Manifold Hydraulic / Outlets on 3 Sides / 2 Inlets

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Manifold Hydraulic/Outlets on 3 Sides/2 Inlets:Related Image

Usage	Type							Material	Surface Treatment	Max. Operating Pressure
	Pitch (P) Standard					Pitch (P) Configurable
	40 Sq.	60 Sq.	25 Sq.	30x40 Sq.	50 Sq.	40 Sq.	60 Sq.
Hydraulic	BMTF	BMTFL	-	-	-	-	BMTFLP	EN 1.0038 Equiv.	Trivalent Chromate	20.6MPa≈210kgf/cm² or less
	BMTFM	-	-	-	-	BMTFMP	-	EN 1.0038 Equiv.	Electroless Nickel Plating
	BMTFR	BMTFLR	-	-	-	BMTFRP	-	EN 1.4301 Equiv.	-
	BMTFS	-	-	-	-	-	-	EN 1.4401 Equiv.	-
	BMTFC	-	-	-	-	-	-	Brass	-	1MPa≈10kgf/cm² or less
Pneumatic	-	-	BMTAC	BMTAF	BMTAL	-	-	Aluminum Alloy 5000 series	-
Pneumatic	-	-	-	BMTAFA	BMTALA	-	-	Aluminum Alloy 5000 series	Clear Anodize

BMTFLRP (EN 1.4301 Equiv., 60 Sq., Pitch Configurable) is available on our website.

Specifications

Part Number			-	Q	-	R	-	S	-	G	-	K	-	P

Type	Mounting Hole Change	Number of Circuits
BMTFMP BMTAC G-BMTAC	T T	2 3 3	- - -	Q1 QM3 QM3	- - -	R1 R1 R1	- - -	S1 S1 S1	- - -	G2 G1 G1	- - -	K2 K1 K1	-	P30	(G Thread)

Part Number				Rc (PT), NPT, M (Coarse) Selection		Pitch P		Number of Pitches N	Total Number of Q, R, S, G and K Threads	A	B	E	F	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	Q, R, S	G, K	Standard	Configurable 1mm Increment									M
Hydraulic (40 Sq.)		NA (Through) T (Tapped) ZT (Counterbore Tapped)	1	1 (1/8) 2 (1/4) 3 (3/8) 1N (NPT1/8) 2N (NPT1/4) 3N (NPT3/8)	2 (1/4) 3 (3/8) 4 (1/2) 2N (NPT1/4) 3N (NPT3/8) 4N (NPT1/2)	-	-	0	5	40	40	35	20	20	7	M6
Pitch Standard BMTF BMTFM BMTFR BMTFS BMTFC	Pitch Configurable BMTFMP BMTFRP		2			40	25~50	1	8
			3					2	11
			4					3	14
			5					4	17
			6				30~50	5	20
Hydraulic (60 Sq.)			1	2 (1/4) 3 (3/8) 4 (1/2) 6 (3/4)	2 (1/4) 3 (3/8) 4 (1/2) 6 (3/4)	-	-	0	5	60	60	30	30	7.5	8	M8
Pitch Standard BMTFL BMTFLR	Pitch Configurable BMTFLP		2			60	35~60	1	8
			3					2	11
			4					3	14
			5					4	17
			6				40~60	5	20
Pneumatic (25 Sq.)		T (Tapped)	1	1 (1/8) M3 (M3) M4 (M4) 5 (M5)	1 (1/8) M3 (M3) M4 (M4) 5 (M5)	-	-	0	5	25	25	20	12.5	10	4	M5
Pitch Standard BMTAC			2			15		1	8
			3					2	11
			4					3	14
			5					4	17
			6					5	20
Pneumatic (30x40 Sq.)		NA (Through) T (Tapped) ZT (Counterbore Tapped)	1	1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4)	1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4)	-	-	0	5	30	40	20	20	7.5	7	M5
Pitch Standard BMTAF BMTAFA			2			30		1	8
			3					2	11
			4					3	14
			5					4	17
			6					5	20
Pneumatic (50 Sq.)			1	2 (1/4) 3 (3/8) 4 (1/2)	2 (1/4) 3 (3/8) 4 (1/2)	-	-	0	5	50	50	25	25	8.5	8.5	M8
Pitch Standard BMTAL BMTALA			2			40		1	8
			3					2	11
			4					3	14
			5					4	17
			6					5	20

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMTF) For ordering, see the Ordering Example.
For Q, R, S, G and K, specify 1, 2, 3, 4, 5, 6, M3, M4, 1N, 2N, 3N or 4N indicated before ( ). Single Circuit is not available for Pitch Configurable Type.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. Only 6 Circuit Type has an additional mounting hole at the midpoint of the overall length. (Except for 25 Sq.)

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
BMTFLM1-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLM2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLM3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLM4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLM5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLM6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMNA1-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMNA2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMNA3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMNA4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMNA5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMNA6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMT1-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMT2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMT3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMT4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMT5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMT6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMZT1-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMZT2-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMZT3-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMZT4-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMZT5-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFLMZT6-Q[2,3,4,6]-R[2,3,4,6]-S[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMTFM1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMTFM1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-K[2,3,4]
BMTFM1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-G[2,3,4]-[K2N,K3N,K4N]
BMTFM1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-G[2,3,4]-K[2,3,4]
BMTFM1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMTFM1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]-[G2N,G3N,G4N]-K[2,3,4]
BMTFM1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]-G[2,3,4]-[K2N,K3N,K4N]
BMTFM1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]-G[2,3,4]-K[2,3,4]
BMTFM1-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMTFM1-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-K[2,3,4]
BMTFM1-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]-G[2,3,4]-[K2N,K3N,K4N]
BMTFM1-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]-G[2,3,4]-K[2,3,4]
BMTFM1-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMTFM1-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]-[G2N,G3N,G4N]-K[2,3,4]
BMTFM1-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]-G[2,3,4]-[K2N,K3N,K4N]
BMTFM1-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]-G[2,3,4]-K[2,3,4]
BMTFM1-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMTFM1-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-K[2,3,4]
BMTFM1-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-G[2,3,4]-[K2N,K3N,K4N]
BMTFM1-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-G[2,3,4]-K[2,3,4]
BMTFM1-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMTFM1-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]-[G2N,G3N,G4N]-K[2,3,4]
BMTFM1-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]-G[2,3,4]-[K2N,K3N,K4N]
BMTFM1-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]-G[2,3,4]-K[2,3,4]
BMTFM1-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMTFM1-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-K[2,3,4]
BMTFM1-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]-G[2,3,4]-[K2N,K3N,K4N]
BMTFM1-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]-G[2,3,4]-K[2,3,4]
BMTFM1-Q[1,2,3]-R[1,2,3]-S[1,2,3]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMTFM1-Q[1,2,3]-R[1,2,3]-S[1,2,3]-[G2N,G3N,G4N]-K[2,3,4]
BMTFM1-Q[1,2,3]-R[1,2,3]-S[1,2,3]-G[2,3,4]-[K2N,K3N,K4N]
BMTFM1-Q[1,2,3]-R[1,2,3]-S[1,2,3]-G[2,3,4]-K[2,3,4]
BMTFM2-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMTFM2-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-[G2N,G3N,G4N]-K[2,3,4]
BMTFM2-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-G[2,3,4]-[K2N,K3N,K4N]
BMTFM2-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]-G[2,3,4]-K[2,3,4]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shape	Material	Surface Treatment	Block Size (mm)	Number of Circuits (Circuits)	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Application	Drawing G Part Thread Dia. NPT Selection [G]	Drawing K Part Thread Dia. NPT Selection [K]	Drawing Q Part Thread Dia. NPT Selection [Q]	Drawing R Part Thread Dia. NPT Selection [R]	Drawing S Part Thread Dia. NPT Selection [S]	Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4)	Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)	Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)	Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)	Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)	Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	1	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	1	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	1	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	2	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	3	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	4	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	5	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	9 Days	10	Lateral Through Hole, T-Shaped Hole	EN 1.0038 Equiv.	Electroless Nickel Plating	60 x 60	6	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	-	-	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	2 ～ 4	-	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	-	-	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	2 ～ 4	-	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-	-	-	-	-	-	-	-	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-	-	-	-	-	2 ～ 4	-	-	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-	-	-	-	2 ～ 4	-	-	-	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-	-	-	-	2 ～ 4	2 ～ 4	-	-	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	-	-	1 ～ 3	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	2 ～ 4	-	1 ～ 3	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	-	-	1 ～ 3	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	2 ～ 4	-	1 ～ 3	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	-	-	-	-	-	-	-	-	1 ～ 3	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	-	-	-	-	-	-	2 ～ 4	-	1 ～ 3	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	-	-	-	-	-	2 ～ 4	-	-	1 ～ 3	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	-	1 ～ 3	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	-	1 ～ 3	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	2 ～ 4	1 ～ 3	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	-	1 ～ 3	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	2 ～ 4	1 ～ 3	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-	-	-	-	-	-	1 ～ 3	-	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-	-	-	-	-	2 ～ 4	1 ～ 3	-	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-	-	-	-	2 ～ 4	-	1 ～ 3	-	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-	-	-	-	2 ～ 4	2 ～ 4	1 ～ 3	-	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	-	1 ～ 3	1 ～ 3	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	-	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	2 ～ 4	1 ～ 3	1 ～ 3	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	-	1 ～ 3	1 ～ 3	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	2 ～ 4	1 ～ 3	1 ～ 3	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	-	-	-	-	-	-	-	-	-	1 ～ 3	1 ～ 3	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	-	-	-	-	-	-	-	-	-	2 ～ 4	1 ～ 3	1 ～ 3	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	-	-	-	-	-	-	-	2 ～ 4	-	1 ～ 3	1 ～ 3	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	1 ～ 3	1 ～ 3	1 ～ 3
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	-	-	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	-	2 ～ 4	-	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	-	-	-	-
-	1	10 Days	10	Lateral Through Hole, T-Shaped Hole	Steel for General Structure	Electroless Nickel Plating	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-	-	-	-	-	2 ～ 4	2 ～ 4	-	-	-

1
2
3
4
5
Next >>

Products homepage

Configure

1,532Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shape
- Blind Lateral Hole, L-Shaped Hole
- Lateral Through Hole, T-Shaped Hole
Clear
Material
- EN 1.0038 Equiv.
- EN 1.4301 Equiv.
- EN 1.4401 Equiv.
- Brass
- EN AW-5052 Equiv.
- Steel for General Structure
Clear
Block Size(mm)
- 25 x 25
- 30 x 40
- 40 x 40
- 50 x 50
- 60 x 60
- 70 x 70
Clear
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- T (Tapped)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
15

30

40

60
[25-50/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Application
- For Oil, Water Hydraulic
- For Water Hydraulic
- For hydraulic / Water Pressure
- Pneumatic
Clear
Drawing G Part Thread Dia. NPT Selection [G]
- 1/2 [G4N]
- 1/4 [G2N]
- 1/8 [G1N]
- 3/8 [G3N]
Clear
Drawing K Part Thread Dia. NPT Selection [K]
- 1/2 [K4N]
- 1/4 [K2N]
- 1/8 [K1N]
- 3/8 [K3N]
Clear
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
- 3/8 [Q3N]
Clear
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
- 3/8 [R3N]
Clear
Drawing S Part Thread Dia. NPT Selection [S]
- 1/4 [S2N]
- 1/8 [S1N]
- 3/8 [S3N]
Clear
Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4)
3

4
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)
1

2

3

4

5

6

8
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)
1

2

3

4

5

6

8
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)
1

2

3

4

5

6
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)
1

2

3

4

5

6
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)
1

2

3

4

5

6
Clear
Type
- BMTAC
- BMTAF
- BMTAFA
- BMTAL
- BMTALA
- BMTF
- BMTFC
- BMTFL
- BMTFLM
- BMTFLP
- BMTFLR
- BMTFM
- BMTFMP
- BMTFR
- BMTFRP
- BMTFS
- BMTLM
- G-BMTAC
- G-BMTAF
- G-BMTAFA
- G-BMTAL
- G-BMTALA
- G-BMTF
- G-BMTFC
- G-BMTFL
- G-BMTFLM
- G-BMTFLP
- G-BMTFLR
- G-BMTFM
- G-BMTFMP
- G-BMTFR
- G-BMTFRP
- G-BMTFS
- G-BMTLM
Clear
Surface Treatment
- Not Provided
- Trivalent Chromate
- Electroless Nickel Plating
- Clear Anodized Aluminum
Clear
Filter by CAD data type
- 2D
- 3D
Clear