Angle brackets / unmachined, through-hole, parallel pin bore / cast iron / treatment selectable (MIKD150-70)

Angle brackets / unmachined, through-hole, parallel pin bore / cast iron / treatment selectable MIKD150-70

Click on this image to zoom in.

Click on this image to zoom in.

  • Angle brackets / unmachined, through-hole, parallel pin bore / cast iron / treatment selectable
  • Angle brackets / unmachined, through-hole, parallel pin bore / cast iron / treatment selectable
  • Promotional pricing
  • Volume Discount

Product Details:

Manufacturer part number: MIKD150-70

Brand: MISUMI

Price: 68.04

Delivery time: 12 Days


Technical Data:

Hole Machining: Through Hole

Surface Treatment: Electroless Nickel Plating

Height H: 150 mm

Dimension A: 70 mm

D: - mm


Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

MIKD150-70

Back to the Category Angle Brackets

Technical Drawing - Angle Brackets

Angle Plates/Cast Iron/Standard Dimensions/No Holes:Related Image
Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Angle Brackets

TypeHole Machining SelectionMaterialSurface Treatment
IKFB (No Hole)
D (Through Hole Diameter Fixed Type)
DM (Through Hole Diameter Selectable Type)
K (Through Hole and Dowel Hole Diameter Fixed Type)
KM (Through Hole and Dowel Hole Diameter Selectable Type)
EN-JL 1040 Equiv.Primer Paint (Gray)
BIKBlack Oxide
MIKElectroless Nickel Plating
BIKDM and MIKKM are not selectable.
*1 Surface treatment is not applied to the machined surfaces and holes.

Further specifications can be found under the tab More information.

Composition of a Product Code - Angle Brackets

Part Number-A-N-D
IKFB350
IKDM100
BIKKM200
-
-
-
150
100
120

-
-

N10
N12


-


D8

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
MIKD150-70
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSHole Machining Surface Treatment Height H
(mm)
Dimension A
(mm)
D
(mm)
N
(mm)

68.04 €

1 Available 12 Days 10Through HoleElectroless Nickel Plating15070--

Loading...

  1. 1

Back to the Category Angle Brackets

Technical Drawing - Angle Brackets

Angle Plates/Cast Iron/Standard Dimensions/No Holes:Related Image
Open the technical drawing in the new window

Specifications Tables - Angle Brackets

 

Part NumberAAngle Plate BodyUnit Price
No Hole
TypeHWTT1IKFBBIKFBMIKFB



No Hole


IKFB
BIKFB
MIKFB
60403086   
100403086   
50S50158   
5010014   
100   
1505050158   
7010014   
7575   
100100   
20075751514   
120100   
2501201001815   
300150   
350150   
400150   
 
Part NumberAAngle Plate BodyThrough HoleUnit Price
Through Hole Diameter FixedThrough Hole
Diameter Selectable
TypeHWTT1NN (Selection)BXFYGIKDBIKDMIKDIKDMMIKDM
Through
Holes

(Through Hole Diameter Fixed)
IKD
BIKD
M
IKD

(Through Hole Diameter Selectable) *2
IKDM
MIKDM
604030863.5-2015153020   --
1004030863.5-2015155530   --
50S50158910
12
14
3035-     
501001411704540     
1004540     
150505015893035-7560     
7010014117040     
757550     
100100704540     
20075751514115040-11070     
120100705050     
25012010018151170505014090     
3001504090190     
350150230100     
400150260120     
*2 Select N for Through Hole Diameter Selectable Types, IKDM and MIKDM.
Portions without specific dimensions are same as FB (No Hole Type).
Part NumberAAngle Plate BodyThrough HoleDowel HoleUnit Price
Through Hole and Dowel
Hole Diameter Fixed
Through Hole
Diameter Selectable
TypeHWTT1NN (Selection)BXFYGDH7DH7 (Selection)ahIKKBIKKMIKKIKKMBIKKM
Through Holes and Dowel Holes

(Through Hole and Dowel Hole Diameter Fixed)
IKK
BIKK
MIKK

(Through Hole and Dowel Hole Diameter Selectable) *3
IKKM
BIKKM
604030863.5-20151530203--40   --
1004030863.5-20151555303--70   --
50S50158910
12
14
3035-66
8
10
     
5010014117045401065     
100454065     
150505015893035-75606-105     
70100141170401055     
757550     
10010070454065     
20075751514115040-110701055145     
12010070505075     
250120100181511705050140901075185     
300150409019085235     
350150230100280     
400150260120320     
*3 Select N and DH7 for Through Hole and Dowel Hole Diameter Selectable Types, IKKM and BIKKM.
*4 When A=40, Dowel Hole is not provided on Base Surfaces (Side A).
Portions without specific dimensions are same as FB (No Hole Type).

General Information - Angle Brackets

Angle console - angle console with through hole - angle bracket with reinforcement rib - angle bracket without hole - angle bracket wide - angle bracket with oblong hole - angle bracket welded

 

Angle Bracket Selection Details

- Material: aluminum, steel, cast steel, stainless steel
- Coatings: untreated, burnished, primed (grey), nickel-plated
- Design: cast, welded
- Perpendicularity: up to 0.02/100
- Bore holes: without bore hole, through-hole, internal thread, dowel pin bore, oblong hole
- Dowel pin bore: H7
- Length A: 40 to 150 mm
- Length H: 50 to 500 mm
- Width: 30 to 100 mm

Description/Basics

Basically, an angle bracket is used for precise and solid fastening or connecting of different components and as frame constructions in mechanical and plant engineering. In most cases, angle brackets are uneven.
Due to its high perpendicularity, an angle bracket is among the precise mounting angles. Thanks to their stiffening rib, the angle bracket is also more solid and stiffer than conventional mounting angles and offers a precise, robust and secure connection.
MISUMI offers angle brackets with configurable through holes and dowel pin bores. The through hole can be converted to a tapped hole using the [MC] option. In addition, with the help of the option [LN, HN], the through hole of the angle brackets can be changed to an elongated hole. The angle bracket itself or the element to be fastened can thus be adjusted. The optional dowel pin holes in conjunction with dowel pins offer the possibility of aligning and mounting components such as manual stages, cylinders or other devices as accurately as possible on an angle bracket.
Our angle brackets are also available as blanks without mounting holes for individual machining.
Due to the many variations of an angle bracket, it offers design flexibility. This allows adapting it to the machine environment. With MISUMI, you can configure and have your steel brackets customized or stainless steel angles customized.
Angle brackets are often used as cylinder holders for air cylinders, as the exact straightness and exact position of the dowel pin bores allow for exact positioning of the cylinders. An angle console is also suitable for holding and holding positioning stages. Occasionally, the angle bracket is also used in clamping technology to accommodate the push-pull toggle clamps, clamp cylinder or gripper.
MISUMI offers for assembly different threaded rods and nuts, as well as washers.

 

Steel angle bracket/steel bracket

The benefits an angle bracket made of steel (cast steel) provides are primarily its high strength and the load capacity of the base material. As a result, steel angle brackets can absorb high loads.
Since steel has good quality, it is less expensive to manufacture, easy to rework and welds well. Compared to many other metallic raw materials, steel is quite cost-effective and can therefore be found in many applications.
Thanks to its good thermal conductivity, a steel angle or steel angle bracket can be used in areas with high temperatures. Since steel tends to oxidize, a coating should be provided as much as possible depending on the angle bracket. For this purpose, you can choose between either burnished, nickel-plated or primed.

 

Stainless steel angle bracket/stainless steel bracket

Angle brackets made of steel or stainless steel are characterized by their high durability. Thanks to their resistance, stainless steel angle brackets are very robust and stable. They are less prone to corrosion because the chrome content forms a passive layer (oxide film). Especially in corrosive environments, it is possible to use an angle bracket made of stainless steel (stainless steel), since the base material is very high-quality. Stainless steel also has high temperature resistance and can be welded. However, at higher temperatures, or even when welding the material, discoloration can occur (tempering colour). The stainless steel angles are also hygienic due to the material and are often used in medical technology.

 

Aluminum angle bracket/aluminum bracket

An important advantage of aluminum angle brackets is their reduced weight compared to steel or stainless steel angle brackets. This special feature can contribute to weight reduction in many applications. With regard to the low weight, the aluminum angle brackets have by comparison a high strength and can withstand high loads.
In addition, the simple processing and post-processing of the material makes the aluminum angle consoles cost-efficient. Similar to stainless steel, aluminum forms an oxide film and is thus well protected against corrosion. Another advantage of the angle bracket made of aluminum is that the base material has a low thermal expansion. This allows these angle consoles to be used in applications that are subject to frequent temperature changes. Angle consoles made of aluminum also have good electrical conductivity and can thus dissipate electrical voltages such as electrical static charges. This is often necessary in electrical systems or in the electronics industry for the production of electronic components.

 

Application Examples - Angle Brackets

Application example: angle bracket - angle bracket with cylinder - angle bracket with guided cylinder - holder cylinder - cylinder holder

Application example: angle bracket with guide cylinder
(1) Angle bracket, (2) Hexagon socket screw, (3) Air cylinder, (4) Dowel pin

Application example: angle bracket - angle bracket with quick clamp - angle bracket with clamping function

Application example: angle bracket with push-pull toggle clamps
(1) Mounting plate, (2) push-pull toggle clamps, (3) angle bracket

Application example: angle bracket - angle bracket with cylinder - angle bracket with cylinder pin bore - cylinder holder - cylinder brackets

Application example: angle bracket with cylinder
(1) Angle bracket, (2) hinge bolts, (3) cylinder

 

 

Industrial Applications

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

Basic information

Material Steel Strength Standard (Cast)

This page is Angle brackets / unmachined, through-hole, parallel pin bore / cast iron / treatment selectable, part number MIKD150-70.
You can find the detail information about specifications and dimensions on part number MIKD150-70.

Frequently Asked Questions (FAQ)

Question:

What do you use the angle brackets for?

Answer:

An angle bracket can be used for a wide variety of applications in mechanical engineering. In general, they are used to connect or fix different components and devices. Angle brackets are manufactured very precisely with their perpendicularity compared to conventional mounting angles. Therefore, angle brackets are also frequently used to accommodate pneumatic cylinders, positioning stages, and stages. Another benefit of the angle bracket is its high rigidity due to the additional stiffening rib. This provides the angle bracket with a very good stability. Therefore, it can absorb heavier loads compared to normal angles.

Question:

What are the different types of steel on angle brackets?

Answer:

MISUMI offers the massive and precise angle bracket in two different types of steel. The MISUMI product range offers the material EN 1.0038 equivalent, which is also known as S235JR. This material is often used for extruded profiles. This shows good ductility, toughness and plasticity. As a further material, the range contains the EN-JL 1040 equivalent. This is grey cast iron with slat graphite, which has very good workability and is often used in machine tools.

Question:

What coatings are available for angle brackets made of steel?

Answer:

Our angle brackets are available untreated for further processing. To protect against corrosion, the angle bracket can be burnished, primed (grey) and nickel-plated.

Question:

What are the advantages of aluminum brackets?

Answer:

Aluminum brackets and aluminum angle brackets have a low weight and are therefore suitable for weight reduction. Aluminum, on the other hand, has a high strength in relation to heavier materials. As a result, these are also suitable for high loads. Another advantage is that aluminum does not require further corrosion protection. In addition, aluminum has a low thermal expansion, which gives it dimensional stability in case of temperature fluctuations.

Show more FAQ Close

Variation of this product

Part Number
BIKD100-50S
BIKD150-100
BIKD150-50
MIKD150-75
MIKD200-120
MIKD200-75
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountStandard
Shipping Days
?
RoHSHole Machining Surface Treatment Height H
(mm)
Dimension A
(mm)
D
(mm)
N
(mm)

44.40 €

1 Available Same day

Stock

10Through HoleBlack Oxide10050 (W 50)--

62.47 €

1 Available 12 Days 10Through HoleBlack Oxide150100--

59.47 €

1 Available 12 Days 10Through HoleBlack Oxide15050--

70.46 €

1 Available 12 Days 10Through HoleElectroless Nickel Plating15075--

98.16 €

1 Available 12 Days 10Through HoleElectroless Nickel Plating200120--

91.83 €

1 Available 12 Days 10Through HoleElectroless Nickel Plating20075--

Complementary Products

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360