ES

Type Code Seach | *NOT READY*: #CODE

Sugerencias de palabras clave

Sugerencias de números de pieza

S
S
S
S

Discontinued Products

Sprue bushes / head offset / material selectable / end form selectable / economical variant / flange thickness 10mm

Sprue bushes / head offset / material selectable / end form selectable / economical variant / flange thickness 10mm

Click on this image to zoom in.

Click on this image to zoom in.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Loading...

Plug-in is required for 3D Preview

Data to be displayed: 30; 45; 60

1

Part Number
SBSDE8-[0-80/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-3/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSDE10-[0-120/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSDE12-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSDE13-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSDE16-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSDE20-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSDE25-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSME8-[0-80/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-3/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSME10-[0-120/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSME12-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSME13-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSME16-[0-150/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSME20-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]
SBSME25-[0-200/0.1]-SR[10.5,11]-P[2,2.5,3]-A[0.5-4/0.5]-F[0.3,0.5,0.8,1,1.2,1.5,1.8,2]

Part Number	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Material	Tip matching shape	Nozzle touch part specification	D (Shaft diameter) (mm)	L (Bearing bore length) (mm)	A (Taper angle at sprue) (°)	F (Resin pocket depth) (mm)	G (Taper angle) (mm)	P (Sprue diameter) (mm)	SR (Nozzle part) (mm)	V (Tip diameter) (mm)
	1		Quote	10	SKD61	Straight	Resin pocket	8	0 ～ 80	0.5 ～ 3	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	SKD61	Straight	Resin pocket	10	0 ～ 120	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	SKD61	Straight	Resin pocket	12	0 ～ 150	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	SKD61	Straight	Resin pocket	13	0 ～ 150	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	SKD61	Straight	Resin pocket	16	0 ～ 150	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	SKD61	Straight	Resin pocket	20	0 ～ 200	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	SKD61	Straight	Resin pocket	25	0 ～ 200	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	HPM1 Equivalent	Straight	Resin pocket	8	0 ～ 80	0.5 ～ 3	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	HPM1 Equivalent	Straight	Resin pocket	10	0 ～ 120	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	HPM1 Equivalent	Straight	Resin pocket	12	0 ～ 150	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	HPM1 Equivalent	Straight	Resin pocket	13	0 ～ 150	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	HPM1 Equivalent	Straight	Resin pocket	16	0 ～ 150	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	HPM1 Equivalent	Straight	Resin pocket	20	0 ～ 200	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-
	1		Quote	10	HPM1 Equivalent	Straight	Resin pocket	25	0 ～ 200	0.5 ～ 4	0.3 ～ 2	-	2 ～ 3	10.5 ～ 11	-

Loading...

1

Products homepage

Basic information

Product type	Shoulder type	Head thickness(mm)	15

Configure

14Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- HPM1 Equivalent
- SKD61
Clear
Nozzle touch part specification
- Normal
- Resin pocket
Clear
D (Shaft diameter)(mm)
8

10

12

13

16

20

25
Clear
L (Bearing bore length)(mm)
[0-200/0.1mm Unit(s)]
Clear
A (Taper angle at sprue)(°)
[0.5-4/0.5° Unit(s)]
Clear
F (Resin pocket depth)(mm)
0.3

0.5

0.8

1

1.2

1.5

1.8

2
Clear
G (Taper angle)(mm)
Clear
P (Sprue diameter)(mm)
2

2.5

3
Clear
SR (Nozzle part)(mm)
10.5

11
Clear
V (Tip diameter)(mm)
Clear
Type
- SBSDE
- SBSME
- SBTDE
- SBTME
Clear
Tip matching shape
- Straight
- Tapered
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

: Technical Inquiry

Top of the page

Método de pago

Factura

Prepago

PayPal

Fabricación bajo demanda

Cambiar de vista

Móvil
PC

Certificados

MISUMI en todo el mundo

País/Región/Idioma

Redes sociales

Nota Legal

Copyright © MISUMI Corporation All Rights Reserved.