Timing belt connecting plates / MXL, XL, L, H, T#, AT#, S#M, #MA# / aluminium

Click on this image to zoom in.

Volume Discount

View the FAQ (8)

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog

Back to the Category Timing Belt

Technical Drawing - Timing Belts

Timing Belt Clamp Plate/Overpressure Prevention/Configurable Hole Position:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Timing Belts

Material: EN AC-51400-T5 Equiv.
Surface Treatment: Clear Anodize

Further specifications can be found under the tab More information.

Composition of a Product Code - Timing Belts

Part Number				-	Number of Holes	-	Hole Specifications, Nominal Dia.	-	L	-	P

Type	-	Belt Type	Belt Nominal Width
TBCF	-	S5M	250	-	4H	-	M4	-	L48	-	P31.5

Alterations - Timing Belts

General Information - Timing Belts

Timing Belt Selection Details

- Material: chloroprene rubber (neoprene), polyurethane (PU)

- Tension cord: glass fibre, aramid fibre, steel

- Width (mm): 1 to 101.6

- Width (in.): 0.19 to 4

- Profile (metric): T5, T10, AT5, AT10, S2M, S3M, S5M, S8M, S14M, MTS8M, EV5GT, EV8YU, 2GT, 3GT, MA3, MA5, MA8, P2M, P3M, P5M, P8M, UP5M, UP8M

- Profile (in.): MXL, XL, L, H

Description/Basics

Timing belts for mechanical engineering are intended for force and power transmission. Depending on the interlocking of the profile, they can alternatively be used for the material flow (transportation) or for positioning.
Timing belts are more maintenance-friendly, efficient and durable compared to roller chains.

Maintenance-friendly: timing belts do not require lubrication, are easy to replace and are very durable, as they do not sag. These properties significantly reduce maintenance costs.

Efficient: drive belts are largely made of natural rubber or polyurethane. As a result, timing belts withstand high speeds. A further advantage of these materials is the weight reduction compared to conventional metal drives. Timing belts are also known for low-noise running and contribute to the general smooth running of an application.

Durability: due to the inserted tension cord made of glass fibre or aramid fibre (Kevlar), timing belts can withstand high tensile stresses and do not tend to sag. An additional layer of nylon fabric on the interlocked side reduces wear due to abrasion and increases the service life.

Timing belts can be used in many ways. The belt profile that suits your application depends on the task of the timing belt. MISUMI offers a suitable belt profile for almost every type of application.

Drive: timing belts are used even at high torque. Drive belts with a rounded trapezoidal profile (e.g., S8M) are often used to drive mechanical components. These are particularly well suited for slip-free transmission of high forces, which can occur in drives of various applications or machines.

Positioning: a semi-circular profile (e.g., GT) is often used for positioning via timing belts. Round profile timing belts are often used in 3D printers and precise scanners. The round shape also offers the advantage that there is little play (reverse play) when the direction changes.

Material flow: timing belts can also be used to transport loads in conveyor systems. A straight trapezoidal profile is often used for this purpose (e.g., AT ). This profile provides a large profile area for load intake and transmission. The MISUMI range also includes conveyor timing belts with nylon fabric on the bearing surface.

An overview of the profile forms by application type can be found in the PDF Overview.

The amount of transmission power depends on many factors. The exact maximum load must be considered and calculated individually according to the application. The calculation for timing belts can be found in the selection of Timing Belts as PDF.
In order not to fall below the minimum number of teeth, the minimum size of the timing pulleys should be considered individually.
In general, a timing belt should be provided with the appropriate pretension to maximize the service life of the timing belt. If the pretension is too low, a jump (slip) can cause wear of the timing belt.

Application Examples - Timing Belts

Application example: synchronous belt - with screw-on terminal and drive belt - synchronous belt for positioning

Application example: workpiece carrier
(1) Stopper bolt with rubber, (2) belt conveyor, (3) workpiece carrier

Application example: synchronous belt drive - synchronous pulley with crimp disc - idler pulley with crimp disc - synchronous tensioner

Application example: of toothed belt drives
(1) Toothed belt, (2) driven Timing pulleys with crimp disc, (3) idler pulley with crimp disc, (4) driving Timing pulleys with crimp disc

Application example: Timing belt
(1) Linear guide, (2) mounting plate, (3) Timing belt, (4) Screw-on terminal

Application example - linear ball bushing and linear shaft synchronous belt - synchronous belt with flange bearings

Application example: Timing belt
(1) Bolt-on terminal, (2) Timing belt, (3) Linear shaft, (4) Linear bushings

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
TBCF-AT10150-4H-M3-L[6-121/1]-P[19-27/0.5]
TBCF-AT10150-4H-M4-L[7-120/1]-P[20-26/0.5]
TBCF-AT10150-4H-M5-L[8-119/1]-P[21-25/0.5]
TBCF-AT10150-4H-N3-L[7-120/1]-P[20-26/0.5]
TBCF-AT10150-4H-N4-L[8-119/1]-P[19-27/0.5]
TBCF-AT10150-4H-N5-L[9-118/1]-P[22-24/0.5]
TBCF-AT10150-6H-M3-L[12-121/1]-P[19-27/0.5]
TBCF-AT10150-6H-M4-L[14-120/1]-P[20-26/0.5]
TBCF-AT10150-6H-M5-L[16-119/1]-P[21-25/0.5]
TBCF-AT10150-6H-N3-L[13-120/1]-P[20-26/0.5]
TBCF-AT10150-6H-N4-L[15-119/1]-P[21-25/0.5]
TBCF-AT10150-6H-N5-L[17-118/1]-P[22-24/0.5]
TBCF-AT10150-8H-M3-L[18-120/1]-P[19-27/0.5]
TBCF-AT10150-8H-M4-L[21-120/1]-P[20-26/0.5]
TBCF-AT10150-8H-M5-L[24-117/1]-P[21-25/0.5]
TBCF-AT10150-8H-N3-L[21-120/1]-P[20-26/0.5]
TBCF-AT10150-8H-N4-L[24-117/1]-P[21-25/0.5]
TBCF-AT10150-8H-N5-L[27-117/1]-P[22-24/0.5]
TBCF-AT10200-4H-M3-L[6-121/1]-P[24-33/0.5]
TBCF-AT10200-4H-M4-L[7-120/1]-P[25-32/0.5]
TBCF-AT10200-4H-M5-L[8-119/1]-P[26-31/0.5]
TBCF-AT10200-4H-N3-L[7-120/1]-P[25-32/0.5]
TBCF-AT10200-4H-N4-L[8-119/1]-P[26-31/0.5]
TBCF-AT10200-4H-N5-L[9-118/1]-P[27-30/0.5]
TBCF-AT10200-6H-M3-L[12-121/1]-P[24-33/0.5]
TBCF-AT10200-6H-M4-L[14-120/1]-P[25-32/0.5]
TBCF-AT10200-6H-M5-L[16-119/1]-P[26-31/0.5]
TBCF-AT10200-6H-N3-L[13-120/1]-P[25-32/0.5]
TBCF-AT10200-6H-N4-L[15-119/1]-P[26-31/0.5]
TBCF-AT10200-6H-N5-L[17-118/1]-P[27-30/0.5]
TBCF-AT10200-8H-M3-L[18-120/1]-P[24-33/0.5]
TBCF-AT10200-8H-M4-L[21-120/1]-P[25-32/0.5]
TBCF-AT10200-8H-M5-L[24-117/1]-P[26-31/0.5]
TBCF-AT10200-8H-N3-L[21-120/1]-P[25-32/0.5]
TBCF-AT10200-8H-N4-L[24-117/1]-P[26-31/0.5]
TBCF-AT10200-8H-N5-L[27-117/1]-P[27-35/0.5]
TBCF-AT10250-4H-M3-L[6-121/1]-P[29-37/0.5]
TBCF-AT10250-4H-M4-L[7-120/1]-P[30-36/0.5]
TBCF-AT10250-4H-M5-L[8-119/1]-P[31-35/0.5]
TBCF-AT10250-4H-N3-L[7-120/1]-P[30-36/0.5]
TBCF-AT10250-4H-N4-L[8-119/1]-P[31-35/0.5]
TBCF-AT10250-4H-N5-L[9-118/1]-P[31.5-34/0.5]
TBCF-AT10250-6H-M3-L[12-121/1]-P[29-37/0.5]
TBCF-AT10250-6H-M4-L[14-120/1]-P[30-36/0.5]
TBCF-AT10250-6H-M5-L[16-119/1]-P[31-35/0.5]
TBCF-AT10250-6H-N3-L[13-120/1]-P[30-36/0.5]
TBCF-AT10250-6H-N4-L[15-119/1]-P[31-35/0.5]
TBCF-AT10250-6H-N5-L[17-118/1]-P[31.5-34.5/0.5]
TBCF-AT10250-8H-M3-L[18-120/1]-P[29-37/0.5]
TBCF-AT10250-8H-M4-L[21-120/1]-P[30-36/0.5]
TBCF-AT10250-8H-M5-L[24-117/1]-P[31-35/0.5]
TBCF-AT10250-8H-N3-L[21-120/1]-P[30-36/0.5]
TBCF-AT10250-8H-N4-L[24-117/1]-P[31-35/0.5]
TBCF-AT10250-8H-N5-L[27-117/1]-P[29-37/0.5]

Minimum order quantity	Standard Shipping Days ?	RoHS	Belt Type	Belt Width (mm) (mm)	Belt Width (Inch) (Inch)	Number of Holes	Hole type	Nominal Dia.	L (mm)	P (mm)
1	9 Days	10	AT10	15	-	4	Tapped Hole	3	6 ～ 121	19 ～ 27
1	9 Days	10	AT10	15	-	4	Tapped Hole	4	7 ～ 120	20 ～ 26
1	9 Days	10	AT10	15	-	4	Tapped Hole	5	8 ～ 119	21 ～ 25
1	9 Days	10	AT10	15	-	4	Through Hole	3	7 ～ 120	20 ～ 26
1	9 Days	10	AT10	15	-	4	Through Hole	4	8 ～ 119	19 ～ 27
1	9 Days	10	AT10	15	-	4	Through Hole	5	9 ～ 118	22 ～ 24
1	9 Days	10	AT10	15	-	6	Tapped Hole	3	12 ～ 121	19 ～ 27
1	9 Days	10	AT10	15	-	6	Tapped Hole	4	14 ～ 120	20 ～ 26
1	9 Days	10	AT10	15	-	6	Tapped Hole	5	16 ～ 119	21 ～ 25
1	9 Days	10	AT10	15	-	6	Through Hole	3	13 ～ 120	20 ～ 26
1	9 Days	10	AT10	15	-	6	Through Hole	4	15 ～ 119	21 ～ 25
1	9 Days	10	AT10	15	-	6	Through Hole	5	17 ～ 118	22 ～ 24
1	9 Days	10	AT10	15	-	8	Tapped Hole	3	18 ～ 120	19 ～ 27
1	9 Days	10	AT10	15	-	8	Tapped Hole	4	21 ～ 120	20 ～ 26
1	9 Days	10	AT10	15	-	8	Tapped Hole	5	24 ～ 117	21 ～ 25
1	9 Days	10	AT10	15	-	8	Through Hole	3	21 ～ 120	20 ～ 26
1	9 Days	10	AT10	15	-	8	Through Hole	4	24 ～ 117	21 ～ 25
1	9 Days	10	AT10	15	-	8	Through Hole	5	27 ～ 117	22 ～ 24
1	9 Days	10	AT10	20	-	4	Tapped Hole	3	6 ～ 121	24 ～ 33
1	9 Days	10	AT10	20	-	4	Tapped Hole	4	7 ～ 120	25 ～ 32
1	9 Days	10	AT10	20	-	4	Tapped Hole	5	8 ～ 119	26 ～ 31
1	9 Days	10	AT10	20	-	4	Through Hole	3	7 ～ 120	25 ～ 32
1	9 Days	10	AT10	20	-	4	Through Hole	4	8 ～ 119	26 ～ 31
1	9 Days	10	AT10	20	-	4	Through Hole	5	9 ～ 118	27 ～ 30
1	9 Days	10	AT10	20	-	6	Tapped Hole	3	12 ～ 121	24 ～ 33
1	9 Days	10	AT10	20	-	6	Tapped Hole	4	14 ～ 120	25 ～ 32
1	9 Days	10	AT10	20	-	6	Tapped Hole	5	16 ～ 119	26 ～ 31
1	9 Days	10	AT10	20	-	6	Through Hole	3	13 ～ 120	25 ～ 32
1	9 Days	10	AT10	20	-	6	Through Hole	4	15 ～ 119	26 ～ 31
1	9 Days	10	AT10	20	-	6	Through Hole	5	17 ～ 118	27 ～ 30
1	9 Days	10	AT10	20	-	8	Tapped Hole	3	18 ～ 120	24 ～ 33
1	9 Days	10	AT10	20	-	8	Tapped Hole	4	21 ～ 120	25 ～ 32
1	9 Days	10	AT10	20	-	8	Tapped Hole	5	24 ～ 117	26 ～ 31
1	9 Days	10	AT10	20	-	8	Through Hole	3	21 ～ 120	25 ～ 32
1	9 Days	10	AT10	20	-	8	Through Hole	4	24 ～ 117	26 ～ 31
1	9 Days	10	AT10	20	-	8	Through Hole	5	27 ～ 117	27 ～ 35
1	9 Days	10	AT10	25	-	4	Tapped Hole	3	6 ～ 121	29 ～ 37
1	9 Days	10	AT10	25	-	4	Tapped Hole	4	7 ～ 120	30 ～ 36
1	9 Days	10	AT10	25	-	4	Tapped Hole	5	8 ～ 119	31 ～ 35
1	9 Days	10	AT10	25	-	4	Through Hole	3	7 ～ 120	30 ～ 36
1	9 Days	10	AT10	25	-	4	Through Hole	4	8 ～ 119	31 ～ 35
1	9 Days	10	AT10	25	-	4	Through Hole	5	9 ～ 118	31.5 ～ 34
1	9 Days	10	AT10	25	-	6	Tapped Hole	3	12 ～ 121	29 ～ 37
1	9 Days	10	AT10	25	-	6	Tapped Hole	4	14 ～ 120	30 ～ 36
1	9 Days	10	AT10	25	-	6	Tapped Hole	5	16 ～ 119	31 ～ 35
1	9 Days	10	AT10	25	-	6	Through Hole	3	13 ～ 120	30 ～ 36
1	9 Days	10	AT10	25	-	6	Through Hole	4	15 ～ 119	31 ～ 35
1	9 Days	10	AT10	25	-	6	Through Hole	5	17 ～ 118	31.5 ～ 34.5
1	9 Days	10	AT10	25	-	8	Tapped Hole	3	18 ～ 120	29 ～ 37
1	9 Days	10	AT10	25	-	8	Tapped Hole	4	21 ～ 120	30 ～ 36
1	9 Days	10	AT10	25	-	8	Tapped Hole	5	24 ～ 117	31 ～ 35
1	9 Days	10	AT10	25	-	8	Through Hole	3	21 ～ 120	30 ～ 36
1	9 Days	10	AT10	25	-	8	Through Hole	4	24 ～ 117	31 ～ 35
1	9 Days	10	AT10	25	-	8	Through Hole	5	27 ～ 117	29 ～ 37

Back to the Category Timing Belt

Technical Drawing - Timing Belts

Open the technical drawing in the new window

Specification Tables - Timing Belts

Part Number			Number of Holes	Selection		L (1mm Increment)	P (0.5mm Increment)	W	A	B	T₁	h	Body Price	Hole Machining Charge (Body Price +)
Type	Belt Type	Belt Nominal Width	Number of Holes	Hole Specifications	Nominal Dia.	L (1mm Increment)	P (0.5mm Increment)	W	A	B	T₁	h	Body Price	4H	6H	8H
TBCF	MXL	025	4H 6H 8H	N (Through hole) M (Tapped Hole)	3	6~17	11	6.4	26	18	4	0.60
		037			3		14~15	9.5		22
		050			3, 4		17~19	12.7		26
	XL	025			3 4 5	6~57	11~17	6.4	66	24	6	1.30
		031					12~18	7.9		25
		037					14~19	9.5		26
		050					17~23	12.7		30
	L	050				6~115	17~25	12.7	124	32	8	2.05
		075					24~31	19.1		38
		100					30~39	25.4		46
		150					43~51	38.1		58
	H	075				6~156	24~31	19.1	165	38	10	2.55
		100					30~39	25.4		46
		150					43~51	38.1		58
		200					55~63	50.8		70
	S2M	040			3	6~17	8~9	4	26	16	4	0.90
		060			3		10~11	6		18
		100			3, 4		14~17	10		24
	S3M	060			3	6~30	10~11	6	39	18		1.25
		100			3		14~15	10		22
		150			3, 4		19~21	15		28
	S5M	100			3 4 5	6~56	14~19	10	65	26	6	2.00
		150					19~25	15		32
		250					29~35	25		42
	S8M	150				6~95	19~27	15	104	34	8	3.00
		250					29~37	25		44
		300					34~43	30		50
		400					44~53	40		60
	MA3	070				6~30	11~13	7	39	20	4	1.1
		100					14~17	10		24
		150					19~22	15		29
	MA5	100				6~56	14~19	10	65	26	6	1.7
		150					19~25	15		32
		250					29~35	25		42
	MA8	150				6~95	19~27	15	104	34	8	2.8
		200					24~32	20		39
		250					29~38	25		45
		400					44~53	40		60
	T5	100				6~56	14~19	10	65	26	6	1.40
		150					19~25	15		32
		200					24~31	20		38
		250					29~36	25		43
	T10	150				6~121	19~27	15	130	34	8	2.70
		200					24~33	20		40
		250					29~37	25		44
		300					34~43	30		50
		400					44~53	40		60
		500					54~63	50		70
	AT5	100				6~56	14~19	10	65	26	6	1.40
	AT5	150				6~56	19~25	15	65	32	6	1.40
	AT10	150				6~121	19~27	15	130	34	8	2.70
		200					24~33	20		40
		250					29~37	25		44

Metal fitting of S□M type can be used with a P□M type belt. The tooth profile complies with the Timing Belts and the Open End Belts.
When selecting Number of Holes 8H, specify L dimension in multiples of 3. When selecting L, P dimensions, make sure that they satisfy the conditions mentioned on *1 or *2 positioned on the right bottom of Drawing.

Alterations - Timing Belts

Products homepage

Basic information

Belt shape	Belt Clamp Plates

Configure

54Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Belt Width (mm)(mm)
1

4

6

6.4

7.9

9.4

10

12.7

15

17.8

19.1

20

25

25.4

30

38.1

40

50

50.8

63.5

101.6
Clear
Belt Width (Inch)(Inch)
0.25

0.31

0.37

0.5

0.7

0.75

1

1.5

2
Clear
Number of Holes
- 4
- 6
- 8
Clear
Hole type
- Tapped Hole
- Through Hole
Clear
Nominal Dia.
- 3
- 4
- 5
Clear
L(mm)
[6-121/1mm Unit(s)]
Clear
P(mm)
8

8.5

9

10.5

12

14.5

15

15.5

16.5

17

18

19

20

20.5
[19-37/0.5mm Unit(s)]
Clear
Type
- TBCF
Clear
Belt Type
- MXL
- XL
- L
- H
- T5
- T10
- AT5
- AT10
- S2M
- S3M
- S5M
- S8M
- MA3
- MA5
- MA8
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

9 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Where does the idler pulleys have to be placed on the timing belt?: Answer:
As a rule, the idler pulleys are positioned on the slack side, since the tension of the timing belt is here lowest during operation. Ideally, the timing belt is tensioned from the inside, because this prevents the timing belt from bending alternately. This is particularly recommended for timing belts with a steel tension cord. The idler pulley should always be larger than the smallest timing pulley of the belt drive system.
Question:
For what purpose can a timing belt with a round profile be used for?: Answer:
Round profile timing belts can be used in many applications. These are well suited for transmitting torque. In addition, the reverse play is very low due to the round profile shape with changing direction of rotation. The timing belts are also well suited for highly precise positioning. Timing belts with a round tooth profile can therefore often be found in 3D printers.
Question:
Can multiple belts be used for the transfer?: Answer:
A transmission can take place via one or more timing belts. If an equal distribution of the forces across the individual belts is not possible, it must be ensured that one belt alone can withstand the maximum load. In order to enable uniform distribution of forces, a precise adjustment is necessary. For this purpose, a toothed belt disc with clamping sleeve can be used, because it can be adjusted continuously and ensure uniform distribution.
Question:
Can a timing belt used for transmission?: Answer:
With timing belts, a gear ratio or reduction in a drive is possible. The gear ratio is established based on the number of teeth on the pulleys. It should be ensured that the minimum number of teeth of the timing pulley disc is not undercut.
Question:
What is the possible tensile stress for timing belts?: Answer:
The maximum allowable tension for MISUMI timing belts depends on the belt type, speed of rotation and belt pulley diameter. For more information, click on this link.
Question:
What is the minimum size of timing pulleys?: Answer:
The minimum size or the minimum number of teeth of a timing pulley depends on the belt type used and the height of the applied speed or rotation. You can find more detailed information about the minimum number of teeth of timing pulley discs in the selection of Timing Pulleys available as a PDF.
Question:
Does a timing belt stretch a lot?: Answer:
As opposed to a roller chain, the expansion is small. The length extension of timing belts is very stable. Therefore, it is not absolutely necessary to re-tension the timing belt during operation, as is necessary for chain drives. This makes the timing belt very easy to maintain compared to the chain. However, it should be ensured that the timing belt is free of oil, as the natural rubber could swell.
Question:
What is the purpose of a timing belt?: Answer:
The primary task of a timing belt is the synchronous and slip-free transmission of force or power. Depending on the task, various profile shapes are available for timing belts. These can be roughly divided into drive, conveying and positioning. In the following overview, you can view the various areas of use: Overview as PDF