Air Manifold Block -T-Shaped Hole Type- (Part Numbers - CAD Download)

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Manifold Pneumatic/Outlets 3 Sides/No Inlets:Related Image

Type							Material	Surface Treatment	Max. Operating Pressure
Pitch (P) Standard				Pitch (P) Configurable
20 Sq.	25 Sq.	35 Sq.	50 Sq.	20 Sq.	25 Sq.	35 Sq.
BMGFC	BMGF	BMGFK	BMGFL	BMGFCP	BMGFP	BMGFKP	Aluminum Alloy 5000 series	-	1MPa≈10kgf/cm² or less
BMGFCA	BMGFA	-	BMGFLA	BMGFCAP	BMGFAP	-	Aluminum Alloy 5000 series	Clear Anodize	1MPa≈10kgf/cm² or less

Specifications

Part Number

Type

Mounting Hole Change

Number of
Circuits

BMGF
BMGFP
G-BMGFP

T
ZT
ZT

4
4
4

-
-
-

Q2
Q2
Q2

-
-
-

R5
R2
R2

-
-
-

S2
S2
S2

-
-

P50
P50

(G Thread)

Part Number				Rc (PT), NPT, M (Coarse) Selection	Pitch P		Number of Pitches N	Total Number of Q, R and S Threads	A	B	E	F	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	Q, R, S	Standard	Configurable 1mm Increment									M
(20 Sq.)		T (Tapped) YN (Side Through)	1	1 (1/8) M3 (M3) M4 (M4) 5 (M5)	-	-	0	3	20	20	20	10	5	4	M5
Pitch Standard BMGFC BMGFCA	Pitch Configurable BMGFCP BMGFCAP		2		15	15~50	1	6
			3				2	9
			4				3	12
			5				4	15
			6				5	18
			7			20~50	6	21
			8				7	24
(25 Sq.)		NA (Through) T (Tapped) ZT (Counterbore Tapped) YZ (Side Counterbore) YN (Side Through)	1	1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4)	-	-	0	3	25	25	20	12.5	7.5	7	M5
Pitch Standard BMGF BMGFA	Pitch Configurable BMGFP BMGFAP		2		30	20~50	1	6
			3				2	9
			4				3	12
			5				4	15
			6			25~50	5	18
			7				6	21
			8				7	24
(35 Sq.)			1	1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4)	-	-	0	3	35	35	20	17.5	7.5	7	M5
Pitch Standard BMGFK	Pitch Configurable BMGFKP		2		30	20~50	1	6
			3				2	9
			4				3	12
			5				4	15
			6			25~50	5	18
			7				6	21
			8				7	24
(50 Sq.)			1	2 (1/4) 3 (3/8) 4 (1/2)	-	-	0	3	50	50	25	25	8.5	8.5	M8
Pitch Standard BMGFL BMGFLA			2		40	-	1	6
			3				2	9
			4				3	12
			5				4	15
			6				5	18

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMGF) For ordering, see the Ordering Example.
For Q, R and S, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ).
Single Circuit is not available for Pitch Configurable Type.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except for 20 Sq. and 25 Sq.)
For Block Square 25□Type, when 1/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square□35 Type instead.
Select NA, T or ZT for the mounting hole shape of 7 and 8 Circuit Types .

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
BMGFAP8-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-P[25-50/1]
BMGFAP8-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-P[25-50/1]
BMGFAP8-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-P[25-50/1]
BMGFAP8-Q[1,2,5]-R[1,2,5]-S[1,2,5]-P[25-50/1]
BMGFAPNA2-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-P[20-50/1]
BMGFAPNA2-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-P[20-50/1]
BMGFAPNA2-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-P[20-50/1]
BMGFAPNA2-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-P[20-50/1]
BMGFAPNA2-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-P[20-50/1]
BMGFAPNA2-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-P[20-50/1]
BMGFAPNA2-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-P[20-50/1]
BMGFAPNA2-Q[1,2,5]-R[1,2,5]-S[1,2,5]-P[20-50/1]
BMGFAPNA3-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-P[20-50/1]
BMGFAPNA3-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-P[20-50/1]
BMGFAPNA3-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-P[20-50/1]
BMGFAPNA3-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-P[20-50/1]
BMGFAPNA3-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-P[20-50/1]
BMGFAPNA3-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-P[20-50/1]
BMGFAPNA3-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-P[20-50/1]
BMGFAPNA3-Q[1,2,5]-R[1,2,5]-S[1,2,5]-P[20-50/1]
BMGFAPNA4-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-P[20-50/1]
BMGFAPNA4-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-P[20-50/1]
BMGFAPNA4-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-P[20-50/1]
BMGFAPNA4-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-P[20-50/1]
BMGFAPNA4-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-P[20-50/1]
BMGFAPNA4-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-P[20-50/1]
BMGFAPNA4-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-P[20-50/1]
BMGFAPNA4-Q[1,2,5]-R[1,2,5]-S[1,2,5]-P[20-50/1]
BMGFAPNA5-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-P[20-50/1]
BMGFAPNA5-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-P[20-50/1]
BMGFAPNA5-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-P[20-50/1]
BMGFAPNA5-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-P[20-50/1]
BMGFAPNA5-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-P[20-50/1]
BMGFAPNA5-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-P[20-50/1]
BMGFAPNA5-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-P[20-50/1]
BMGFAPNA5-Q[1,2,5]-R[1,2,5]-S[1,2,5]-P[20-50/1]
BMGFAPNA6-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-P[25-50/1]
BMGFAPNA6-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-P[25-50/1]
BMGFAPNA6-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-P[25-50/1]
BMGFAPNA6-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-P[25-50/1]
BMGFAPNA6-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-P[25-50/1]
BMGFAPNA6-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-P[25-50/1]
BMGFAPNA6-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-P[25-50/1]
BMGFAPNA6-Q[1,2,5]-R[1,2,5]-S[1,2,5]-P[25-50/1]
BMGFAPNA7-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-P[25-50/1]
BMGFAPNA7-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-P[25-50/1]
BMGFAPNA7-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-P[25-50/1]
BMGFAPNA7-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-P[25-50/1]
BMGFAPNA7-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-P[25-50/1]
BMGFAPNA7-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-P[25-50/1]
BMGFAPNA7-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-P[25-50/1]
BMGFAPNA7-Q[1,2,5]-R[1,2,5]-S[1,2,5]-P[25-50/1]
BMGFAPNA8-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-P[25-50/1]
BMGFAPNA8-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-P[25-50/1]
BMGFAPNA8-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-P[25-50/1]
BMGFAPNA8-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-P[25-50/1]
BMGFAPNA8-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-P[25-50/1]
BMGFAPNA8-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-P[25-50/1]
BMGFAPNA8-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-P[25-50/1]
BMGFAPNA8-Q[1,2,5]-R[1,2,5]-S[1,2,5]-P[25-50/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Surface Treatment	Block Size (mm)	Number of Circuits (Circuits)	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Drawing Q Part Thread Dia. NPT Selection [Q]	Drawing R Part Thread Dia. NPT Selection [R]	Drawing S Part Thread Dia. NPT Selection [S]	Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4)	Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)	Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)	Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	25	Configurable Type	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	25	Configurable Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	-	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1	10 Days	10	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	25	Configurable Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5

Products homepage

Basic information

Shape	T-Shaped Hole	Material	EN AW-5052 Equiv.	Application	Pneumatic

Configure

1,172Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Block Size(mm)
- 20 x 20
- 25 x 25
- 35 x 35
- 50 x 50
Clear
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- Not Specified (Through)
- T (Tapped)
- YN (Side Through)
- YZ (Side Counterbore)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
15

25

30

40
[15-50/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
Clear
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
Clear
Drawing S Part Thread Dia. NPT Selection [S]
- 1/4 [S2N]
- 1/8 [S1N]
Clear
Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4)
3

4
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Type
- BMGF
- BMGFA
- BMGFAP
- BMGFC
- BMGFCA
- BMGFCAP
- BMGFCP
- BMGFK
- BMGFKP
- BMGFL
- BMGFLA
- BMGFP
- G-BMGF
- G-BMGFA
- G-BMGFAP
- G-BMGFC
- G-BMGFCA
- G-BMGFCAP
- G-BMGFCP
- G-BMGFK
- G-BMGFKP
- G-BMGFL
- G-BMGFLA
- G-BMGFP
Clear
Surface Treatment
- Not Provided
- Clear Anodized Aluminum
Clear
Filter by CAD data type
- 2D
- 3D
Clear