Deep groove ball bearings / single row / small diameters / ZZ / MISUMI (B692AZZ)

Click on this image to zoom in.

Volume Discount

MISUMI

Product Details:

Manufacturer part number: B692AZZ

Brand: MISUMI

Price: 4.54 €

Delivery time: Same day

Technical Data:

I.D. d: 2.5 φ

O.D. D: 7 φ

Width B (or T): 3.5 mm

Basic Load Rating Cr (Dynamic): 385 N

Allowable Rotational Speed: 63000 1/min

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

B692AZZ

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Small/Deep Groove/Double Shielded:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Ball Bearings

Material: EN 1.3505 Equiv.
For further specifications please see the More information tab.
Information on tolerances and rotational accuracy of the radial bearings can be found in the following PDF: Ball bearing table / tolerances as PDF

Composition of a Product Code - Ball Bearings

Part Number

B626ZZ

General Information - Ball Bearings

Ball bearing - deep groove ball bearing - axial bearing - axial ball bearing - axial groove ball bearing - angular ball bearing - spherical ball bearing - tension bearing

Ball Bearing Selection Details

- Ball material: steel, stainless steel, ceramic, plastic, glass, chrome-plated

- Type of bearings: axial ball bearings, thin section bearings, spherical ball bearings, deep groove ball bearings, single-row angular ball bearings, double-row ball bearings, tension bearings, four-point bearings

- Outer ring: flat, spherical, with flange, annular groove, U-groove, V-groove

- Properties: heat-resistant, non-magnetic, corrosion-resistant, dust-proof, vacuum, high speed

- Inner diameter: 2 mm to 50 mm

- Outer diameter: 5 mm to 110 mm

Ball bearing designation (suffix):

In addition to the dimensional designation of the ball bearing, ball bearings often also have a designation for a cover disc or sealing disc. The following names are the most common names of various manufacturers that can be selected in the MISUMI online shop.

- Double-sided sealing washer: 2RSH/2RS1, 2RSR/C-2HRS, DDU/DD
- Single-sided sealing washer: RSH/RS1, RSR/C-HRS, DU
- Double-sided sealing washer with low friction: 2RSL/2RZ/VV
- Double-sided cover disc: 2Z/ZZ, 2ZR/C-2Z
- Single sided cover disc: Z, ZR/C-Z/Z

Description/Basics

Rolling bearings

Rolling bearings are generally divided into ball bearings and roller bearings. Ball bearings are a popular type of rolling bearings due to their high permissible speed and low friction.
In the MISUMI online shop, you can purchase ball bearings that can be customized to your applications and environmental conditions. Our ball bearings are available in different materials and in a combination of different materials (hybrid bearings). In addition, MISUMI offers ball bearings already integrated into the housing as bearing housing.

Grooved ball bearings

Grooved ball bearings are the most commonly used rotary rolling bearings. This type of ball bearing is ideally suited for supporting rotating machine elements. A grooved ball bearings are intended for load bearing of radial forces and light axial forces. Grooved ball bearings are designed for high speeds and are used in a wide variety of industrial applications and designs. MISUMI already offers ball bearings integrated into housings and holders as bearing housings.

Areas of Application

Ball bearing - chemical resistance

Chemical resistance		Plastic ball			Metal ball		Ceramic ball
Bearing rings		UHMW	PEEK	PTFE	EN 1.4125 equivalent	EN 1.4301 equivalent	EN 1.4125 equivalent	EN 1.4542 equivalent
Cover plate		-	-	-	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent
Bearing balls		Glass	Ceramic (aluminum oxide)	Ceramic (aluminum oxide)	EN 1.4125 equivalent	EN 1.4301 equivalent	Ceramic	Ceramic
Ball cage		UHMW	PEEK	PTFE	EN 1.4301 equivalent	EN 1.4301 equivalent	Fluoroplastic	Fluoroplastic
Acids	Hydrochloric acid	suitable to a limited extent	good	very good	unsuitable	good	suitable to a limited extent	good
	Sulfuric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
	Nitric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
Bases		unsuitable	very good	very good	unsuitable	very good	good	very good
Solvents		very good	very good	very good	unsuitable	very good	good	very good
Salt water		very good	very good	very good	unsuitable	very good	good	very good
Water		very good	very good	very good	unsuitable	very good	very good	very good

Comparison Table The ball bearing comparison table is provided for comparison purposes only (consider the lubricant and the sealing washer separately).

Ball bearing materials

In the MISUMI online shop, ball bearings are available in cost-effective rolling bearing steel, corrosion-resistant stainless steel and stainless steel. Furthermore, our product range includes various hybrid bearings in the following combinations: metal & ceramic, plastic & ceramic, plastic & glass.

Our various materials offer good resistance to various environmental influences. Our ball bearing shop includes the ball materials stainless steel, steel, UHMW, PEEK, PTFE, ceramic and glass.

Instructions for Use / Installation Information - Ball Bearings

Installation Information

An incorrect assembly and disassembly can damage a ball bearing. Therefore, a suitable tool must always be used to assemble and disassemble ball bearings or roller bearings.
Ball bearings should not be assembled with a hammer, as this can deform the ball bearing. It is recommended using a suitable press. During pressing, the contact surface can be provided with lubricant to protect the surfaces and facilitate assembly.
It is best to use a bearing puller for disassembly.

Maintenance

The ball bearing in roller bearings should be inspected for damage during maintenance.
Before regreasing, a ball bearing should first be thoroughly cleaned.
Remaining contamination in the bearing can damage the ball bearing. As a rule, a ball bearing should not be completely filled with grease, as this can cause the bearing to heat up too much and can cause it to fail.
For encapsulated and sealed ball bearings, it is recommended to replace the bearing. Maintenance is not recommended due to the risk of damage to the cover place or seal.

Supplementary Article

Bearing Lock Nuts

Shaft nuts - lock nuts - steel shaft nut - stainless steel shaft nut - shaft with retaining nut - shaftnNut with clamp screw - shaft nut with grub screw - shaft assembly

Bearings with Housing

Bearing with housing - bearing housing - bearing units - ball bearing holder - ball bearing with housing - bearing housing with flange - shaft holder with ball bearing

Axles / Rotary Shafts

Rotary axis - offset rotary shaft - double offset shaft - female threaded shaft - keyway shaft

Drive shafts

Motor shaft - torsion shaft - shaft with collar - shaft with shoulder - offset shaft - keyway shaft

Plain Bearing (Bushes)

Plain bearing - maintenance free - plain bearing bushings - plain bearing bushing with collar - plain bearing bushing with flange - plastic bushing - plastic plain bearing bushing

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
B692AZZ

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
	4.54 €	1	Available	Same day Stock	10	2.5	7	3.5	385	63000	127

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Specification Tables - Ball Bearings

Part Number	d	D	B	r (min)	Basic Load Rating		Allowable Rotational Speed rpm (Reference)	Relative Dimensions			Mass (g) (Reference)	Unit Price
Part Number	d	D	B	r (min)	Cr (Dynamic) N	Cor (Static) N	Allowable Rotational Speed rpm (Reference)	Ds (min)	dh (max)	R (max)	Mass (g) (Reference)	Unit Price
B682ZZ	2	5	2.3	0.08	169	50	85000	2.7	3.9	0.08	0.17
B692ZZ		6	3.0	0.15	330	98	75000	3.0	4.8	0.15	0.38
B602ZZ		7	3.5	0.15	385	127	60000	3.2	5.8	0.15	0.58
B682AZZ	2.5	6	2.6	0.08	208	74	71000	3.7	4.9	0.08	0.29
B692AZZ	2.5	7	3.5	0.15	385	127	63000	3.85	5.65	0.15	0.55
B673ZZ	3	6	2.5	0.1	208	74	71000	3.6	5.4	0.08	0.2
B683ZZ		7	3	0.1	390	130	63000	3.9	5.8	0.1	0.45
B693ZZ		8	4	0.15	560	179	60000	4.2	6.8	0.15	0.83
B603ZZ		9	5		570	187	56000		7.8		1.45
B623ZZ		10	4		630	218	50000		8.8		1.66
B633ZZ		13	5	0.2	1300	485	40000	4.6	11.4	0.2	3.33
B674ZZ	4	7	2.5	0.1	222	88	60000	4.6	6.4	0.08	0.29
B684ZZ		9	4	0.1	640	224	53000	5.0	7.8	0.1	1.01
B694ZZ		11		0.15	715	276	48000	5.2	9.8	0.15	1.75
B604ZZ		12		0.2	957	350	48000	5.6	10.4	0.2	2.29
B624ZZ		13	5	0.2	1300	485	40000	5.6	11.4	0.2	3.04
B634ZZ		16	5	0.3	1340	523	36000	6	14	0.3	5.21
B675ZZ	5	8	2.5	0.1	218	131	53000	5.8	7.4	0.1	0.34
B685ZZ		11	5	0.15	715	281	45000	6.2	9.8	0.2	1.96
B695ZZ		13	4	0.2	1080	430	43000	6.6	11.4		2.5
B605ZZ		14	5	0.2	1330	505	40000	6.6	12.4		3.48
B625ZZ		16	5	0.3	1730	670	36000	7	14	0.3	4.86
B635ZZ		19	6	0.3	2336	835	32000	7	17	0.3	8.34
B676ZZ	6	10	3	0.1	495	218	45000	7.04	9.3	0.1	0.68
B686ZZ		13	5	0.15	1080	440	40000	7.0	11.8	0.15	2.69
B696ZZ		15	5	0.2	1350	530	40000	7.6	13.4	0.2	3.72
B606ZZ		17	6	0.3	2190	835	38000	8	15	0.3	6.08
B626ZZ		19	6		2340	885	32000		17		7.94
B636ZZ		22	7		3333	1423	30000		20		14.5
B678ZZ	8	12	3.5	0.1	543	274	40000	9.05	11.33	0.1	0.97
B688ZZ		16	5	0.2	1610	710	36000	9.6	14.4	0.2	4.02
B698ZZ		19	6	0.3	1990	865	36000	10	17	0.3	7.18
B608ZZ		22	7		3350	1400	34000		20		12
B628ZZ		24	8		4000	1590	28000		22		17
B638ZZ		28	9		4563	1983	28000		26		30.3

kgf=Nx0.101972

Products homepage

Basic information

Bearing Ring Shape	Ball	Materials of Inner and Outer Ring	EN 1.3505 Equiv.	Shield material and shape	Double Shielded
Outer Ring Type	Flat	Accuracy (JIS)	Class 0	Specifications/Environment	Standard
Load Direction	Radial	Number of Bearing Ring Rows	Single Track	Size Standard	Metric Series
Rolling Element Material	EN 1.3505 Equiv.	Seal Part Structure	Double Shielded

This page is Deep groove ball bearings / single row / small diameters / ZZ / MISUMI, part number B692AZZ.
You can find the detail information about specifications and dimensions on part number B692AZZ.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Type
- B602ZZ
- B603ZZ
- B604ZZ
- B605ZZ
- B606ZZ
- B608ZZ
- B623ZZ
- B624ZZ
- B625ZZ
- B626ZZ
- B628ZZ
- B633ZZ
- B634ZZ
- B635ZZ
- B636ZZ
- B638ZZ
- B673ZZ
- B674ZZ
- B675ZZ
- B676ZZ
- B678ZZ
- B682AZZ
- B682ZZ
- B683ZZ
- B684ZZ
- B685ZZ
- B686ZZ
- B688ZZ
- B692AZZ
- B692ZZ
- B693ZZ
- B694ZZ
- B695ZZ
- B696ZZ
- B698ZZ
Clear
I.D. d(φ)
2

2.5

3

4

5

6

8
Clear
O.D. D(φ)
5

6

7

8

9

10

11

12

13

14

15

16

17

19

22

24

28
Clear
Width B (or T)(mm)
2.3

2.5

2.6

3

3.5

4

5

6

7

8

9
Clear
Basic Load Rating Cr (Dynamic)(N)
169

208

218

222

330

385

390

495

543

560

570

630

640

715

957

1080

1300

1330

1340

1350

1610

1730

1990

2190

2336

2340

3333

3350

4000

4563
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
B605ZZ
B606ZZ
B608ZZ
B692ZZ
B693ZZ
B694ZZ

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
2.15 €	1	Available	Same day Stock	10	5	14	5	1330	40000	505
2.15 €	1	Available	Same day Stock	10	6	17	6	2190	38000	835
2.26 €	1	Available	Same day Stock	10	8	22	7	3350	34000	1400
3.53 €	1	Available	Same day Stock	10	2	6	3	330	75000	98
3.15 €	1	Available	Same day Stock	10	3	8	4	560	60000	179
4.16 €	1	Available	Same day Stock	10	4	11	4	715	48000	276