Deep groove ball bearings / single row / ZZ / heat resistant, max. 160°C / MISUMI (HHB6000ZZ)

Click on this image to zoom in.

MISUMI

Product Details:

Manufacturer part number: HHB6000ZZ

Brand: MISUMI

Price: 11.72 €

Delivery time: 5 Days

Technical Data:

I.D. d: 10 φ

O.D. D: 26 φ

Width B (or T): 8 mm

Basic Load Rating Cr (Dynamic): 3900 N

Allowable Rotational Speed: 31000 1/min

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

HHB6000ZZ

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Heat Resistant/Max Operating Temperature 160Deg.C:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Ball Bearings

Type	Inner and Outer Ring		Shield	Rolling Element	Retainer
Type	Material	Hardness	Material	Material	Material
HHB ZZ	EN 1.4125 Equiv.	57~63HRC	EN 1.4301 Equiv.	EN 1.4125 Equiv.	EN 1.4301 Equiv.

For details on the tolerance and allowable values of inner and outer rings, >>P.2243
For further specifications please see the More information tab.
Information on tolerances and rotational accuracy of the radial bearings can be found in the following PDF: Ball bearing table / tolerances as PDF

Composition of a Product Code - Ball Bearings

Part Number

HHB696ZZ
HHB6003ZZ

General Information - Ball Bearings

Ball bearing - deep groove ball bearing - axial bearing - axial ball bearing - axial groove ball bearing - angular ball bearing - spherical ball bearing - tension bearing

Ball Bearing Selection Details

- Ball material: steel, stainless steel, ceramic, plastic, glass, chrome-plated

- Type of bearings: axial ball bearings, thin section bearings, spherical ball bearings, deep groove ball bearings, single-row angular ball bearings, double-row ball bearings, tension bearings, four-point bearings

- Outer ring: flat, spherical, with flange, annular groove, U-groove, V-groove

- Properties: heat-resistant, non-magnetic, corrosion-resistant, dust-proof, vacuum, high speed

- Inner diameter: 2 mm to 50 mm

- Outer diameter: 5 mm to 110 mm

Ball bearing designation (suffix):

In addition to the dimensional designation of the ball bearing, ball bearings often also have a designation for a cover disc or sealing disc. The following names are the most common names of various manufacturers that can be selected in the MISUMI online shop.

- Double-sided sealing washer: 2RSH/2RS1, 2RSR/C-2HRS, DDU/DD
- Single-sided sealing washer: RSH/RS1, RSR/C-HRS, DU
- Double-sided sealing washer with low friction: 2RSL/2RZ/VV
- Double-sided cover disc: 2Z/ZZ, 2ZR/C-2Z
- Single sided cover disc: Z, ZR/C-Z/Z

Description/Basics

Rolling bearings

Rolling bearings are generally divided into ball bearings and roller bearings. Ball bearings are a popular type of rolling bearings due to their high permissible speed and low friction.
In the MISUMI online shop, you can purchase ball bearings that can be customized to your applications and environmental conditions. Our ball bearings are available in different materials and in a combination of different materials (hybrid bearings). In addition, MISUMI offers ball bearings already integrated into the housing as bearing housing.

Grooved ball bearings

Grooved ball bearings are the most commonly used rotary rolling bearings. This type of ball bearing is ideally suited for supporting rotating machine elements. A grooved ball bearings are intended for load bearing of radial forces and light axial forces. Grooved ball bearings are designed for high speeds and are used in a wide variety of industrial applications and designs. MISUMI already offers ball bearings integrated into housings and holders as bearing housings.

Areas of Application

Ball bearing - chemical resistance

Chemical resistance		Plastic ball			Metal ball		Ceramic ball
Bearing rings		UHMW	PEEK	PTFE	EN 1.4125 equivalent	EN 1.4301 equivalent	EN 1.4125 equivalent	EN 1.4542 equivalent
Cover plate		-	-	-	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent
Bearing balls		Glass	Ceramic (aluminum oxide)	Ceramic (aluminum oxide)	EN 1.4125 equivalent	EN 1.4301 equivalent	Ceramic	Ceramic
Ball cage		UHMW	PEEK	PTFE	EN 1.4301 equivalent	EN 1.4301 equivalent	Fluoroplastic	Fluoroplastic
Acids	Hydrochloric acid	suitable to a limited extent	good	very good	unsuitable	good	suitable to a limited extent	good
	Sulfuric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
	Nitric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
Bases		unsuitable	very good	very good	unsuitable	very good	good	very good
Solvents		very good	very good	very good	unsuitable	very good	good	very good
Salt water		very good	very good	very good	unsuitable	very good	good	very good
Water		very good	very good	very good	unsuitable	very good	very good	very good

Comparison Table The ball bearing comparison table is provided for comparison purposes only (consider the lubricant and the sealing washer separately).

Ball bearing materials

In the MISUMI online shop, ball bearings are available in cost-effective rolling bearing steel, corrosion-resistant stainless steel and stainless steel. Furthermore, our product range includes various hybrid bearings in the following combinations: metal & ceramic, plastic & ceramic, plastic & glass.

Our various materials offer good resistance to various environmental influences. Our ball bearing shop includes the ball materials stainless steel, steel, UHMW, PEEK, PTFE, ceramic and glass.

Instructions for Use / Installation Information - Ball Bearings

Installation Information

An incorrect assembly and disassembly can damage a ball bearing. Therefore, a suitable tool must always be used to assemble and disassemble ball bearings or roller bearings.
Ball bearings should not be assembled with a hammer, as this can deform the ball bearing. It is recommended using a suitable press. During pressing, the contact surface can be provided with lubricant to protect the surfaces and facilitate assembly.
It is best to use a bearing puller for disassembly.

Maintenance

The ball bearing in roller bearings should be inspected for damage during maintenance.
Before regreasing, a ball bearing should first be thoroughly cleaned.
Remaining contamination in the bearing can damage the ball bearing. As a rule, a ball bearing should not be completely filled with grease, as this can cause the bearing to heat up too much and can cause it to fail.
For encapsulated and sealed ball bearings, it is recommended to replace the bearing. Maintenance is not recommended due to the risk of damage to the cover place or seal.

Supplementary Article

Bearing Lock Nuts

Shaft nuts - lock nuts - steel shaft nut - stainless steel shaft nut - shaft with retaining nut - shaftnNut with clamp screw - shaft nut with grub screw - shaft assembly

Bearings with Housing

Bearing with housing - bearing housing - bearing units - ball bearing holder - ball bearing with housing - bearing housing with flange - shaft holder with ball bearing

Axles / Rotary Shafts

Rotary axis - offset rotary shaft - double offset shaft - female threaded shaft - keyway shaft

Drive shafts

Motor shaft - torsion shaft - shaft with collar - shaft with shoulder - offset shaft - keyway shaft

Plain Bearing (Bushes)

Plain bearing - maintenance free - plain bearing bushings - plain bearing bushing with collar - plain bearing bushing with flange - plastic bushing - plastic plain bearing bushing

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
HHB6000ZZ

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
	11.72 €	1		5 Days	10	10	26	8	3900	31000	1570

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Specification Tables - Ball Bearings

Part Number	d	D	B	r (min)	Basic Load Rating		Allowable Rotational Speed rpm (Reference)	Relative Dimensions			Mass (g) (Reference)	Unit Price
Part Number	d	D	B	r (min)	Cr (Dynamic) N	Cor (Static) N	Allowable Rotational Speed rpm (Reference)	Ds (min)	dh (max)	R (max)	Mass (g) (Reference)	Unit Price
HHB695ZZ	5	13	4	0.2	915	346	43000	6.6	11.4	0.2	2.4
HHB605ZZ		14	5	0.2	1130	406	40000	6.6	12.4	0.2	3.5
HHB625ZZ		16		0.3	1470	540	36000	7	14	0.3	4.8
HHB696ZZ	6	15		0.2	1139	418	40000	7.6	13.4	0.2	3.8
HHB606ZZ		17	6	0.3	1924	677	38000	8	15	0.3	6.0
HHB626ZZ		19			1986	717	32000	8	17		8.1
HHB698ZZ	8	19			1901	734	36000	10	17		7.3
HHB608ZZ		22	7		2799	1103	34000		20		12
HHB628ZZ		24	8		2833	1138	28000		22		17

Part Number	d	D	B	r (min)	Basic Load Rating		Allowable Rotational Speed rpm (Reference)	Relative Dimensions				Mass (g) (Reference)	Unit Price
					Cr (Dynamic) kN	Cor (Static) kN		Ds		dh (max)	R (max)
					Cr (Dynamic) kN	Cor (Static) kN		(min)	(max)	dh (max)	R (max)
HHB6900ZZ	10	22	6	0.3	2.29	1.01	34000	12	12.5	20	0.3	10
HHB6000ZZ		26	8	0.3	3.90	1.57	31000	12	13	24	0.3	19
HHB6200ZZ		30	9	0.6	4.35	1.91	24000	14	16	26	0.6	32
HHB6901ZZ	12	24	6	0.3	2.45	1.16	31000		14.5	22	0.3	11
HHB6001ZZ		28	8	0.3	4.35	1.89	27000		15.5	26	0.3	22
HHB6201ZZ		32	10	0.6	5.80	2.44	22000	16	17	28	0.6	37
HHB6902ZZ	15	28	7	0.3	3.70	1.80	26000	17	17	26	0.3	17
HHB6002ZZ		32	9	0.3	4.75	2.26	23000	17	19	30	0.3	30
HHB6202ZZ		35	11	0.6	6.50	3.00	20000	19	20.5	31	0.6	45
HHB6903ZZ	17	30	7	0.3	3.90	2.04	23000		19.5	28	0.3	18
HHB6003ZZ		35	10	0.3	5.10	2.60	21000		21.5	33	0.3	39
HHB6203ZZ		40	12	0.6	8.15	3.84	17000	21	23.5	36	0.6	65
HHB6904ZZ	20	37	9	0.3	5.40	2.96	19000	22	24	35	0.3	36
HHB6004ZZ		42	12	0.6	7.95	4.00	17000	24	25.5	38	0.6	69
HHB6204ZZ		47	14	1.0	10.90	5.28	15000	25	26.5	42	1.0	106

kgf=Nx0.101972

More Information

Grease Performance and Operating Environment

		All-Purpose Grease Filled	Heat-Resistant Grease Filled
		B6□□□ZZ SB6□□□ZZ	HHB6□□ZZ HHB6□□□ZZ
Grease Performance	Thickener	Lithium Soap	Diurea
	Base Oil	Mineral Oil	Mineral Oil
	Base Oil Dynamic Viscosity (40°C,mm²/s)	26	88
	Worked Penetration	270	260
	Dropping Point (°C)	170~190	253
	Evaporation (wt%)	0.32 (99°Cx22h)	0.3 (99°Cx22h)
	Separation (100°Cx24h,wt%)	2.9	1.5
Operating Temperature (°C)	In Air	-25~+120	-20~+160
Operating Temperature (°C)	In Vacuum	Unsuitable	Unsuitable

Products homepage

Basic information

Bearing Ring Shape	Ball	Materials of Inner and Outer Ring	EN 1.4125 Equiv.	Shield material and shape	Double Shielded
Outer Ring Type	Flat	Accuracy (JIS)	Class 0	Specifications/Environment	Standard / Heat Resistance
Load Direction	Radial	Number of Bearing Ring Rows	Single Track	Size Standard	Metric Series
Rolling Element Material	EN 1.4125 Equiv.	Seal Part Structure	Double Shielded

This page is Deep groove ball bearings / single row / ZZ / heat resistant, max. 160°C / MISUMI, part number HHB6000ZZ.
You can find the detail information about specifications and dimensions on part number HHB6000ZZ.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- HHB6000ZZ
- HHB6001ZZ
- HHB6002ZZ
- HHB6003ZZ
- HHB6004ZZ
- HHB605ZZ
- HHB606ZZ
- HHB608ZZ
- HHB6200ZZ
- HHB6201ZZ
- HHB6202ZZ
- HHB6203ZZ
- HHB6204ZZ
- HHB625ZZ
- HHB626ZZ
- HHB628ZZ
- HHB6900ZZ
- HHB6901ZZ
- HHB6902ZZ
- HHB6903ZZ
- HHB6904ZZ
- HHB695ZZ
- HHB696ZZ
- HHB698ZZ
Clear
I.D. d(φ)
5

6

8

10

12

15

17

20
Clear
O.D. D(φ)
13

14

15

16

17

19

22

24

26

28

30

32

35

37

40

42

47
Clear
Width B (or T)(mm)
4

5

6

7

8

9

10

11

12

14
Clear
Basic Load Rating Cr (Dynamic)(N)
915

1130

1139

1470

1901

1924

1986

2290

2450

2799

2833

3700

3900

4350

4750

5100

5400

5800

6500

7950

8150

10900
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
HHB6001ZZ
HHB6002ZZ
HHB6003ZZ
HHB6004ZZ
HHB605ZZ
HHB606ZZ

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
12.80 €	1	5 Days	10	12	28	8	4350	27000	1890
14.60 €	1	5 Days	10	15	32	9	4750	23000	2260
19.15 €	1	5 Days	10	17	35	10	5100	21000	2600
22.37 €	1	5 Days	10	20	42	12	7950	17000	4000
7.06 €	1	5 Days	10	5	14	5	1130	40000	406
7.91 €	1	Same day Stock	10	6	17	6	1924	38000	677