Round rod spacers / stainless steel, steel / Treatment selectable / external thread, internal thread / Wrench flat

View the FAQ (3)

MISUMI

Order quantities extended (D-JIT)

(i)Remark

The area around the wrench flats may become glossy due to deburring (buffing).

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Dimensional Drawing

● L Dimension Selectable

● L Dimension Configurable

● Thread Dia. Configurable

● L Dimension Configurable, Wrench Flats

● Thread Dia. Configurable, Wrench Flats

■L Dimension Tolerance

L Dimension	L Dimension Tolerance
15 ≤ L ≤ 300	±0.1
300 < L ≤ 600	±0.3
600 < L ≤ 1000	±0.4

[ ! ]The dimension tolerance for L, S, SC, ℓ₁ conforms to JIS B 0405 Class m.

■Relief Dimension of Threaded Post (Reference values)

M	MC	g
2	1.5	0.8
2.6	2.1	0.8
3	2.4	1
4	3.2	1.2
5	4.1	1.5
6	4.4	2
8	6	3
10	7.7	3
12	9.4	4
16	13	4
20	16.4	5
24	19.6
27	23
30	25

* C0.2 to 0.5 at the corner
[ ! ] Trivalent Chromate (Black), Clear/Black Anodize may not always be fully deposited on threaded studs or internal tapped threads.
* D tolerance of trivalent chromate (black) is ±0.05.
[ ! ] Due to the thickness of the plating, the threaded studs of Trivalent Chromate (black) products may not pass through the ring gauge, but they can be used in general-purpose threaded holes (formerly JIS Class 2).
[ ! ] SC ≤ L - ℓ₁
[ ! ] Tapping may cause slight swelling of D dimension.
[ ! ]Anti-rust Oil is applied on SS400 equivalent products.
[ ! ] The area around the wrench flats may become glossy due to deburring (buffing).

Type					[M] Material	[S] Surface Treatment
L Dimension Selectable	L Dimension Configurable
L Dimension Selectable	Standard	Wrench Flats	Thread Dia. Configurable	Thread Dia. Configurable, Wrench Flats
—	NETGRF	NETGRS	NETG	NETGS	EN 1.0038 Equiv.	—
ETKGR	ETKGRF	ETKGRS	ETKG	ETKGS		Black Oxide
PETGR	PETGRF	PETGRS	PETG	PETGS		Electroless Nickel Plating
—	BETGRF	BETGRS	BETG	BETGS		Trivalent Chromate (Black)
SETGR	SETGRF	SETGRS	SETG	SETGS	EN 1.4301 Equiv.	—
—	AETGRF	AETGRS	AETG	AETGS	EN AW-2017-T4 Equiv.	Clear Anodize
—	ABETGRF	ABETGRS	ABETG	ABETGS	EN AW-2017-T4 Equiv.	Black Anodize

Recommended Tightening Torque for threaded stud (N⋅m)
(Reference Value)

	Aluminum	EN 1.0038 Equiv.·EN 1.4301 Equiv.
M	Recommended torque	Recommended torque
M	(0.5T series)	(T series)
3	0.315	0.63
4	0.75	1.5
5	1.5	3
6	2.6	5.2
8	6.2	13
10	12.2	25
12	21	42
16	53	106

[!] The effective number of threads is 3 or more.

Specification Table

Part Number	—	L	—	SC	—	M	—	N
ETKGR10 ETKGRF6 ETKG12 ETKGS20	— — — —	150 32 250 400	—	SC100	— —	M6 M8	— —	N8 N10

■L Dimension Selectable

Part Number		L Selection																			M (Coarse)	S	W	ℓ₁
Type	D	L Selection																			M (Coarse)	S	W	ℓ₁
EN 1.0038 Equiv. ETKGR PETGR EN 1.4301 Equiv. SETGR	6	15	20	25	30	35	40	45	50												3	3.5	5	8
	8		20	25	30	35	40	45	50	60	70	80	90	100	110	120	130	140	150		4	6	7
	10		20	25	30	35	40	45	50	60	70	80	90	100	110	120	130	140	150	200	5	6	8
	12			25	30	35	40	45	50	60	70	80	90	100	110	120	130	140	150	200	6	7.5	10	10
	15				30	35	40	45	50	60	70	80	90	100	110	120	130	140	150	200	8	10	13
	20						40	45	50	60	70	80	90	100	110	120	130	140	150	200	10	15	17

■L Dimension Configurable / L Dimension Configurable, Wrench Flats

Part Number			L 0.1 mm Increments * D = 5, 35, 40, 50 is 0.5 mm increments	SC 0.5 mm Increments [ ! ] For Wrench Flats Type only	M (Coarse)	W	ℓ₁
Type		D		SC 0.5 mm Increments [ ! ] For Wrench Flats Type only	M (Coarse)	W	ℓ₁
L Dimension Configurable EN 1.0038 Equiv. NETGRF ETKGRF PETGRF BETGRF (D ≤ 30) EN 1.4301 Equiv. SETGRF (D ≤ 30) EN AW−2017 Equiv. AETGRF (6 ≤ D ≤ 20) ABETGRF (6 ≤ D ≤ 20,Y ≤ 500)	L Dimension Configurable, Wrench Flats EN 1.0038 Equiv. NETGRS ETKGRS PETGRS BETGRS (D ≤ 30) EN 1.4301 Equiv. SETGRS (D ≤ 30) EN AW−2017 Equiv. AETGRS (6 ≤ D ≤ 20) ABETGRS (6 ≤ D ≤ 20,Y ≤ 500)	* 5	15.0 to 100.0	0 to 92.0	2.6	4	8
		6	15.0 to 290.0	0 to 282.0	3	5
		8	20.0 to 390.0	0 to 382.0	4	7
		10	20.0 to 580.0 (492.5)	0 to 572.0 (484.5)	5	8
		12	25.0 to 680.0 (491.0)	0 to 670.0 (481.0)	6	10	10
		15	30.0 to 780.0 (488.0)	0 to 770.0 (478.0)	8	13
		20	35.0 to 770.0 (485.0)	0 to 760.0 (475.0)	10	17
		25	45.0 to 870.0	0 to 860.0	12	22
		30	55.0 to 960.0	0 to 945.0	16	27	15
		* 35	55.0 to 900.0	0 to 885.0	16	30	15
		* 40	65.0 to 1000.0	0 to 980.0	20	36	20
		* 50	80.0 to 1000.0	0 to 980.0	24	41	20

[!] The overall length (Y) of Black Anodize is up to 500. The () in L and SC dimensions is applicable to Black Anodize.

■Thread Dia. Configurable / Thread Dia. Configurable, Wrench Flats

Part Number			L 0.1 mm Increments * D = 5, 35, 40, 50 is 0.5 mm increments	SC 0.5 mm Increments [ ! ] For Wrench Flats Type only	M (Coarse) Selection											N (Coarse) Selection											W	ℓ₁
Type		D		SC 0.5 mm Increments [ ! ] For Wrench Flats Type only	M (Coarse) Selection											N (Coarse) Selection											W	ℓ₁
Thread Dia. Configurable EN 1.0038 Equiv. NETG ETKG PETG BETG(D ≤ 30) EN 1.4301 Equiv. SETG (D ≤ 30) EN AW−2017 Equiv. AETG (6 ≤ D ≤ 20) ABETG (6 ≤ D ≤ 20,Y ≤ 500)	Thread Dia. Configurable, Wrench Flats EN 1.0038 Equiv. NETGS ETKGS PETGS BETGS (D ≤ 30) EN 1.4301 Equiv. SETGS (D ≤ 30) EN AW−2017 Equiv. AETGS (6 ≤ D ≤ 20) ABETGS (6 ≤ D ≤ 20,Y ≤ 500)	* 5	15.0 to 100.0	0 to 92.0	2.6	3	4									2.6	3										4	8
		6	15.0 to 290.0	0 to 282.0		3	4	5									3	4									5
		8	20.0 to 390.0	0 to 382.0		3	4	5	6								3	4	5								7
		10	20.0 to 580.0 (495.5)	0 to 572.0 (487.5)		3	4	5	6	8							3	4	5	6							8
		12	25.0 to 680.0 (494.0)	0 to 670.0 (484.0)			4	5	6	8	10							4	5	6	8						10	10
		15	30.0 to 780.0 (492.5)	0 to 770.0 (482.5)				5	6	8	10	12							5	6	8	10					13
		20	40.0 to 770.0 (492.5)	0 to 760.0 (482.5)				5	6	8	10	12	16						5	6	8	10	12				17
		25	55.0 to 870.0	0 to 860.0				5	6	8	10	12	16	20					5	6	8	10	12	16			22
		30	65.0 to 960.0	0 to 945.0				5	6	8	10	12	16	20	24				5	6	8	10	12	16	20		27	15
		* 35	80.0 to 900.0	0 to 885.0					6	8	10	12	16	20	24					6	8	10	12	16	20	24	30	15
		* 40	80.0 to 1000.0	0 to 980.0						8	10	12	16	20	24						8	10	12	16	20	24	36	20
		* 50	80.0 to 1000.0	0 to 980.0							10	12	16	20	24							10	12	16	20	24	41	20

[!] When L - SC ≤ N × 3, W - N ≥ 2 is required. [!] L ≥ N × 3 + 2 [!] The overall length (Y) of Black Anodize is up to 500. The () in L and SC dimensions is applicable to Black Anodize.

Alterations

Part Number	—	L	—	SC	—	M	—	N	—	(LKC·MLC·HL)
ETKGRF10 ETKG12 ETKGS20	— — —	150 250.3 400	—	SC100	— —	M6 M8	— —	N8 ND10	— — —	MLC7.0 LKC LKC	− HL10

Alterations

L Dimension Tolerance

Overall Length (L Dimension) Accuracy Revised

Effective Tapped Length

Threaded Length

Through Hole for Hex Wrench

Code

LKC

LVC

MLC

Spec.

L Dimension tolerances are as follows:
Ordering Code LKC
By specifying LKC, L dim. can be configured in 0.1 mm increments.

L Dimension	L Dimension Tolerance
8 ≤ L ≤ 300	±0.05
300 < L ≤ 600	±0.10
600 < L ≤ 1000	±0.15

[NG] Not Applicable to L Dimension Selectable Type

When ordering multiple items, the variation in each L dimension
will be made within ±0.02 mm.
Ordering Code LVC
[!]Applicable when L ≤ 200 and orders per line item is 20 pcs. or less
　　　
[ NG ]Not applicable to L Dimension Selectable, Black Anodize

Changes the effective length of tapped part to J x 3.
Ordering Code ND6
(N is changed to ND)
[ ! ]ND × 4+2 ≤ L
[ ! ] Applicable to Thread Dia. Configurable Type only
[NG] Not applicable when N2.6

Threaded Length
[NG] Not applicable when D = 5
[ ! ] MLC = 0.1 mm Increments
　　M × 1 ≤ MLC < M × 1.5
Ordering Code MLC10
[ ! ] Not Applicable to L Dimension Selectable Type

HL = 1 mm Increments
Ordering Code HL10
[!] d/2 + 5 ≤ HL ≤ L－ (d/2 + 5)
[ ! ] Applicable when 8 ≤ D ≤ 30 only

D	d	Hex Wrench Width	D	d	Hex Wrench Width
8	2.5	2	20	5.8	5
10	3	2.5	25	6.9	6
12	3.5	3	30	9.2	8
15	4.6	4

[ ! ]
When this Alteration is specified in combination with SC, a through hole is machined in perpendicular to the SC part.
[NG] Not Applicable to L Dimension Selectable Type

General Information - Hexagonal Rods

Spacer product assortment - square spacer - round spacer bolt - plastic spacer - hexagonal spacer - hexagonal spacer with centering pin

Selection details of spacers/spacers (hexagonal, square, cylindrical)

- Material: aluminum, steel, stainless steel, PMMA, PEEK

- Coatings: uncoated, burnished, chemically nickel-plated, anodized, chromated

- Basic shapes: hexagon, square, round

- End forms: straight, female thread, male thread, female thread with centering pin

- Outer diameter (round): 4 to 50 mm

- Spanner flat (hexagon, square): 4 to 32 mm

- Length: 5 to 800 mm

- Threads: M2 to M24

Description/Basics

Spacers are generally used as spacing connections. Due to their diversity, the wide range of design concepts can be realized with spacer bolts and practically every application can be realized using the appropriate spacer bolt.
The design and assembly of thin plates makes it extremely difficult to work with counterbores or internal threads. Therefore, spacer bolts are often used on plates, sheet metal or printed circuit boards (PCB).

The selectable assembly threads, the individually configurable length of the spacers, and the selectable length tolerance via the [LKC] option offer great design freedom compared to conventional mass-produced products. This advantage is particularly important if, for example, plates of different thicknesses or particularly thin plates are utilized.
For applications with particularly high positioning requirements, it is recommended to combine shim rings with a spacer. These can be configured in thicknesses from 0.01 to 1 mm and integrated as an additional compensating element.

The assembly of hexagonal spacers is particularly easy with the hex, since they can be held against one another with an open-ended spanner. With round spacer bolts, this can be realized with a spanner flat. The spacer bolts are also available with one-sided or two-sided internal thread (long nut). For precise positioning of a spacer bolt with an internal thread or external thread, MISUMI also offers a centering pin in the ISO tolerance h7.
This variety enables virtually barrier-free assembly of the components to be joined with screws, internal threads and external threads or nuts.

Application Examples - Hexagonal Rods

Application example: spacer - spacer bolt with external thread on both sides - spacer with mounting plate

Application example: spacer bolt with external thread
(1) Spacer bolts with external thread on both sides, (2) mounting plate, (3) nut

Application example spacer - spacer with two-sided internal thread - spacer with mounting plate

Application example: spacer bolts with internal thread
(1) Spacer with internal thread on both sides, (2) mounting plate, (3) screw

Application example: spacer - spacer with internal thread and external thread - spacer with centering pin - spacer with mounting plate

Application example: spacer with tappet
(1) Distance bolts with centering pin, (2) mounting plate, (3) nut, (4) screw

Application example spacer - spacer with inner thread and external thread - spacer with mounting plate

Application example: threaded spacer pin
(1) spacer bolts with internal thread and external thread, (2) mounting plate, (3) nut, (4) screw

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
ABETG6-[15-290/0.1]-M[3,4,5]-N[3,4]
ABETG6-[15-290/0.1]-M[3,4,5]-ND[3,4]
ABETG8-[20-390/0.1]-M[3,4,5,6]-N[3,4,5]
ABETG8-[20-390/0.1]-M[3,4,5,6]-ND[3,4,5]
ABETG10-[20-495.5/0.1]-M[3,4,5,6,8]-N[3,4,5,6]
ABETG10-[20-495.5/0.1]-M[3,4,5,6,8]-ND[3,4,5,6]
ABETG12-[25-494/0.1]-M[4,5,6,8,10]-N[4,5,6,8]
ABETG12-[25-494/0.1]-M[4,5,6,8,10]-ND[4,5,6,8]
ABETG15-[30-492.5/0.1]-M[5,6,8,10,12]-N[5,6,8,10]
ABETG15-[30-492.5/0.1]-M[5,6,8,10,12]-ND[5,6,8,10]
ABETG20-[40-492.5/0.1]-M[5,6,8,10,12,16]-N[5,6,8,10,12]
ABETG20-[40-492.5/0.1]-M[5,6,8,10,12,16]-ND[5,6,8,10,12]
ABETGRF6-[15-290/0.1]
ABETGRF8-[20-390/0.1]
ABETGRF10-[20-492.5/0.1]
ABETGRF12-[25-491/0.1]
ABETGRF15-[30-488/0.1]
ABETGRF20-[35-485/0.1]
ABETGRS6-[15-290/0.1]-SC[0-292/0.5]
ABETGRS8-[20-390/0.1]-SC[0-392/0.5]
ABETGRS10-[20-492.5/0.1]-SC[0-484.5/0.5]
ABETGRS12-[25-491/0.1]-SC[0-481/0.5]
ABETGRS15-[30-488/0.1]-SC[0-478/0.5]
ABETGRS20-[35-485/0.1]-SC[0-475/0.5]
ABETGS6-[15-290/0.1]-SC[0-292/0.5]-M[3,4,5]-N[3,4]
ABETGS6-[15-290/0.1]-SC[0-292/0.5]-M[3,4,5]-ND[3,4]
ABETGS8-[20-390/0.1]-SC[0-392/0.5]-M[3,4,5,6]-N[3,4,5]
ABETGS8-[20-390/0.1]-SC[0-392/0.5]-M[3,4,5,6]-ND[3,4,5]
ABETGS10-[20-495.5/0.1]-SC[0-487.5/0.5]-M[3,4,5,6,8]-N[3,4,5,6]
ABETGS10-[20-495.5/0.1]-SC[0-487.5/0.5]-M[3,4,5,6,8]-ND[3,4,5,6]
ABETGS12-[25-494/0.1]-SC[0-484/0.5]-M[4,5,6,8,10]-N[4,5,6,8]
ABETGS12-[25-494/0.1]-SC[0-484/0.5]-M[4,5,6,8,10]-ND[4,5,6,8]
ABETGS15-[30-492.5/0.1]-SC[0-482.5/0.5]-M[5,6,8,10,12]-N[5,6,8,10]
ABETGS15-[30-492.5/0.1]-SC[0-482.5/0.5]-M[5,6,8,10,12]-ND[5,6,8,10]
ABETGS20-[40-492.5/0.1]-SC[0-482.5/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12]
ABETGS20-[40-492.5/0.1]-SC[0-482.5/0.5]-M[5,6,8,10,12,16]-ND[5,6,8,10,12]
AETG6-[15-290/0.1]-M[3,4,5]-N[3,4]
AETG6-[15-290/0.1]-M[3,4,5]-ND[3,4]
AETG8-[20-390/0.1]-M[3,4,5,6]-N[3,4,5]
AETG8-[20-390/0.1]-M[3,4,5,6]-ND[3,4,5]
AETG10-[20-580/0.1]-M[3,4,5,6,8]-N[3,4,5,6]
AETG10-[20-580/0.1]-M[3,4,5,6,8]-ND[3,4,5,6]
AETG12-[25-680/0.1]-M[4,5,6,8,10]-N[4,5,6,8]
AETG12-[25-680/0.1]-M[4,5,6,8,10]-ND[4,5,6,8]
AETG15-[30-780/0.1]-M[5,6,8,10,12]-N[5,6,8,10]
AETG15-[30-780/0.1]-M[5,6,8,10,12]-ND[5,6,8,10]
AETG20-[40-770/0.1]-M[5,6,8,10,12,16]-N[5,6,8,10,12]
AETG20-[40-770/0.1]-M[5,6,8,10,12,16]-ND[5,6,8,10,12]
AETGRF6-[15-290/0.1]
AETGRF8-[20-390/0.1]
AETGRF10-[20-580/0.1]
AETGRF12-[25-680/0.1]
AETGRF15-[30-780/0.1]
AETGRF20-[35-770/0.1]
AETGRS6-[15-290/0.1]-SC[0-292/0.5]
AETGRS8-[20-390/0.1]-SC[0-392/0.5]
AETGRS10-[20-580/0.1]-SC[0-592/0.5]
AETGRS12-[25-680/0.1]-SC[0-690/0.5]
AETGRS15-[30-780/0.1]-SC[0-790/0.5]
AETGRS20-[35-770/0.1]-SC[0-790/0.5]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Characteristics/Applications	O.D. D (φ)	Length L (mm)	Material Details	Material	Surface Treatment	Thread Dia. M (mm)	Screw Dia. N (mm)	Distance to Wrench Slot S [SC] (mm)	Dimension Specifying	Wrench Flats	Effective Tapped Length (Nominal Dia. × 3) [ND]
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 5	3 ～ 4	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 5	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	3 ～ 4
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 6	3 ～ 5	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 6	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	3 ～ 5
-	1	9 Days	-	Non-magnetic	10	20 ～ 495.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 8	3 ～ 6	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	10	20 ～ 495.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 8	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	3 ～ 6
-	1	9 Days	-	Non-magnetic	12	25 ～ 494	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	4 ～ 10	4 ～ 8	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	12	25 ～ 494	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	4 ～ 10	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	4 ～ 8
-	1	9 Days	-	Non-magnetic	15	30 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	5 ～ 12	5 ～ 10	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	15	30 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	5 ～ 12	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	5 ～ 10
-	1	9 Days	-	Non-magnetic	20	40 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	5 ～ 16	5 ～ 12	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	20	40 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	5 ～ 16	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	5 ～ 12
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	10	20 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	12	25 ～ 491	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	15	30 ～ 488	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	20	35 ～ 485	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	0 ～ 292	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	0 ～ 392	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	10	20 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	0 ～ 484.5	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	12	25 ～ 491	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	0 ～ 481	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	15	30 ～ 488	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	0 ～ 478	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	20	35 ～ 485	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	-	-	0 ～ 475	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 5	3 ～ 4	0 ～ 292	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 5	-	0 ～ 292	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	3 ～ 4
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 6	3 ～ 5	0 ～ 392	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 6	-	0 ～ 392	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	3 ～ 5
-	1	9 Days	-	Non-magnetic	10	20 ～ 495.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 8	3 ～ 6	0 ～ 487.5	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	10	20 ～ 495.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	3 ～ 8	-	0 ～ 487.5	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	3 ～ 6
-	1	9 Days	-	Non-magnetic	12	25 ～ 494	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	4 ～ 10	4 ～ 8	0 ～ 484	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	12	25 ～ 494	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	4 ～ 10	-	0 ～ 484	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	4 ～ 8
-	1	9 Days	-	Non-magnetic	15	30 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	5 ～ 12	5 ～ 10	0 ～ 482.5	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	15	30 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	5 ～ 12	-	0 ～ 482.5	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	5 ～ 10
-	1	9 Days	-	Non-magnetic	20	40 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	5 ～ 16	5 ～ 12	0 ～ 482.5	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	20	40 ～ 492.5	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Black Anodized Aluminum	5 ～ 16	-	0 ～ 482.5	L Dimension Configurable, Thread Dia. Configurable, Wrench Flats	Provided	5 ～ 12
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	3 ～ 5	3 ～ 4	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	3 ～ 5	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	3 ～ 4
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	3 ～ 6	3 ～ 5	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	3 ～ 6	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	3 ～ 5
-	1	9 Days	-	Non-magnetic	10	20 ～ 580	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	3 ～ 8	3 ～ 6	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	10	20 ～ 580	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	3 ～ 8	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	3 ～ 6
-	1	9 Days	-	Non-magnetic	12	25 ～ 680	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	4 ～ 10	4 ～ 8	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	12	25 ～ 680	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	4 ～ 10	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	4 ～ 8
-	1	9 Days	-	Non-magnetic	15	30 ～ 780	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	5 ～ 12	5 ～ 10	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	15	30 ～ 780	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	5 ～ 12	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	5 ～ 10
-	1	9 Days	-	Non-magnetic	20	40 ～ 770	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	5 ～ 16	5 ～ 12	-	L Dimension Configurable, Thread Dia. Configurable	N/A	-
-	1	9 Days	-	Non-magnetic	20	40 ～ 770	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	5 ～ 16	-	-	L Dimension Configurable, Thread Dia. Configurable	N/A	5 ～ 12
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	10	20 ～ 580	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	12	25 ～ 680	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	15	30 ～ 780	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	20	35 ～ 770	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	-	L Dimension Configurable Standard	N/A	-
-	1	9 Days	-	Non-magnetic	6	15 ～ 290	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	0 ～ 292	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	8	20 ～ 390	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	0 ～ 392	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	10	20 ～ 580	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	0 ～ 592	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	12	25 ～ 680	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	0 ～ 690	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	15	30 ～ 780	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	0 ～ 790	L Dimension Configurable, Wrench Flats	Provided	-
-	1	9 Days	-	Non-magnetic	20	35 ～ 770	EN AW2017-T4 Equiv.	[Aluminum] EN AW-2017-T4 Equiv.	Clear Anodized Aluminum	-	-	0 ～ 790	L Dimension Configurable, Wrench Flats	Provided	-

1
2
3
4
5
Next >>

Products homepage

Basic information

Environmentally friendly	RoHS Compliant (10 Substances)	Scale	W/o Scale	Pilot (Concave-Convex at End)	Not Provided
Gas vent hole	Not Provided	Type (New)	Circular	Shaft Single Shape (New Creation)	One End Threaded, One End Tapped

Configure

352Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Characteristics/Applications
- Corrosion Resistant / Chemical Resistant
- Non-magnetic
- Heat Resistance
- Not Applicable
Clear
O.D. D(φ)
5

6

8

10

12

15

20

25

30

35

40

50
Clear
Length L(mm)
200
[15-800/0.1mm Unit(s)][25-680/0.01mm Unit(s)][60-150/10mm Unit(s)][15-50/5mm Unit(s)][15-1000/0.5mm Unit(s)]
Clear
Material Details
EN AW2017-T4 Equiv.

EN 1.4301 Equiv.

EN 1.0038 Equiv.
Clear
Material
- Steel
  - EN 1.0038 Equiv.
- Stainless Steel
  - EN 1.4301 Equiv.
- Aluminum
  - EN AW-2017-T4 Equiv.
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Black Anodized Aluminum
- Clear Anodized Aluminum
- Trivalent Chromate (Black)
Clear
Thread Dia. M(mm)
2.6

3

4

5

6

8

10

12

16

20

24
Clear
Screw Dia. N(mm)
2.6

3

4

5

6

8

10

12

16

20

24
Clear
Distance to Wrench Slot S [SC](mm)
3.5

6

7.5

10

15
[0-790/0.5mm Unit(s)][0-980/1mm Unit(s)]
Clear
Dimension Specifying
- L Dimension Configurable Standard
- L Dimension Configurable, Thread Dia. Configurable
- L Dimension Configurable, Thread Dia. Configurable, Wrench Flats
- L Dimension Configurable, Wrench Flats
- L Dimension Selectable
Clear
Wrench Flats
- N/A
- Provided
Clear
Effective Tapped Length (Nominal Dia. × 3) [ND]
3

4

5

6

8

10

12

16

20
Clear
Type
- ABETG
- ABETGRF
- ABETGRS
- ABETGS
- AETG
- AETGRF
- AETGRS
- AETGS
- BETG
- BETGRF
- BETGRS
- BETGS
- ETKG
- ETKGR
- ETKGRF
- ETKGRS
- ETKGS
- NETG
- NETGRF
- NETGRS
- NETGS
- PETG
- PETGR
- PETGRF
- PETGRS
- PETGS
- SETG
- SETGR
- SETGRF
- SETGRS
- SETGS
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

4 Days or Less

6 Days or Less

9 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Do you also have hollow spacers?: Answer:
Spacers or spacer bolts are generally made of solid material. However, if a hollow spacer is required, MISUMI also offers spacer sleeves. These are configurable like the spacers and can be adapted to the required dimensions. For precise distance, we recommend selecting simultaneous grinding spacer sleeves.
Question:
Are the spacers stainless?: Answer:
The spacers and spacer bolts can be selected in stainless steel and in steel with surface coating. To select the coating, the spacers are available in burnished, chemically nickel-plated, clear anodized, chromated. Thus, depending on the application, the spacer bolts are protected against corrosion.
Question:
Do you have spacer bolts with an undercut?: Answer:
MISUMI offers an additional option [FC] the spacer bolts for an undercut. With this option, a cutout is added to the external thread of the spacer bolt. The dimensions of the cutout can be found in the overview as a PDF.