Terminal Blocks / Pneumatic / Outlets 2 Sides / No Inlets

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Terminal Blocks/Pneumatic/Outlets 2 Sides/No Inlets:Related Image

Type									Material	Surface Treatment	Max. Operating Pressure
Pitch (P) Standard					Pitch (P) Configurable
15 Sq.	20 Sq.	25 Sq.	35 Sq.	50 Sq.	20 Sq.	25 Sq.	35 Sq.	50 Sq.
BTLAS	BTLAC	BTLA	BTLAK	BTLAL	BTLACP	BTLAP	BTLAKP	BTLALP	Aluminum Alloy 5000 series	-	1MPa≈10kgf/cm² or less
-	BTLACA	BTLAA	-	-	BTLACAP	BTLAAP	BTLAAKP	BTLALAP	Aluminum Alloy 5000 series	Clear Anodize	1MPa≈10kgf/cm² or less

Material of 15 Sq. is EN AW-6063 Equiv.

Specifications

Part Number			-	Q	-	R	-	P

Type	Mounting Hole Change	Number of Circuits
BTLS BTLSFLP BTLA BTLAP G-BTLAP	NA T ZT ZT	5 4 4 5 5	- - - - -	Q3 Q4 Q2 Q2 Q2	- - - - -	R2 R3 R1 R2 R2	- - -	P50 P50 P50	(G Thread)

Part Number				Rc (PT), NPT, M (Coarse) Selection	Pitch P		Number of Pitches N	Total Number of Q and R Threads	A	B	E	F	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	Q, R	Standard	Configurable 1mm Increment									M
(15 Sq.)		T (Tapped)	1	M3 (M3) M4 (M4) 5 (M5)	-	-	0	2	15	15	15	7.5	5	3.5	M4
Pitch Standard BTLAS			2		15		1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12
			7				6	14
			8				7	16
(20 Sq.)			1	1 (1/8) M3 (M3) M4 (M4) 5 (M5)	-	-	0	2	20	20	20	10	5	4	M5
Pitch Standard BTLAC BTLACA	Pitch Configurable BTLACP BTLACAP		2		15	15~50	1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12
			7				6	14
			8				7	16
(25 Sq.)		NA (Through) T (Tapped) ZT (Counterbore Tapped)	1	1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4)	-	-	0	2	25	25	20	12.5	7.5	7	M5
Pitch Standard BTLA BTLAA	Pitch Configurable BTLAP BTLAAP		2		25	20~60	1	4
			3				2	6
			4				3	8
			5				4	10
			6			25~60	5	12
			7				6	14
			8				7	16
(35 Sq.)			1	1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4)	-	-	0	2	35	35	20	17.5	7.5	7	M5
Pitch Standard BTLAK	Pitch Configurable BTLAKP BTLAAKP		2		25	20~60	1	4
			3				2	6
			4				3	8
			5				4	10
			6			25~60	5	12
			7				6	14
			8				7	16
(50 Sq.)			1	2 (1/4) 3 (3/8) 4 (1/2)	-	-	0	2	50	50	25	25	8.5	8.5	M8
Pitch Standard BTLAL	Pitch Configurable BTLALP BTLALAP		2		40	35~60	1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BTLA) For ordering, see the Ordering Example.
For Q and R, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ). Single Circuit is not available for Pitch Configurable Type.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. For mounting hole change of 15 Sq. and 20 Sq., only Tapped Hole is applicable.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except 15 and 20 Sq.)
For Block Square □25 Type, when 1/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square □35 Type instead.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
BTLAA1-[Q1N,Q2N]-[R1N,R2N]
BTLAA1-[Q1N,Q2N]-R[1,2,5]
BTLAA1-Q[1,2,5]-[R1N,R2N]
BTLAA1-Q[1,2,5]-R[1,2,5]
BTLAA2-[Q1N,Q2N]-[R1N,R2N]
BTLAA2-[Q1N,Q2N]-R[1,2,5]
BTLAA2-Q[1,2,5]-[R1N,R2N]
BTLAA2-Q[1,2,5]-R[1,2,5]
BTLAA3-[Q1N,Q2N]-[R1N,R2N]
BTLAA3-[Q1N,Q2N]-R[1,2,5]
BTLAA3-Q[1,2,5]-[R1N,R2N]
BTLAA3-Q[1,2,5]-R[1,2,5]
BTLAA4-[Q1N,Q2N]-[R1N,R2N]
BTLAA4-[Q1N,Q2N]-R[1,2,5]
BTLAA4-Q[1,2,5]-[R1N,R2N]
BTLAA4-Q[1,2,5]-R[1,2,5]
BTLAA5-[Q1N,Q2N]-[R1N,R2N]
BTLAA5-[Q1N,Q2N]-R[1,2,5]
BTLAA5-Q[1,2,5]-[R1N,R2N]
BTLAA5-Q[1,2,5]-R[1,2,5]
BTLAA6-[Q1N,Q2N]-[R1N,R2N]
BTLAA6-[Q1N,Q2N]-R[1,2,5]
BTLAA6-Q[1,2,5]-[R1N,R2N]
BTLAA6-Q[1,2,5]-R[1,2,5]
BTLAA7-[Q1N,Q2N]-[R1N,R2N]
BTLAA7-[Q1N,Q2N]-R[1,2,5]
BTLAA7-Q[1,2,5]-[R1N,R2N]
BTLAA7-Q[1,2,5]-R[1,2,5]
BTLAA8-[Q1N,Q2N]-[R1N,R2N]
BTLAA8-[Q1N,Q2N]-R[1,2,5]
BTLAA8-Q[1,2,5]-[R1N,R2N]
BTLAA8-Q[1,2,5]-R[1,2,5]
BTLAAKP2-[Q1N,Q2N]-[R1N,R2N]-P[20-60/1]
BTLAAKP2-[Q1N,Q2N]-R[1,2,5]-P[20-60/1]
BTLAAKP2-Q[1,2,5]-[R1N,R2N]-P[20-60/1]
BTLAAKP2-Q[1,2,5]-R[1,2,5]-P[20-60/1]
BTLAAKP3-[Q1N,Q2N]-[R1N,R2N]-P[20-60/1]
BTLAAKP3-[Q1N,Q2N]-R[1,2,5]-P[20-60/1]
BTLAAKP3-Q[1,2,5]-[R1N,R2N]-P[20-60/1]
BTLAAKP3-Q[1,2,5]-R[1,2,5]-P[20-60/1]
BTLAAKP4-[Q1N,Q2N]-[R1N,R2N]-P[20-60/1]
BTLAAKP4-[Q1N,Q2N]-R[1,2,5]-P[20-60/1]
BTLAAKP4-Q[1,2,5]-[R1N,R2N]-P[20-60/1]
BTLAAKP4-Q[1,2,5]-R[1,2,5]-P[20-60/1]
BTLAAKP5-[Q1N,Q2N]-[R1N,R2N]-P[20-60/1]
BTLAAKP5-[Q1N,Q2N]-R[1,2,5]-P[20-60/1]
BTLAAKP5-Q[1,2,5]-[R1N,R2N]-P[20-60/1]
BTLAAKP5-Q[1,2,5]-R[1,2,5]-P[20-60/1]
BTLAAKP6-[Q1N,Q2N]-[R1N,R2N]-P[25-60/1]
BTLAAKP6-[Q1N,Q2N]-R[1,2,5]-P[25-60/1]
BTLAAKP6-Q[1,2,5]-[R1N,R2N]-P[25-60/1]
BTLAAKP6-Q[1,2,5]-R[1,2,5]-P[25-60/1]
BTLAAKP7-[Q1N,Q2N]-[R1N,R2N]-P[25-60/1]
BTLAAKP7-[Q1N,Q2N]-R[1,2,5]-P[25-60/1]
BTLAAKP7-Q[1,2,5]-[R1N,R2N]-P[25-60/1]
BTLAAKP7-Q[1,2,5]-R[1,2,5]-P[25-60/1]
BTLAAKP8-[Q1N,Q2N]-[R1N,R2N]-P[25-60/1]
BTLAAKP8-[Q1N,Q2N]-R[1,2,5]-P[25-60/1]
BTLAAKP8-Q[1,2,5]-[R1N,R2N]-P[25-60/1]
BTLAAKP8-Q[1,2,5]-R[1,2,5]-P[25-60/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	Block Size (mm)	Number of Circuits (Circuits)	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Drawing Q Part Thread Dia. NPT Selection [Q]	Drawing R Part Thread Dia. NPT Selection [R]	Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)	Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)	Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	7	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	10 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	25 x 25	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	7	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	7	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	7	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	7	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	-	-	-	1 ～ 5	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	1/4 [R2N] / 1/8 [R1N]	-	-	1 ～ 5	-
-	1	7 Days	10	EN AW-5052 Equiv.	Clear Anodized Aluminum	35 x 35	8	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	15	Configurable Type	-	-	-	-	1 ～ 5	1 ～ 5

1
2
3
4
5
Next >>

Products homepage

Basic information

Shape	Intlets - None Outlets - Top & Side	Application	Pneumatic

Configure

630Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- EN AW-5052 Equiv.
- EN AW-6063 Equiv.
Clear
Block Size(mm)
- 15 x 15
- 20 x 20
- 25 x 25
- 35 x 35
- 50 x 50
Clear
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- Not Specified (Through)
- T (Tapped)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
15

25

40
[15-60/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
Clear
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
Clear
Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)
3

4
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Type
- BTLA
- BTLAA
- BTLAAKP
- BTLAAP
- BTLAC
- BTLACA
- BTLACAP
- BTLACP
- BTLAK
- BTLAKP
- BTLAL
- BTLALAP
- BTLALP
- BTLAP
- BTLAS
- G-BTLA
- G-BTLAA
- G-BTLAAKP
- G-BTLAAP
- G-BTLAC
- G-BTLACA
- G-BTLACAP
- G-BTLACP
- G-BTLAK
- G-BTLAKP
- G-BTLAL
- G-BTLALAP
- G-BTLALP
- G-BTLAP
- G-BTLAS
Clear
Surface Treatment
- Not Provided
- Clear Anodized Aluminum
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

7 Days or Less

10 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

Tubes / Nylon
MISUMI Shipping Days: 6 Days
Tapered Screw Plugs
MISUMI Standard Price : 0.41 € Shipping Days: Same day
One-Touch Couplings / Threaded Connectors
MISUMI Standard Price : 1.38 € Shipping Days: Same day
One-Touch Couplings / Blind Plug
MISUMI Standard Price : 1.51 € Shipping Days: 5 Days