Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number | - | Feed Position | - | Feeding Method | - | Clamp Type | - | Grease |
FSXYR40 | - | C | - | F | - | S | - | R |
Part Number | Stage Used | ||
Type | Axis | Guide | |
FS | X | R | XSG (P.1921) |
C | XPG (P.1918) | ||
XY | R | XYSG (P.1946) | |
Z | R | ZSG (P.1966) |
Stage | Feed Position | Feeding Method | Clamp Type | Grease | ||||||||
Axis | Type | Size | Unit Price | Center/Side | Micrometer Head (Stroke: mm) | Price | Feed Screw (Pitch/Stroke: mm) | Price | Selection | Price | Selection | Price |
X-Axis | FSXR (Linear Ball) | 25 | (Center): A, AR : AZ, AZR (Side) : C, CR : CZ, CZR | N (Standard ±3.2) | N: M: D: | F (Hex Socket 0.5/±3.2) B (Feed Screw 0.5/±3.2) | F, B, J: | S (Standard) | S: H: P: | G (Standard) R (Clean Env. Compatible)*2 | G: R: | |
40 | N (Standard ±6.5) M (Coarse Fine Feed ±6.5) | F (Hex Socket 0.5/±6.5) B (Feed Screw 0.5/±6.5) J (Feed Screw 1.0/±6.5) | S (Standard) H (Disc) P (Opposed) Applicable only when C and CR, and the feed type is N or F. | |||||||||
50 | ||||||||||||
60 | ||||||||||||
70 | ||||||||||||
80 | N (Standard ±12.5) M (Coarse Fine Feed ±6.5) D (Digital Micrometer ±12.5) *1. Only applicable to feed position A ,AR and C. | S (Standard) H (Disc) | ||||||||||
FSXC (Cross Roller) | 25 | (Center): A, AR : AZ (Side) : C, CR : CZ *3 | N (Standard ±3.2) | N: M: | B (Feed Screw 0.5/±3.2) | B: | S (Standard) | S: | G (Standard) | G: R: | ||
40 | N (Standard ±6.5) M (Coarse Fine Feed ±6.5) | |||||||||||
60 | ||||||||||||
80 | N (Standard ±12.5) M (Coarse Fine Feed ±6.5) | |||||||||||
XY-Axis | FSXYR (Linear Ball) | 25 | (Center): A, AR (Side) : C, CR | N (Standard ±3.2) | N: M: D: | F (Hex Socket 0.5/±3.2) B (Feed Screw 0.5/±3.2) | F, B, J: | S (Standard) | S: H: P: | G (Standard) R (Clean Env. Compatible)*2 | G: R: | |
40 | N (Standard ±6.5) M (Coarse Fine Feed ±6.5) | F (Hex Socket 0.5/±6.5) B (Feed Screw 0.5/±6.5) J (Feed Screw 1.0/±6.5) | S (Standard) H (Disc) Only applicable to C, CR. P (Opposed) Applicable only when C and CR, and the feed type is N or F. | |||||||||
50 | ||||||||||||
60 | ||||||||||||
70 | ||||||||||||
80 | N (Standard ±12.5) M (Coarse Fine Feed ±6.5) D (Digital Micrometer ±12.5) *1. Only applicable to feed position A and AR. | S (Standard) H (Disc) Only applicable to C, CR. | ||||||||||
Z-Axis | FSZR (Linear Ball) | 25 | (Center) : AZ, AZR (Side) : C, CR : CZ, CZR Feeding direction of C, CR is upward; that of the others is downwards. | N (Standard ±3.2) | N: M: | F (Hex Socket 0.5/±3.2) B (Feed Screw 0.5/±3.2) | F, B, J: | S (Standard) | S: H: P: | G (Standard) R (Clean Env. Compatible)*2 | G: R: | |
40 | N (Standard ±6.5) M (Coarse Fine Feed ±6.5) Not applicable to C, CR. | F (Hex Socket 0.5/±6.5) B (Feed Screw 0.5/±6.5) J (Feed Screw 1.0/±6.5) | S (Standard) H (Disc) P (Opposed) Applicable only when C and CR, and the feed type is N or F. | |||||||||
50 | ||||||||||||
60 | ||||||||||||
70 | ||||||||||||
80 | N (Standard ±12.5) M (Coarse Fine Feed ±6.5) Not applicable to C, CR. | S (Standard) H (Disc) |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
FSXYR25-A-[B,F,N]-S-[G,R] |
FSXYR25-AR-[B,F,N]-S-[G,R] |
FSXYR25-C-[B,F,N]-S-[G,R] |
FSXYR25-CR-[B,F,N]-S-[G,R] |
Part Number | Minimum order quantity | Volume Discount | RoHS | Table Size (Length) L (Range Selectable) (mm) | Table Size (Width) W (Range Selectable) (mm) | Load Capacity (Range Selectable) (N) | Stroke (Distance along X-Axis) (Range Selectable) (mm) | Stroke (Distance along Y-Axis) (Range Selectable) (mm) | Table Material | Table Surface Treatment | Guiding Mechanism | Table Size (Thickness) H (Range Selectable) (mm) | Table Size (Length) L (mm) | Table Size (Width) W (mm) | Horizontal Load Capacity (N) | Stroke (X Distance) (mm) | Stroke (Y Distance) (mm) | Table Size (Thickness) H (mm) | Stroke (Z Distance) (mm) | Table Parallelism (µm) | Moment Rigidity (Pitching) ("/N•cm) | Moment Rigidity (Yawing) ("/N•cm) | Moment Rigidity (Rolling) ("/N•cm) | Feed Knob Position | Reversed | Grease Selection | Clamp Method Selection | Feeding Method Selection | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 9 Days | 10 | ≤ 25 | ≤ 25 | 30.1 to 50 | Up to ±10mm | Up to ±10mm | [Stainless Steel] EN 1.4125 Equiv. | Electroless Nickel Plating | Linear Ball | 20.1-25 | 25 | 25 | 38.2 | ±3.2 | ±3.2 | 24 | - | 30 | 3 | 2.2 | 3.00 | Center | Standard | G (Standard) / R (For Clean Environment) | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | ||
1 | 9 Days | 10 | ≤ 25 | ≤ 25 | 30.1 to 50 | Up to ±10mm | Up to ±10mm | [Stainless Steel] EN 1.4125 Equiv. | Electroless Nickel Plating | Linear Ball | 20.1-25 | 25 | 25 | 38.2 | ±3.2 | ±3.2 | 24 | - | 30 | 3 | 2.2 | 3.00 | Center | Right and Left | G (Standard) / R (For Clean Environment) | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | ||
1 | 9 Days | 10 | ≤ 25 | ≤ 25 | 30.1 to 50 | Up to ±10mm | Up to ±10mm | [Stainless Steel] EN 1.4125 Equiv. | Electroless Nickel Plating | Linear Ball | 20.1-25 | 25 | 25 | 38.2 | ±3.2 | ±3.2 | 24 | - | 30 | 3 | 2.2 | 3.00 | Side | Standard | G (Standard) / R (For Clean Environment) | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | ||
1 | 9 Days | 10 | ≤ 25 | ≤ 25 | 30.1 to 50 | Up to ±10mm | Up to ±10mm | [Stainless Steel] EN 1.4125 Equiv. | Electroless Nickel Plating | Linear Ball | 20.1-25 | 25 | 25 | 38.2 | ±3.2 | ±3.2 | 24 | - | 30 | 3 | 2.2 | 3.00 | Side | Right and Left | G (Standard) / R (For Clean Environment) | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] |
Loading...
Through Hole (Table Center Hole) | Not Provided |
---|
Configure
Basic Attributes
Table Size (Length) L (Range Selectable)(mm)
Table Size (Width) W (Range Selectable)(mm)
Load Capacity (Range Selectable)(N)
Stroke (Distance along X-Axis) (Range Selectable)(mm)
Stroke (Distance along Y-Axis) (Range Selectable)(mm)
Table Material
Table Surface Treatment
Guiding Mechanism
Table Size (Length) L(mm)
Table Size (Width) W(mm)
Horizontal Load Capacity(N)
Stroke (X Distance)(mm)
Stroke (Y Distance)(mm)
Table Size (Thickness) H(mm)
Stroke (Z Distance)(mm)
Feed Knob Position
Reversed
Grease Selection
Clamp Method Selection
Feeding Method Selection
Type
Table Size (Thickness) H (Range Selectable)(mm)
Filter by CAD data type
Filter by standard shipping days
Optional Attributes