	7	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	7 ～ 7.99	8	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	8 ～ 9.99	10	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	10 ～ 11.99	12	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	3.5 ～ 3.99	4	40 ～ 300	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	4 ～ 4.49	4.5	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	4.5 ～ 4.99	5	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	5 ～ 5.49	5.5	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	5.5 ～ 5.99	6	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	6 ～ 6.49	6.5	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	6.5 ～ 6.99	7	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	8mm(JIS)	7 ～ 7.99	8	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	8mm(JIS)	8 ～ 9.99	10	40 ～ 350	Standard type
-	1	7 Days	10	0/-0.005	+0.02/0 or +0.05/0	8mm(JIS)	10 ～ 11.99	12	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	6mm(JIS)	3.5 ～ 3.99	4	40 ～ 300	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	6mm(JIS)	4 ～ 4.49	4.5	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	6mm(JIS)	4.5 ～ 4.99	5	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	6mm(JIS)	5 ～ 5.49	5.5	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	6mm(JIS)	5.5 ～ 5.99	6	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	6mm(JIS)	6 ～ 6.49	6.5	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	6mm(JIS)	6.5 ～ 6.99	7	40 ～ 350	Standard type
-	1	7 Days	10	-0.01/-0.02	+0.02/0 or +0.05/0	8mm(JIS)	7 ～ 7.99	8	40 ～ 350	Standard type

Products homepage

Basic information

Shape type	No tip processing	Material	EN 1.3343 Equiv.	Surface treatment	No
Tip shape	No	Gas release shape	No	Character engraving type	No
Number of engraving characters	No	Technical Standard	JIS

Configure

69Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shaft diameter tolerance (Reference tolerance)
- -0.01/-0.02
- 0/-0.005
Clear
L dimension tolerance (Reference tolerance)
- +0.02/0
- +0.02/0 or +0.05/0
Clear
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
Clear
D/P (Shaft diameter)(mm)
[0.4-11.99/0.01mm Unit(s)][0.3-0.995/0.005mm Unit(s)]
Clear
No. (Nominal diameter)(mm)
0.4

0.5

0.6

0.7

0.8

0.9

1

1.5

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

10

12
Clear
L (L dimension)(mm)
[20-350/0.01mm Unit(s)][20-60/0.001mm Unit(s)]
Clear
Type
- Small diameter type
- Standard type
Clear
Type
- EPHB
- EPHBE
- EPHJB
- EPHJBE
- EPYB
Clear
Filter by CAD data type
- 2D
- 3D
Clear