Rod End Bearings / Standard

Tapped Type
Threaded Type
[ ! ] Please note that the cut cross section of the L Tapped Short Type is rounded, so the ground contact surface may not be uniform.
[ ! ] The thread end of L Short Type has no surface treatment.
[!] The above drawing is for Standard Type. L Short Type does not have T/W dimension.

Product Specifications

Part Number				D	L		L1		M × P		ℓ		B	B1	d1	r	Static Load Capacity Radial Cs {kN}		Mass (g)
Type			d
					Standard	Short	Standard	Short			Standard	Short					(1)	(2)
			3	12	33	—	27	—	M3 × 0.5		15	—	4.5	6	7.4	0.3	—	1.57	4.5
	Standard	L Short Type	4	14	37		30		M4 × 0.7		17		5.3	7	7.6		—	2.25	7
Right-Hand Thread			5	16	41	28	33	20	M5 × 0.8		20	7	6	8	7.7		3.43	3.43	12.5
(1) Steel	PHSO*	PHSON*	6	18	45	33	36	24	M6 × 1.0		22	10	6.75	9	9		4.9	4.9	19
(2) Lubrication Free	PHSOM	PHSOMN*	8	22	53	40	42	29	M8 × 1.25		25	12	9	12	10.4	0.5	6.86	6.86	32
			10	26	61	46	48	33	M10 × 1.5		29	14	10.5	14	12.9		10.8	9.41	54
Left-hand Thread			10 A						M10 × 1.25									—
(1) Steel	PHSOL*	PHSOLN*	12	30	69	54	54	39	M12 × 1.75		33	18	12	16	15.4		16.7	11	85
(2) Lubrication Free	PHSOLM	—	14	34	77	60	60	43	M14 × 2.0		36	19	13.5	19	16.9	0.7	20.6	15.2	126
			14 A						M14 × 1.5									—
[ ! ] d = 3, 4 cannot be selected for the * type.			16	38	85	65	66	46	M16 × 2.0		40	20	15	21	19.4		25	20.2	185
[ ! ] D = 10 A, 14 A, 18, 20, and 22 cannot be selected for the oil free type.			18	42	93	74	72	53	M18 × 2.5		44	25	16.5	23	21.9		29.4	—	260
			18 A						M18 × 1.5									25.2
			20	46	101	84	78	61	M20 × 1.5		47	30	18	25	24.4		34.3	—	340
			22	50	109	91	84	66	M22 × 1.5		51	33	20	28	25.8		41.2	—	435

[ ! ] No Grease Nipple for PHSO(L)5 to 6 and PHSO(L)N5 to 6.

● Cautions on Installation

[ ! ] Rod End cannot bear the thrust load.