Ejector pins / cylindrical head / EN 1.3343 Equiv. / gas venting / dimensions Configurable (Part Numbers - CAD Download)

Click on this image to zoom in.

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
GWS-EPH-L1.5-[60-250/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L2-[60-300/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L2.5-[60-300/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L3-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L3.5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L4-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L4.5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L5.5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L6-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L6.5-[40-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L7-[40-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L8-[40-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L10-[40-350/0.01]-E[0.03-0.05/0.01]
GWS-EPH-L12-[40-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHB2-[60-250/0.01]-P[1.5-1.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHB2.5-[60-300/0.01]-P[2-2.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHB3-[60-300/0.01]-P[2.5-2.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHB3.5-[60-300/0.01]-P[3-3.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHB4-[60-300/0.01]-P[3.5-3.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHB4.5-[60-350/0.01]-P[4-4.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHB5-[60-350/0.01]-P[4.5-4.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHB5.5-[60-350/0.01]-P[5-5.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHB6-[60-350/0.01]-P[5.5-5.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHB6.5-[40-350/0.01]-P[6-6.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHB7-[40-350/0.01]-P[6.5-6.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHB8-[40-350/0.01]-P[7-7.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHB10-[40-350/0.01]-P[8-9.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHB12-[40-350/0.01]-P[10-11.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L4-[60-300/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L4.5-[60-300/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L5.5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L6-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L6.5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L7-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L8-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L10-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L12-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB4-[60-350/0.01]-P[3.5-3.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB4.5-[60-350/0.01]-P[4-4.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB5-[60-350/0.01]-P[4.5-4.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB5.5-[60-350/0.01]-P[5-5.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB6-[60-350/0.01]-P[5.5-5.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB6.5-[60-350/0.01]-P[6-6.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB7-[60-350/0.01]-P[6.5-6.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB8-[60-350/0.01]-P[7-7.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB10-[60-350/0.01]-P[8-9.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB12-[60-350/0.01]-P[10-11.99/0.01]-E[0.03-0.05/0.01]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shaft diameter tolerance (Reference tolerance)	L dimension tolerance (Reference tolerance)	Head thickness	D/P (Shaft diameter) (mm)	Gas release shape	No. (Nominal diameter) (mm)	L (L dimension) (mm)	E (mm)
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	1.5	Four flats cutting	-	60 ～ 250	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2	Four flats cutting	-	60 ～ 300	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2.5	Four flats cutting	-	60 ～ 300	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3.5	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4.5	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5.5	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6.5	Four flats cutting	-	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	7	Four flats cutting	-	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	8	Four flats cutting	-	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	10	Four flats cutting	-	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	12	Four flats cutting	-	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	1.5 ～ 1.99	Four flats cutting	2	60 ～ 250	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2 ～ 2.49	Four flats cutting	2.5	60 ～ 300	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2.5 ～ 2.99	Four flats cutting	3	60 ～ 300	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3 ～ 3.49	Four flats cutting	3.5	60 ～ 300	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3.5 ～ 3.99	Four flats cutting	4	60 ～ 300	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4 ～ 4.49	Four flats cutting	4.5	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4.5 ～ 4.99	Four flats cutting	5	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5 ～ 5.49	Four flats cutting	5.5	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5.5 ～ 5.99	Four flats cutting	6	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6 ～ 6.49	Four flats cutting	6.5	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6.5 ～ 6.99	Four flats cutting	7	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	7 ～ 7.99	Four flats cutting	8	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	8 ～ 9.99	Four flats cutting	10	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	10 ～ 11.99	Four flats cutting	12	40 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	4	Four flats cutting	-	60 ～ 300	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	4.5	Four flats cutting	-	60 ～ 300	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	5	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	5.5	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	6	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	6.5	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	7	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	8mm(JIS)	8	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	8mm(JIS)	10	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	8mm(JIS)	12	Four flats cutting	-	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	3.5 ～ 3.99	Four flats cutting	4	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	4 ～ 4.49	Four flats cutting	4.5	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	4.5 ～ 4.99	Four flats cutting	5	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	5 ～ 5.49	Four flats cutting	5.5	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	5.5 ～ 5.99	Four flats cutting	6	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	6 ～ 6.49	Four flats cutting	6.5	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	6mm(JIS)	6.5 ～ 6.99	Four flats cutting	7	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	8mm(JIS)	7 ～ 7.99	Four flats cutting	8	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	8mm(JIS)	8 ～ 9.99	Four flats cutting	10	60 ～ 350	0.03 ～ 0.05
-	1	Quote	10	0/-0.005	+0.02/0 or +0.05/0	8mm(JIS)	10 ～ 11.99	Four flats cutting	12	60 ～ 350	0.03 ～ 0.05

Products homepage

Basic information

Shape type	Gas release	Material	EN 1.3343 Equiv.	Surface treatment	No
Tip shape	No	Character engraving type	No	Number of engraving characters	No

Configure

109Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

L dimension tolerance (Reference tolerance)
- +0.02/0
- +0.02/0 or +0.05/0
Clear
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
Clear
D/P (Shaft diameter)(mm)
0.6

0.7

0.8

0.9

1

1.2

1.5

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

10

12
[0.6-11.99/0.01mm Unit(s)]
Clear
Gas release shape
- Single flat cutting
- Four flats cutting
Clear
No. (Nominal diameter)(mm)
0.7

0.8

0.9

1

1.5

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

10

12
Clear
L (L dimension)(mm)
[40-350/0.01mm Unit(s)]
Clear
E(mm)
[0.02-0.05/0.01mm Unit(s)]
Clear
Type
- GW-EPH-L
- GW-EPHB
- GW-EPHBE
- GW-EPHE-L
- GW-EPHJ-L
- GW-EPHJB
- GW-EPHJBE
- GW-EPHJE-L
- GWS-EPH-L
- GWS-EPHB
- GWS-EPHBE
- GWS-EPHE-L
- GWS-EPHJ-L
- GWS-EPHJB
- GWS-EPHJBE
- GWS-EPHJE-L
Clear
Shaft diameter tolerance (Reference tolerance)
- -0.01/-0.02
- 0/-0.005
Clear
Filter by CAD data type
- 2D
- 3D
Clear