Cantilever Shafts / shouldered / external thread, internal thread / spanner flat / configurable (Part Numbers - CAD Download)

View the FAQ (7)

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog

Back to the Category Cantilever Shafts/Cantilever Bolts

Technical Drawing - Cantilever Shafts

Cantilever Shafts/Standard/Threaded/w Tapped End:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Cantilever Shafts

Type		Material	Surface Treatment
Thread Length Fixed	Thread Length Configurable	Material	Surface Treatment
FXAB	FXNAB	EN 1.1191 Equiv.	Black Oxide
PFXAB	PFXNAB	EN 1.1191 Equiv.	Electroless Nickel Plating
SFXAB	SFXNAB	EN 1.4301 Equiv.	-
PHFXAB	-	EN 1.7220 Equiv. Hardness: 35 ~ 40HRC	Electroless Nickel Plating

Further specifications can be found under the tab More information.

Composition of a Product Code - Cantilever Shafts

Part Number	-	Y	-	F	-	N	-	MA
FXAB10 PLXNAB12	- -	25 15	- -	F18 F25	-	N12	- -	MA5 MA6

Alterations - Cantilever Shafts

General Information - Cantilever Shafts

Cantilever bins with retaining ring groove - cantilever pin with external thread - cantilever pin with thread - cantilever pin with collar - cantilever pin with shoulder - cantilever pin with female thread - cantilever pin with flange - cantilever pin with flange and collar

Selection details of cantilever shafts/cantilever bolts

- Material: stainless steel, steel, tempered steel

- Coatings: untreated, burnished, nickel-plated

- Fastening: retaining ring, internal thread, external thread, centring collar with internal thread

- ISO tolerance: g6

- Thread: M3 to M20

- Straightness: up to 0.02 mm

- Roundness: up to 0.02 mm

- Shaft diameter: 3 to 50 mm

-Length: 3 to 150 mm

Description/Basics

They are basically used to support rotary rolling bearings. The support position can be precisely determined by its configurability. The different mounting variants offer a compact and space-saving option for many applications, e.g., to accommodate ball bearings.
Cantilever shafts with collar or shoulder are well suited to determine a support position. The collar serves as a contact surface for the bearing inner wheel. Since the collar of the cantilever shaft can be configured, individual adaptation is simple. The variant [YKC] offers the option of a particularly precise axle bolt with collar, with a length tolerance of +/- 0.05 mm. Due to this property, an additional washers can be omitted with this cantilever shaft.
The cantilever shafts are also available with double collars or double offset. These are suitable for idler pulleys with a small diameter, since the reduced additional shoulder can prevent grinding of the idler pulley.
Cantilever shafts with retaining ring groove (groove) are the most commonly used bearing bolts, because the retaining rings allows for easy assembly and disassembly. The cantilever shafts including the retaining ring can be delivered with the [SET] option. We also offer threaded cantilever shafts that can be selected with external threads or internal threads.
As a special form, our product range offers cantilever shafts with flanges. Due to the large contact surface, higher forces can be absorbed and distributed more evenly compared to conventional cantilever shafts. If you want to attach ball bearings that also have to withstand axial forces, for example, the cantilever shaft with flange offers a good solution. Due to its versatility, the cantilever shaft with flange can be used for a wide variety of design solutions.
Our product range includes various drives for assembly. From the typical hexagon to spanner flat, to additional cross holes with threads that can be used for example for a tension application for clamping devices.

The field of application of cantilever shafts in mechanical engineering is fundamentally very large. They are utilised in synchronous drives, chain transmission or in various tasks in device construction
Bearing pins can be used in combination with ball bearings or plain bearing bushings. Among other things, you can select roller idlers (with rolling bearings), idler pulleys or timing pulleys. As an alternative for limited installation space, we offer cam rollers, which come assembled and ready to install consisting of cantilever shafts and rolling bearings.
Bearing pins are also often used in conjunction with links to ensure different movement sequences.
For high loads, we offer the cantilever shafts made of heat-treated steel, which are produced to be wear-resistant and durable with a hardness of up to 40HRC.

Our product range also offers suitable screws and nuts for fastening cantilever shafts.

Application Examples - Cantilever Shafts

Application example - cantilever pin with idler pulley - cantilever pin with female thread - shaft for idler pulley - bolt for idler pulley - cantilever bolt with thread

Application example: deflection roller
(1) Cantilever shaft, (2) Idler pulley, (3) Spacer washer, (4) Mounting angle, (5) Screw, (6) Mounting plate

Application example - cantilever pin with chain idler - cantilever pin with centring collar - cantilever pin double offset - cantilever pin with double collar - cantilever pin with female thread

Application example: chain idlers
(1) Cantilever shafts, (2) Chain idlers, (3) Spacer washer, (4) Screw

Application example - cantilever pin with clamping device - cantilever pin for clamping device - cantilever pin with cross hole and thread - cantilever pin with male thread - cantilever pin with thread - roller tensioner with adjusting screw

Application example: idler pulley
(1) Cantilever shaft, (2) Locknut, (3) Washer, (4) Idler pulley, (5) Threaded stopper block, (6) Adjusting screw

Application example - cantilever pin with plain bearing bushing - cantilever pin with retaining ring - cantilever pin with male thread - cantilever pin with articulated arm - cantilever pin with thrust washer - cantilever pin with thread

Application example: link with plain bearing bushing
(1) Cantilever shaft, (2) Retaining ring, (3) Links, (4) Plain bearing bushing, (5) Thrust washer

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
PFXNAB6-[2-60/1]-F[5-100/1]-N[6-12/1]-MA3
PFXNAB6A-[2-60/1]-F[5-100/1]-N[6-12/1]-MA3
PFXNAB8-[2-60/1]-F[5-100/1]-N[8-16/1]-MA4
PFXNAB8A-[2-60/1]-F[5-100/1]-N[8-16/1]-MA4
PFXNAB10-[2-60/1]-F[5-100/1]-N[10-20/1]-MA[4,5,6]
PFXNAB10A-[2-60/1]-F[5-100/1]-N[10-20/1]-MA[4,5,6]
PFXNAB12-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[5,6,8]
PFXNAB13-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[5,6,8]
PFXNAB15-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[6,8,10]
PFXNAB16-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[6,8,10]
PFXNAB17-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[6,8,10]
PFXNAB18-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[6,8,10]
PFXNAB20-[4-75/1]-F[10-150/1]-N[20-40/1]-MA[6,8,10,12]
PFXNAB20A-[4-75/1]-F[10-150/1]-N[20-40/1]-MA[6,8,10,12]
PFXNAB22-[4-75/1]-F[10-150/1]-N[20-40/1]-MA[6,8,10,12]
PFXNAB22A-[4-75/1]-F[10-150/1]-N[20-40/1]-MA[6,8,10,12]
PFXNAB25-[4-75/1]-F[10-150/1]-N[20-40/1]-MA[8,10,12,16]
PFXNAB25A-[4-75/1]-F[10-150/1]-N[20-40/1]-MA[8,10,12,16]
PFXNAB30-[4-75/1]-F[10-150/1]-N[20-40/1]-MA[8,10,12,16,20]
PFXNAB30A-[4-75/1]-F[10-150/1]-N[20-40/1]-MA[8,10,12,16,20]
PHFXAB6-[2-60/1]-F[5-100/1]-MA3
PHFXAB6A-[2-60/1]-F[5-100/1]-MA3
PHFXAB8-[2-60/1]-F[5-100/1]-MA4
PHFXAB8A-[2-60/1]-F[5-100/1]-MA4
PHFXAB10-[2-60/1]-F[5-100/1]-MA[4,5,6]
PHFXAB10A-[2-60/1]-F[5-100/1]-MA[4,5,6]
PHFXAB12-[2-60/1]-F[10-150/1]-MA[5,6,8]
PHFXAB13-[2-60/1]-F[10-150/1]-MA[5,6,8]
PHFXAB15-[2-60/1]-F[10-150/1]-MA[6,8,10]
PHFXAB16-[2-60/1]-F[10-150/1]-MA[6,8,10]
PHFXAB17-[2-60/1]-F[10-150/1]-MA[6,8,10]
PHFXAB18-[2-60/1]-F[10-150/1]-MA[6,8,10]
PHFXAB20-[4-75/1]-F[10-150/1]-MA[6,8,10,12]
PHFXAB20A-[4-75/1]-F[10-150/1]-MA[6,8,10,12]
PHFXAB22-[4-75/1]-F[10-150/1]-MA[6,8,10,12]
PHFXAB22A-[4-75/1]-F[10-150/1]-MA[6,8,10,12]
PHFXAB25-[4-75/1]-F[10-150/1]-MA[8,10,12,16]
PHFXAB25A-[4-75/1]-F[10-150/1]-MA[8,10,12,16]
PHFXAB30-[4-75/1]-F[10-150/1]-MA[8,10,12,16,20]
PHFXAB30A-[4-75/1]-F[10-150/1]-MA[8,10,12,16,20]
SFXAB6-[2-60/1]-F[5-100/1]-MA3
SFXAB6A-[2-60/1]-F[5-100/1]-MA3
SFXAB8-[2-60/1]-F[5-100/1]-MA4
SFXAB8A-[2-60/1]-F[5-100/1]-MA4
SFXAB10-[2-60/1]-F[5-100/1]-MA[4,5,6]
SFXAB10A-[2-60/1]-F[5-100/1]-MA[4,5,6]
SFXAB12-[2-60/1]-F[10-150/1]-MA[5,6,8]
SFXAB13-[2-60/1]-F[10-150/1]-MA[5,6,8]
SFXAB15-[2-60/1]-F[10-150/1]-MA[6,8,10]
SFXAB16-[2-60/1]-F[10-150/1]-MA[6,8,10]
SFXAB17-[2-60/1]-F[10-150/1]-MA[6,8,10]
SFXAB18-[2-60/1]-F[10-150/1]-MA[6,8,10]
SFXAB20-[4-75/1]-F[10-150/1]-MA[6,8,10,12]
SFXAB20A-[4-75/1]-F[10-150/1]-MA[6,8,10,12]
SFXAB22-[4-75/1]-F[10-150/1]-MA[6,8,10,12]
SFXAB22A-[4-75/1]-F[10-150/1]-MA[6,8,10,12]
SFXAB25-[4-75/1]-F[10-150/1]-MA[8,10,12,16]
SFXAB25A-[4-75/1]-F[10-150/1]-MA[8,10,12,16]
SFXAB30-[4-75/1]-F[10-150/1]-MA[8,10,12,16,20]
SFXAB30A-[4-75/1]-F[10-150/1]-MA[8,10,12,16,20]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shaft Diameter (mm)	Material	Surface Treatment	Hardness	Material	Thread Length Specifying Method	M (Coarse)	H Dimension (mm)	Thread Length N (mm)	F (mm)	Thread Dia. Selection [MA]	Y (mm)
-	1	4 Days	10	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	6	10	6 ～ 12	5 ～ 100	3	2 ～ 60
-	1	4 Days	10	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	6	14	6 ～ 12	5 ～ 100	3	2 ～ 60
-	1	4 Days	10	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	8	12	8 ～ 16	5 ～ 100	4	2 ～ 60
-	1	4 Days	10	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	8	16	8 ～ 16	5 ～ 100	4	2 ～ 60
-	1	4 Days	10	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	10	15	10 ～ 20	5 ～ 100	4 ～ 6	2 ～ 60
-	1	4 Days	10	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	10	20	10 ～ 20	5 ～ 100	4 ～ 6	2 ～ 60
-	1	4 Days	10	12	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	12	17	12 ～ 24	10 ～ 150	5 ～ 8	2 ～ 60
-	1	4 Days	10	13	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	12	18	12 ～ 24	10 ～ 150	5 ～ 8	2 ～ 60
-	1	4 Days	10	15	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	12	20	12 ～ 24	10 ～ 150	6 ～ 10	2 ～ 60
-	1	4 Days	10	16	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	12	21	12 ～ 24	10 ～ 150	6 ～ 10	2 ～ 60
-	1	4 Days	10	17	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	12	22	12 ～ 24	10 ～ 150	6 ～ 10	2 ～ 60
-	1	4 Days	10	18	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	12	23	12 ～ 24	10 ～ 150	6 ～ 10	2 ～ 60
-	1	4 Days	10	20	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	20	26	20 ～ 40	10 ～ 150	6 ～ 12	4 ～ 75
-	1	4 Days	10	20	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	16	26	20 ～ 40	10 ～ 150	6 ～ 12	4 ～ 75
-	1	4 Days	10	22	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	20	28	20 ～ 40	10 ～ 150	6 ～ 12	4 ～ 75
-	1	4 Days	10	22	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	16	28	20 ～ 40	10 ～ 150	6 ～ 12	4 ～ 75
-	1	4 Days	10	25	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	20	31	20 ～ 40	10 ～ 150	8 ～ 16	4 ～ 75
-	1	4 Days	10	25	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	16	31	20 ～ 40	10 ～ 150	8 ～ 16	4 ～ 75
-	1	4 Days	10	30	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	20	36	20 ～ 40	10 ～ 150	8 ～ 20	4 ～ 75
-	1	4 Days	10	30	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	EN 1.1191 Equiv.	Thread Length Configurable Type	16	36	20 ～ 40	10 ～ 150	8 ～ 20	4 ～ 75
-	1	10 Days	10	6	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	6	10	9	5 ～ 100	3	2 ～ 60
-	1	10 Days	10	6	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	6	14	9	5 ～ 100	3	2 ～ 60
-	1	10 Days	10	8	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	8	12	12	5 ～ 100	4	2 ～ 60
-	1	10 Days	10	8	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	8	16	12	5 ～ 100	4	2 ～ 60
-	1	10 Days	10	10	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	10	15	15	5 ～ 100	4 ～ 6	2 ～ 60
-	1	10 Days	10	10	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	10	20	15	5 ～ 100	4 ～ 6	2 ～ 60
-	1	10 Days	10	12	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	12	17	18	10 ～ 150	5 ～ 8	2 ～ 60
-	1	10 Days	10	13	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	12	18	18	10 ～ 150	5 ～ 8	2 ～ 60
-	1	10 Days	10	15	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	12	20	18	10 ～ 150	6 ～ 10	2 ～ 60
-	1	10 Days	10	16	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	12	21	18	10 ～ 150	6 ～ 10	2 ～ 60
-	1	10 Days	10	17	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	12	22	18	10 ～ 150	6 ～ 10	2 ～ 60
-	1	10 Days	10	18	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	12	23	18	10 ～ 150	6 ～ 10	2 ～ 60
-	1	7 Days	10	20	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	20	26	30	10 ～ 150	6 ～ 12	4 ～ 75
-	1	7 Days	10	20	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	16	26	24	10 ～ 150	6 ～ 12	4 ～ 75
-	1	7 Days	10	22	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	20	28	30	10 ～ 150	6 ～ 12	4 ～ 75
-	1	7 Days	10	22	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	16	28	24	10 ～ 150	6 ～ 12	4 ～ 75
-	1	7 Days	10	25	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	20	31	30	10 ～ 150	8 ～ 16	4 ～ 75
-	1	7 Days	10	25	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	16	31	24	10 ～ 150	8 ～ 16	4 ～ 75
-	1	7 Days	10	30	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	20	36	30	10 ～ 150	8 ～ 20	4 ～ 75
-	1	7 Days	10	30	Steel	Electroless Nickel Plating	Hardness Spec-designed	EN 1.7220 Equiv.	Thread Length Fixed Type	16	36	24	10 ～ 150	8 ～ 20	4 ～ 75
-	1	3 Days	10	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	6	10	9	5 ～ 100	3	2 ～ 60
-	1	3 Days	10	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	6	14	9	5 ～ 100	3	2 ～ 60
-	1	3 Days	10	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	8	12	12	5 ～ 100	4	2 ～ 60
-	1	3 Days	10	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	8	16	12	5 ～ 100	4	2 ～ 60
-	1	3 Days	10	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	10	15	15	5 ～ 100	4 ～ 6	2 ～ 60
-	1	3 Days	10	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	10	20	15	5 ～ 100	4 ～ 6	2 ～ 60
-	1	3 Days	10	12	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	12	17	18	10 ～ 150	5 ～ 8	2 ～ 60
-	1	3 Days	10	13	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	12	18	18	10 ～ 150	5 ～ 8	2 ～ 60
-	1	3 Days	10	15	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	12	20	18	10 ～ 150	6 ～ 10	2 ～ 60
-	1	3 Days	10	16	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	12	21	18	10 ～ 150	6 ～ 10	2 ～ 60
-	1	3 Days	10	17	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	12	22	18	10 ～ 150	6 ～ 10	2 ～ 60
-	1	3 Days	10	18	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	12	23	18	10 ～ 150	6 ～ 10	2 ～ 60
-	1	3 Days	10	20	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	20	26	30	10 ～ 150	6 ～ 12	4 ～ 75
-	1	3 Days	10	20	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	16	26	24	10 ～ 150	6 ～ 12	4 ～ 75
-	1	3 Days	10	22	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	20	28	30	10 ～ 150	6 ～ 12	4 ～ 75
-	1	3 Days	10	22	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	16	28	24	10 ～ 150	6 ～ 12	4 ～ 75
-	1	3 Days	10	25	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	20	31	30	10 ～ 150	8 ～ 16	4 ～ 75
-	1	3 Days	10	25	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	16	31	24	10 ～ 150	8 ～ 16	4 ～ 75
-	1	3 Days	10	30	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	20	36	30	10 ～ 150	8 ～ 20	4 ～ 75
-	1	3 Days	10	30	Stainless Steel	Not Provided	Hardness Not Spec-designed	EN 1.4301 Equiv.	Thread Length Fixed Type	16	36	24	10 ～ 150	8 ～ 20	4 ～ 75

Back to the Category Cantilever Shafts/Cantilever Bolts

Technical Drawing - Cantilever Shafts

Open the technical drawing in the new window

Specification Tables - Cantilever Shafts

Part Number		Dg6		1mm Increment			MA (Coarse) Selection	H	W	M (Coarse)	Unit Price
Type	No.			Y	F	N					Thread Length Fixed				Thread Length Configurable
Type	No.			Y	F	N					FXAB	PFXAB	SFXAB	PHFXAB	FXNAB	PFXNAB	SFXNAB
Thread Length Fixed FXAB PFXAB SFXAB PHFXAB Thread Length Configurable FXNAB PFXNAB SFXNAB	6	6	-0.004 -0.012	2~60	5~100	6~12	3	10	8	M 6
	6A	6	-0.004 -0.012			6~12	3	14	12	M 6
	8	8	-0.005 -0.014			8~16	4	12	10	M 8
	8A	8				8~16	4	16	14	M 8
	10	10				10~20	4 5 6	15	13	M10
	10A	10				10~20	4 5 6	20	17	M10
	12	12	-0.006 -0.017		10~150	12~24	5 6 8	17	14	M12
	13	13					5 6 8	18	15
	15	15					6 8 10	20	17
	16	16						21	18
	17	17						22	19
	18	18						23	20
	20	20	-0.007 -0.020	4~75		20~40	6 8 10 12	26	24	M20
	20A	20						26		M16
	22	22						28		M20
	22A	22						28		M16
	25	25					8 10 12 16	31	27	M20
	25A	25					8 10 12 16	31	27	M16
	30	30					8 10 12 16 20	36	32	M20
	30A	30					8 10 12 16 20	36	32	M16

N is available for Thread Length Configurable Type only.
Table 1

MA	Y+F
M 3	Y+F≥11.5
M 4	Y+F≥14.0
M 5	Y+F≥16.2
M 6	Y+F≥18.5
M 8	Y+F≥23.5
M10	Y+F≥28.5
M12	Y+F≥35.5
M16	Y+F≥45.0
M20	Y+F≥55.0

Alterations - Cantilever Shafts

Products homepage

Basic information

Shaft Retaining Method	Threaded (Lock Nut)	Bearing Retaining Method	Tapered (Screw)	Shoulder Shape	Wrench Flats

Configure

140Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shaft Diameter(mm)
6

8

10

12

13

15

16

17

18

20

22

25

30
Clear
Material
- Steel
- Stainless Steel
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
Clear
Hardness
- Hardness Spec-designed
- Hardness Not Spec-designed
Clear
Material
- EN 1.1191 Equiv.
- EN 1.4301 Equiv.
- EN 1.7220 Equiv.
Clear
Thread Length Specifying Method
- Thread Length Configurable Type
- Thread Length Fixed Type
Clear
M (Coarse)
- 6
- 8
- 10
- 12
- 16
- 20
Clear
H Dimension(mm)
10

12

14

15

16

17

18

20

21

22

23

26

28

31

36
Clear
Thread Length N(mm)
9

12

15

18

24

30
[6-40/1mm Unit(s)]
Clear
F(mm)
[5-150/1mm Unit(s)]
Clear
Thread Dia. Selection [MA]
3

4

5

6

8

10

12

16

20
Clear
Y(mm)
[2-75/1mm Unit(s)]
Clear
Type
- FXAB
- FXNAB
- PFXAB
- PFXNAB
- PHFXAB
- SFXAB
- SFXNAB
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

3 Days or Less

4 Days or Less

7 Days or Less

10 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Do you have long axle bolts?: Answer:
We offer axle bolts in a configurable length of approx. 150 mm. If this length is not sufficient, a rotational axis may serve as an alternative depending on the design.
Question:
Do you have hollow axle bolts?: Answer:
Currently, we do not offer hollow axle bolts in our product line. However, MISUMI offers hollow rotation axes. These can be configured in a similar way and represent a possible alternative depending on the application.
Question:
What is the roundness of the axle bolts?: Answer:
Depending on the cantilever shaft, the roundness is up to 0.02 mm. It is recommended to refer to the values specified in the corresponding technical drawing and the specifications of the axle bolt.
Question:
How straight are axle bolts aligned?: Answer:
Our axle bolts are manufactured to a precise straightness of approx. 0.02 mm. The assembly side of the MISUMI axle bolts is finer to allow for a straight fit and exact alignment. Refer to technical drawing or specifications for details.
Question:
Are axle bolts with flange suitable for tension rollers?: Answer:
Flange cantilever pins can also be used in idler pulley applications. If a cantilever pin with collar can be used, an additional spacer sleeve can be omitted. The collar of the flange cantilever pin is configurable and can be individually adjusted to the bearing position.
Question:
Do you have stainless axle bolts?: Answer:
MISUMI offers stainless steel cantilever pins. In addition, our steel cantilever pins are available with an optional surface treatment to protect them from corrosion and environmental conditions. Our cantilever pins are available in both burnished and nickel-plated options.
Question:
Do you have axle bolts made of alloy quenched and tempered (Q & T) steel?: Answer:
In the MISUMI online shop, you will find a large number of cantilever pins made of tempered steel. These can be additionally protected against corrosion with burnished or nickel-plated finishes.