Linear Bushings with Pillow Blocks - Double Bushing with Dowel Holes (LHBBLN40G)

Click on this image to zoom in.

Promotional pricing
Volume Discount

MISUMI

Product Details:

Manufacturer part number: LHBBLN40G

Brand: MISUMI

Price: 211.47 €

Delivery time: 9 Days

Technical Data:

[dr] Inner Diameter: 40 mm

[L] Length (Total): 250 mm

Grease Coating: [Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)

[D] Outer Diameter: 60 mm

Basic Load Rating Dynamic Rating (Detail): 3430 N

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

LHBBLN40G

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information

Single Type

Double Type

Long

Type			Linear Bushing Used	Housing		Operating Ambient Temperature
Single Type	Double Type	Long		[M] Material	[S] Surface Treatment	Operating Ambient Temperature
LHBBN	LHBBWN	LHBBLN	LMU	Aluminum Alloy	Clear Anodize	－20 to 80°C

Specification Table

Part Number
LHBBN10 LHBBWN20 LHBBWN20L LHBBWN20G LHBBWN20H	(L Type Greased) (G Type Greased) (H Type Greased)

[ ! ] Alternative grease types available.

dr	Tolerance			L			L₁			h	H	(H₁)	(H₂)	W	W₁	W₂	M	d	ℓ	(A)	(B)	N	J	C
dr	Single	Double	Long	Single	Double	Long	Single	Double	Long	h	H	(H₁)	(H₂)	W	W₁	W₂	M	d	ℓ	(A)	(B)	N	J	C
10	0	0	—	35	68	—	21	46	—	13	26	21	8	40	28	6	M5	4.3	12	15.5	0.4	7.5	—	5
12	－ 0.009	－ 0.010		36	70	—	26	50	—	15	28	24		42	30.5	5.75				17.5	0.4	7	—	4
13				39	75	—	26	50	—	15	30	24.5		44	33	5.5				19	0.85	7	—	5.5
16			0 - 0.015	44	85	118	34	60	88	19	38.5	32.5	9	50	36	7				19.8	0.85	6.5	7	6
20	0	0	0	50	96	134	40	70	100	21	41	35	11	54	40	7	M6	5.2		21	0.5	7.5	8	6
25	－ 0.010	－ 0.012	－ 0.018	67	130	185	50	100	138	26	51.5	42	12	76	54	11	M8	7	18	36	1	4.5	9	9.5
30				72	140	200	58	110	150	30	59.5	49	15	78	58	10				39.9	0.75	5.5	9	10.5
35	0	0	0	80	155	220	60	120	170	34	68	54	18	90	70	10				53	1.5	6	10	14
40	－ 0.012	－ 0.015	－ 0.021	90	175	250	60	140	190	40	78	62	20	102	80	11	M10	8.7	25	61		5.5	12	16
50				110	215	310	80	160	230	52	102	80	25	122	100	11	M10	8.7	25	81		5.5	12	22

[!] Inner surfaces of dowel holes are not anodized. [!] Anti-rust oil is applied at the time of delivery.
[!] The datum surface is located on the other side of Part Number label.
[ ! ] Position of dowel holes for Long Type is ±0.02 from the center of dr.

dr	Dowel Hole Dimensions				Basic Load Rating						Allowable Static Moment			Mass (g)
	P	ℓ₂	G	E	C (Dynamic) N			Co (Static) N			(N⋅m)			Mass (g)
	P	ℓ₂	G	E	Single	Double	Long	Single	Double	Long	Single	Double	Long	Single	Double	Long
10	4	5	5	—	372	588	—	549	1100	—	—	7.24	—	92	180	—
12				—	412	657	—	598	1200	—	—	10.9	—	102	205	—
13				—	510	813	—	784	1570	—	—	11.6	—	120	240	—
16				88	775	1230	1230	1180	2350	2350	—	19.7	73.5	220	400	527
20	5	(5)	6	100	882	1400	1400	1370	2740	2740	—	26.8	98.0	255	570	682
25		6		138	980	1560	1560	1570	3140	3140	—	43.4	157	600	1200	1586
30		6		150	1570	2490	2490	2740	5490	5490	—	82.8	297	735	1480	1960
35				170	1670	2650	2650	3140	6270	6270	—	110	373	1100	2200	2974
40	6	7	7	190	2160	3430	3430	4020	8040	8040	—	147	553	1590	3200	4285
50	6	7	7	230	3820	6080	6080	7940	15900	15900	—	397	—	3340	6700	8620

[ ! ] ℓ₂ of LHBBLN20 is 5.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
LHBBLN40G

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	[dr] Inner Diameter (mm)	[L] Length (Total) (mm)	Grease Coating	[D] Outer Diameter (mm)	Basic Load Rating Dynamic Rating (Detail) (N)	Basic Load Rating Static Rating (N)	Tolerance of Inscribed Circle (Minus Side) (mm)	Basic Rated Load, Dynamic Rating
	211.47 €	1	Available	9 Days	10	40	250	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	60	3430	8040	-0.021	3430

Specifications/Overview

Installation Example

Conventional Type		Dowel Hole Type

Locating with plate end datum		Locating with dowel holes

■Features of Dowel Hole Type
·By the dowel holes provided on the mounting interface surface, locating workpieces using the side datum can be eliminated. (See Installation Example above)
·Machining steps can be reduced for the top plate to be mounted on the block.

Basic information

Type2	Housing Wide Block	RoHS Information	RoHS Requirements Fulfilled	Features, Areas of Application	Not Applicable
Material of Outer Cylinder	EN 1.3505 Equiv.	Outer Cylinder Surface Treatment	Clear Anodize	Linear Motion / Rotational Motion	Linear Bushing (Linear Motion Only)
Ball Material	EN 1.3505 Equiv.	Retainer Material	Plastic (Duracon M90 Equivalent)	Seals	With Seal
Outer Cylinder Material	EN 1.3505 Equiv.

This page is Linear Bushings with Pillow Blocks - Double Bushing with Dowel Holes, part number LHBBLN40G.
You can find the detail information about specifications and dimensions on part number LHBBLN40G.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- LHBBLN
- LHBBN
- LHBBWN
Clear
[dr] Inner Diameter(mm)
10

12

13

16

20

25

30

35

40

50
Clear
[L] Length (Total)(mm)
35

36

39

44

50

67

68

70

72

75

80

85

90

96

110

118

130

134

140

155

175

185

200

215

220

250

310
Clear
Grease Coating
- Not Provided
- Grease coating
  - L Type: ET-100K (Heat resistance)
  - H Type: FGL-1 (Special hygienic requirements)
  - A Type: Alvania S2 (For general-purpose industrial use)
  - G Type: LG2 (Low dust generation/manufactured by NSK)
  - Y Type: AFF (Low dust generation, manufactured by THK)
Clear
[D] Outer Diameter(mm)
19

21

23

28

32

40

45

52

60

80
Clear
Basic Rated Load, Dynamic Rating
372

412

510

588

657

775

813

882

980

1230

1400

1560

1570

1670

2160

2490

2650

3430

3820

6080
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less

9 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
LHBBLN16H
LHBBLN16L
LHBBLN16Y
LHBBLN40H
LHBBLN40L
LHBBLN40Y

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	[dr] Inner Diameter (mm)	[L] Length (Total) (mm)	Grease Coating	[D] Outer Diameter (mm)	Basic Load Rating Dynamic Rating (Detail) (N)	Basic Load Rating Static Rating (N)	Tolerance of Inscribed Circle (Minus Side) (mm)	Basic Rated Load, Dynamic Rating
65.93 €	1	Available	9 Days	10	16	118	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	28	1230	2350	-0.015	1230
65.93 €	1	Available	9 Days	10	16	118	[Grease coating] L Type: ET-100K (Heat resistance)	28	1230	2350	-0.015	1230
73.84 €	1	Available	9 Days	-	16	118	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	28	-	-	-	1230
211.47 €	1	Available	9 Days	10	40	250	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	60	3430	8040	-0.021	3430
211.47 €	1	Available	9 Days	10	40	250	[Grease coating] L Type: ET-100K (Heat resistance)	60	3430	8040	-0.021	3430
173.93 €	1	Available	9 Days	-	40	250	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	60	-	-	-	3430