Contour core pins / cylindrical / HSS, tool steel / D,L 0,01mm / conical face shape selectable / conical tip
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | No. (Nominal diameter) (mm) | RE (R shape alteration・enlargement) (mm) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | CVC (Designation of C dimension in increments of 0.01mm) (mm) | F (Bearing bore length) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | Q (Tip R chamfering) (mm) | R (Step type R) (mm) | S (Tip tapered width) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration, smaller than V min) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 0.8 ～ 0.99 | 1A | No processing | 1 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 0.8 ～ 0.99 | 1A | No processing | 1 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 1 ～ 1.49 | 1A | No processing | 1.5 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 1 ～ 1.49 | 1A | No processing | 1.5 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 1.5 ～ 1.99 | 1A | No processing | 2 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 2 ～ 2.49 | 1A | No processing | 2.5 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 2.5 ～ 2.99 | 1A | No processing | 3 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.7 ～ 2.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 3 ～ 3.49 | 1A | No processing | 3.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 3.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 3 ～ 3.49 | 1A | No processing | 3.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 ～ 3.99 | 1A | No processing | 4 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 3.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 ～ 3.99 | 1A | No processing | 4 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 4 ～ 4.49 | 1A | No processing | 4.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 4.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 4.5 ～ 4.99 | 1A | No processing | 5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 4.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 5 ～ 5.49 | 1A | No processing | 5.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1.5 ～ 5.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 5 ～ 5.49 | 1A | No processing | 5.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1 ～ 1.49 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 ～ 5.99 | 1A | No processing | 6 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 5.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 ～ 5.99 | 1A | No processing | 6 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 6 ～ 6.49 | 1A | No processing | 6.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 6.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 6 ～ 6.49 | 1A | No processing | 6.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 6.5 ～ 6.99 | 1A | No processing | 7 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 6.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 6.5 ～ 6.99 | 1A | No processing | 7 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 7 ～ 7.99 | 1A | No processing | 8 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 7.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 7 ～ 7.99 | 1A | No processing | 8 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 8 ～ 9.99 | 1A | No processing | 10 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 9.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 8 ～ 9.99 | 1A | No processing | 10 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 10 ～ 12.99 | 1A | No processing | 13 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 12.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 13 ～ 15.99 | 1A | No processing | 16 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 15.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 0.8 ～ 0.99 | 1A | B | 1 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 0.8 ～ 0.99 | 1A | B | 1 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 1 ～ 1.49 | 1A | B | 1.5 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 1 ～ 1.49 | 1A | B | 1.5 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 1.5 ～ 1.99 | 1A | B | 2 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 2 ～ 2.49 | 1A | B | 2.5 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 2.5 ～ 2.99 | 1A | B | 3 | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.7 ～ 2.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 3 ～ 3.49 | 1A | B | 3.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 3.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 3 ～ 3.49 | 1A | B | 3.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 3.5 ～ 3.99 | 1A | B | 4 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 3.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 3.5 ～ 3.99 | 1A | B | 4 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 4 ～ 4.49 | 1A | B | 4.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 4.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 4.5 ～ 4.99 | 1A | B | 5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 4.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 5 ～ 5.49 | 1A | B | 5.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1.5 ～ 5.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 5 ～ 5.49 | 1A | B | 5.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1 ～ 1.49 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 5.5 ～ 5.99 | 1A | B | 6 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 5.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 5.5 ～ 5.99 | 1A | B | 6 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 6 ～ 6.49 | 1A | B | 6.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 6.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 6 ～ 6.49 | 1A | B | 6.5 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 6.5 ～ 6.99 | 1A | B | 7 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 6.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 6.5 ～ 6.99 | 1A | B | 7 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 7 ～ 7.99 | 1A | B | 8 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 7.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 7 ～ 7.99 | 1A | B | 8 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 8 ～ 9.99 | 1A | B | 10 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 9.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 8 ～ 9.99 | 1A | B | 10 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 10 ～ 12.99 | 1A | B | 13 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 12.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | 0/-0.1 | ±0.01 | 13 ～ 15.99 | 1A | B | 16 | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 15.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | - | - | 10 ～ 99.5 | 0.3 ～ 0.4 | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | - | - | 10 ～ 99.5 | 0.3 ～ 0.4 | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 1 ～ 1.49 | 1A | C | 1.5 | - | - | - | - | 10 ～ 99.5 | 0.5 ～ 0.7 | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.48 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 1 ～ 1.49 | 1A | C | 1.5 | - | - | - | - | 10 ～ 99.5 | 0.5 ～ 0.7 | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 1.5 ～ 1.99 | 1A | C | 2 | - | - | - | - | 10 ～ 99.5 | 0.5 ～ 0.9 | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.98 | - | ||
- | 1 | Quote | 10 | NAK80 | 0/-0.005 | +0.02/0 | ±0.01 | 2 ～ 2.49 | 1A | C | 2.5 | - | - | - | - | 10 ～ 99.5 | 0.5 ～ 1.2 | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.48 | - |
Loading...
Basic information
| Shape type | One-step | Surface treatment | No | Head thickness | 4mm(T4) |
|---|---|---|---|---|---|
| Step (Step shape of the second step) | No second step |
Configure
Basic Attributes
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
L dimension tolerance
- +0.02/0
- 0/-0.1
-
Tip gradient tolerance
- ±0.01
- ±0.015
-
D/P (Shaft diameter)(mm)
-
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
- 1E
-
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
-
No. (Nominal diameter)(mm)
-
RE (R shape alteration・enlargement)(mm)
-
A (Step shape diameter)(mm)
-
C (Step type taper width)(mm)
-
CVC (Designation of C dimension in increments of 0.01mm)(mm)
-
F (Bearing bore length)(mm)
-
G (Tip C chamfering width)(mm)
-
K (Tip angle)(°)
-
L (L dimension)(mm)
-
Q (Tip R chamfering)(mm)
-
R (Step type R)(mm)
-
S (Tip tapered width)(mm)
-
V (Tip diameter)(mm)
-
VC (V dimension alteration, smaller than V min)(mm)
-
Type
- CPAB-1A
- CPAB-1AB
- CPAB-1AC
- CPAB-1AG
- CPAB-1AR
- CPAB-1AT
- CPAB-1B
- CPAB-1BB
- CPAB-1BC
- CPAB-1BG
- CPAB-1BR
- CPAB-1BT
- CPAB-1C
- CPAB-1CB
- CPAB-1CC
- CPAB-1CG
- CPAB-1CR
- CPAB-1CT
- CPAB-1D
- CPAB-1DB
- CPAB-1DC
- CPAB-1DG
- CPAB-1DR
- CPAB-1DT
- CPAB-1E
- CPAB-1EB
- CPAB-1EC
- CPAB-1EG
- CPAB-1ER
- CPAB-1ET
- CPDB-1A
- CPDB-1AB
- CPDB-1AC
- CPDB-1AG
- CPDB-1AR
- CPDB-1AT
- CPDB-1B
- CPDB-1BB
- CPDB-1BC
- CPDB-1BG
- CPDB-1BR
- CPDB-1BT
- CPDB-1C
- CPDB-1CB
- CPDB-1CC
- CPDB-1CG
- CPDB-1CR
- CPDB-1CT
- CPDB-1D
- CPDB-1DB
- CPDB-1DC
- CPDB-1DG
- CPDB-1DR
- CPDB-1DT
- CPDB-1E
- CPDB-1EB
- CPDB-1EC
- CPDB-1EG
- CPDB-1ER
- CPDB-1ET
- CPEHB-1A
- CPEHB-1AB
- CPEHB-1AC
- CPEHB-1AG
- CPEHB-1AR
- CPEHB-1AT
- CPEHB-1B
- CPEHB-1BB
- CPEHB-1BC
- CPEHB-1BG
- CPEHB-1BR
- CPEHB-1BT
- CPEHB-1C
- CPEHB-1CB
- CPEHB-1CC
- CPEHB-1CG
- CPEHB-1CR
- CPEHB-1CT
- CPEHB-1D
- CPEHB-1DB
- CPEHB-1DC
- CPEHB-1DG
- CPEHB-1DR
- CPEHB-1DT
- CPEHB-1E
- CPEHB-1EB
- CPEHB-1EC
- CPEHB-1EG
- CPEHB-1ER
- CPEHB-1ET
- CPFB-1A
- CPFB-1AB
- CPFB-1AC
- CPFB-1AG
- CPFB-1AR
- CPFB-1AT
- CPFB-1B
- CPFB-1BB
- CPFB-1BC
- CPFB-1BG
- CPFB-1BR
- CPFB-1BT
- CPFB-1C
- CPFB-1CB
- CPFB-1CC
- CPFB-1CG
- CPFB-1CR
- CPFB-1CT
- CPFB-1D
- CPFB-1DB
- CPFB-1DC
- CPFB-1DG
- CPFB-1DR
- CPFB-1DT
- CPFB-1E
- CPFB-1EB
- CPFB-1EC
- CPFB-1EG
- CPFB-1ER
- CPFB-1ET
- CPGB-1A
- CPGB-1AB
- CPGB-1AC
- CPGB-1AG
- CPGB-1AR
- CPGB-1AT
- CPGB-1B
- CPGB-1BB
- CPGB-1BC
- CPGB-1BG
- CPGB-1BR
- CPGB-1BT
- CPGB-1C
- CPGB-1CB
- CPGB-1CC
- CPGB-1CG
- CPGB-1CR
- CPGB-1CT
- CPGB-1D
- CPGB-1DB
- CPGB-1DC
- CPGB-1DG
- CPGB-1DR
- CPGB-1DT
- CPGB-1E
- CPGB-1EB
- CPGB-1EC
- CPGB-1EG
- CPGB-1ER
- CPGB-1ET
- CPHB-1A
- CPHB-1AB
- CPHB-1AC
- CPHB-1AG
- CPHB-1AR
- CPHB-1AT
- CPHB-1B
- CPHB-1BB
- CPHB-1BC
- CPHB-1BG
- CPHB-1BR
- CPHB-1BT
- CPHB-1C
- CPHB-1CB
- CPHB-1CC
- CPHB-1CG
- CPHB-1CR
- CPHB-1CT
- CPHB-1D
- CPHB-1DB
- CPHB-1DC
- CPHB-1DG
- CPHB-1DR
- CPHB-1DT
- CPHB-1E
- CPHB-1EB
- CPHB-1EC
- CPHB-1EG
- CPHB-1ER
- CPHB-1ET
- CPKB-1A
- CPKB-1AB
- CPKB-1AC
- CPKB-1AG
- CPKB-1AR
- CPKB-1AT
- CPKB-1B
- CPKB-1BB
- CPKB-1BC
- CPKB-1BG
- CPKB-1BR
- CPKB-1BT
- CPKB-1C
- CPKB-1CB
- CPKB-1CC
- CPKB-1CG
- CPKB-1CR
- CPKB-1CT
- CPKB-1D
- CPKB-1DB
- CPKB-1DC
- CPKB-1DG
- CPKB-1DR
- CPKB-1DT
- CPKB-1E
- CPKB-1EB
- CPKB-1EC
- CPKB-1EG
- CPKB-1ER
- CPKB-1ET
- CPNB-1A
- CPNB-1AB
- CPNB-1AC
- CPNB-1AG
- CPNB-1AR
- CPNB-1AT
- CPNB-1B
- CPNB-1BB
- CPNB-1BC
- CPNB-1BG
- CPNB-1BR
- CPNB-1BT
- CPNB-1C
- CPNB-1CB
- CPNB-1CC
- CPNB-1CG
- CPNB-1CR
- CPNB-1CT
- CPNB-1D
- CPNB-1DB
- CPNB-1DC
- CPNB-1DG
- CPNB-1DR
- CPNB-1DT
- CPNB-1E
- CPNB-1EB
- CPNB-1EC
- CPNB-1EG
- CPNB-1ER
- CPNB-1ET
- CPPB-1A
- CPPB-1AB
- CPPB-1AC
- CPPB-1AG
- CPPB-1AR
- CPPB-1AT
- CPPB-1B
- CPPB-1BB
- CPPB-1BC
- CPPB-1BG
- CPPB-1BR
- CPPB-1BT
- CPPB-1C
- CPPB-1CB
- CPPB-1CC
- CPPB-1CG
- CPPB-1CR
- CPPB-1CT
- CPPB-1D
- CPPB-1DB
- CPPB-1DC
- CPPB-1DG
- CPPB-1DR
- CPPB-1DT
- CPPB-1E
- CPPB-1EB
- CPPB-1EC
- CPPB-1EG
- CPPB-1ER
- CPPB-1ET
- CPQHB-1A
- CPQHB-1AB
- CPQHB-1AC
- CPQHB-1AG
- CPQHB-1AR
- CPQHB-1AT
- CPQHB-1B
- CPQHB-1BB
- CPQHB-1BC
- CPQHB-1BG
- CPQHB-1BR
- CPQHB-1BT
- CPQHB-1C
- CPQHB-1CB
- CPQHB-1CC
- CPQHB-1CG
- CPQHB-1CR
- CPQHB-1CT
- CPQHB-1D
- CPQHB-1DB
- CPQHB-1DC
- CPQHB-1DG
- CPQHB-1DR
- CPQHB-1DT
- CPQHB-1E
- CPQHB-1EB
- CPQHB-1EC
- CPQHB-1EG
- CPQHB-1ER
- CPQHB-1ET
- CPRHB-1A
- CPRHB-1AB
- CPRHB-1AC
- CPRHB-1AG
- CPRHB-1AR
- CPRHB-1AT
- CPRHB-1B
- CPRHB-1BB
- CPRHB-1BC
- CPRHB-1BG
- CPRHB-1BR
- CPRHB-1BT
- CPRHB-1C
- CPRHB-1CB
- CPRHB-1CC
- CPRHB-1CG
- CPRHB-1CR
- CPRHB-1CT
- CPRHB-1D
- CPRHB-1DB
- CPRHB-1DC
- CPRHB-1DG
- CPRHB-1DR
- CPRHB-1DT
- CPRHB-1E
- CPRHB-1EB
- CPRHB-1EC
- CPRHB-1EG
- CPRHB-1ER
- CPRHB-1ET
- CPTHB-1A
- CPTHB-1AB
- CPTHB-1AC
- CPTHB-1AG
- CPTHB-1AR
- CPTHB-1AT
- CPTHB-1B
- CPTHB-1BB
- CPTHB-1BC
- CPTHB-1BG
- CPTHB-1BR
- CPTHB-1BT
- CPTHB-1C
- CPTHB-1CB
- CPTHB-1CC
- CPTHB-1CG
- CPTHB-1CR
- CPTHB-1CT
- CPTHB-1D
- CPTHB-1DB
- CPTHB-1DC
- CPTHB-1DG
- CPTHB-1DR
- CPTHB-1DT
- CPTHB-1E
- CPTHB-1EB
- CPTHB-1EC
- CPTHB-1EG
- CPTHB-1ER
- CPTHB-1ET
- CPWB-1A
- CPWB-1AB
- CPWB-1AC
- CPWB-1AG
- CPWB-1AR
- CPWB-1AT
- CPWB-1B
- CPWB-1BB
- CPWB-1BC
- CPWB-1BG
- CPWB-1BR
- CPWB-1BT
- CPWB-1C
- CPWB-1CB
- CPWB-1CC
- CPWB-1CG
- CPWB-1CR
- CPWB-1CT
- CPWB-1D
- CPWB-1DB
- CPWB-1DC
- CPWB-1DG
- CPWB-1DR
- CPWB-1DT
- CPWB-1E
- CPWB-1EB
- CPWB-1EC
- CPWB-1EG
- CPWB-1ER
- CPWB-1ET
- CPXB-1A
- CPXB-1AB
- CPXB-1AC
- CPXB-1AG
- CPXB-1AR
- CPXB-1AT
- CPXB-1B
- CPXB-1BB
- CPXB-1BC
- CPXB-1BG
- CPXB-1BR
- CPXB-1BT
- CPXB-1C
- CPXB-1CB
- CPXB-1CC
- CPXB-1CG
- CPXB-1CR
- CPXB-1CT
- CPXB-1D
- CPXB-1DB
- CPXB-1DC
- CPXB-1DG
- CPXB-1DR
- CPXB-1DT
- CPXB-1E
- CPXB-1EB
- CPXB-1EC
- CPXB-1EG
- CPXB-1ER
- CPXB-1ET
- CPYB-1A
- CPYB-1AB
- CPYB-1AC
- CPYB-1AG
- CPYB-1AR
- CPYB-1AT
- CPYB-1B
- CPYB-1BB
- CPYB-1BC
- CPYB-1BG
- CPYB-1BR
- CPYB-1BT
- CPYB-1C
- CPYB-1CB
- CPYB-1CC
- CPYB-1CG
- CPYB-1CR
- CPYB-1CT
- CPYB-1D
- CPYB-1DB
- CPYB-1DC
- CPYB-1DG
- CPYB-1DR
- CPYB-1DT
- CPYB-1E
- CPYB-1EB
- CPYB-1EC
- CPYB-1EG
- CPYB-1ER
- CPYB-1ET
-
Material
- SKH51
- SKD61
- NAK80
- DH2F
- SUS440C
- MAS1C
- STAVAX ESR
- PROVA400
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.