Locating Pins / Head Shape Selectable / Chamfered Flat Head with Hexagon Socket / External Thread

MISUMI

(i)Remark

Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog
Technical Information

(Round)

(Diamond)

a = 1.0
d = D - 0.2

Locating Pin - Large Head, Tapered, Threaded, Hex Socket: Related Image

[ ! ] Relief dimensions are reference values.

[ ! ] EN 1.4301 Equiv. products may not be polished and have no centering hole.
[ ! ] For EN 1.4037 Equiv., an identification groove is provided at any position on D part, unless the L dimension is short.
[ ! ] When M < D, the incomplete threaded portion (Pitch × 2) is included in M × 1.5.

Material No.	[M] Material	[S] Surface Treatment	[H] Hardness	P, L, B Configurable	P, L, B, ML Configurable	Shape Code
(1)	EN 1.2510 Equiv.	—	Treated Hardness: 60 to 63 HRC	FPNS	FPNSL	A (Round) D (Diamond)
(2)	EN 1.2510 Equiv.	Hard Chrome Plating	Treaded Hardness: 50 to 55 HRC Plating Hardness: 750 HV or more	GFPNS	GFPNSL
(3)	EN 1.2510 Equiv.	—	—	BFPNS	BFPNSL
(4)	EN 1.4301 Equiv.	—	—	SFPNS	SFPNSL
(5)	EN 1.4301 Equiv.	Hard Chrome Plating	Plating Hardness: 750 HV or more	HFPNS	HFPNSL
(6)	EN 1.4037 Equiv.	—	Treaded Hardness: 50 to 55 HRC	CFPNS	CFPNSL
(7)	EN 1.4401 Equiv.	—	—	LFPNS	—

Specification Table

Part Number			—	P	—	L	—	B	—	ML	—	M

Type	Config.	D
FPNS	A	10	—	P12.00	—	L5	—	B5.0			—	M8
GFPNS	D	16	—	P19.50	—	L14	—	B10.0			—	M12
BFPNSL	D	12	—	P14.50	—	L19	—	B12.0	—	ML20	—	M10

■Tapped and Threaded Recommended Tightening Torque (Reference)

M (Coarse)	Tightening Torque
M (Coarse)	N・cm
M3	98
M4	225
M5	461
M6	784
M8	1911
M10	3783
M12	6605
M16	16366
M20	32928

[!] The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.

■P, L, B Configurable

Part Number				P 0.01 mm Increments	L 1 mm Increments	B 0.1 mm Increments	M (Coarse)				ML	m	(W)	S₁	S₂	E
Type	Config.	D	D Dimension Tolerance g6	P 0.01 mm Increments	L 1 mm Increments	B 0.1 mm Increments	M (Coarse)				ML	m	(W)	S₁	S₂	E
FPNS GFPNS BFPNS SFPNS HFPNS CFPNS LFPNS	A (Round) D (Diamond) [ ! ] Applicable when D ≥ 6	3	-0.002 -0.008	6.00 to 6.50	2 to 12	3.5 to 10.0	3				Mx1.5	2	—	3	—	2
		4	-0.004 -0.012	6.50 to 7.00	2 to 12	2.5 to 10.0	3	4				3	—
		5		6.50 to 8.00	3 to 15	2.5 to 10.0	3	4	5				—
		6		6.50 (8.00)Up to 10.00	3 to 15	2.5 to 12.0	4	5	6				3		3
		8	-0.005 -0.014	9.00 (10.00)Up to 13.00	5 to 15	3.0 to 15.0	4	5	6	8		4	3.5	4	4	2.5
		10	-0.005 -0.014	11.00 (12.00)Up to 15.00	5 to 20	4.5 to 20.0	5	6	8	10			4	5	5	3
		12	-0.006 -0.017	13.00 to 18.00	8 to 20	6.0 to 20.0	6	8	10	12			5	6	6	4
		16	-0.006 -0.017	17.00 to 25.00	8 to 20	8.0 to 20.0	8	10	12	16		5	7	8	8	5
		20	-0.007 -0.020	22.00 to 30.00	10 to 20	8.0 to 20.0	10	12	16	20		5	9	8	8	5

[!] P dimension in () is applicable to Diamond Shape. [!] ML dimension is the specified M dimension × 1.5. [!] When M dimension is not specified, D = M.

■P, L, B, ML Configurable

Part Number				P 0.01 mm Increments	L 1 mm Increments	B 0.1 mm Increments	ML 1 mm Increments	M (Coarse)				m	(W)	S₁	S₂	E
Type	Config.	D	D Dimension Tolerance g6	P 0.01 mm Increments	L 1 mm Increments	B 0.1 mm Increments	ML 1 mm Increments	M (Coarse)				m	(W)	S₁	S₂	E
FPNSL GFPNSL BFPNSL SFPNSL HFPNSL CFPNSL	A (Round) D (Diamond) [ ! ] Applicable when D ≥ 6	3	-0.002 -0.008	6.00 to 6.50	2 to 12	3.5 to 10.0	3 to 9	3				2	—	3	—	2
		4	-0.004 -0.012	6.50 to 7.00	2 to 12	2.5 to 10.0	4 to 12	3	4			3	—
		5		6.50 to 8.00	3 to 15	2.5 to 10.0	5 to 15	3	4	5			—
		6		6.50 (8.00)Up to 10.00	3 to 15	2.5 to 12.0	6 to 18	4	5	6			3		3
		8	-0.005 -0.014	9.00 (10.00)Up to 13.00	5 to 15	3.0 to 15.0	8 to 24	4	5	6	8	4	3.5	4	4	2.5
		10	-0.005 -0.014	11.00 (12.00)Up to 15.00	5 to 20	4.5 to 20.0	10 to 30	5	6	8	10		4	5	5	3
		12	-0.006 -0.017	13.00 to 18.00	8 to 20	6.0 to 20.0	12 to 30	6	8	10	12		5	6	6	4
		16	-0.006 -0.017	17.00 to 25.00	8 to 20	8.0 to 20.0	16 to 40	8	10	12	16	5	7	8	8	5
		20	-0.007 -0.020	22.00 to 30.00	10 to 20	8.0 to 20.0	20 to 40	10	12	16	20	5	9	8	8	5

[ ! ] P dimension in ( ) is applicable to Diamond Shape. [ ! ] When M dimension is not specified, D = M.
[ ! ] When M Dia. is specified, the ML dimension range is listed in the table below.

■ML Dimension Range when M Dia. is specified

M (Coarse)	ML 1 mm Increments
3	3 to 9
4	4 to 12
5	5 to 15
6	6 to 18
8	8 to 24
10	10 to 30
12	12 to 30
16	16 to 40
20	20 to 40

Alterations

Alterations Code	Alteration Details	Application Conditions	Ordering Example
NNC	Adds Relief	[ ! ] Undercut length is approx. Pitch × 2 [NG] Not applicable to D = M	FPNSA8-P10.00-L10-B10.0-M6-NNC

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
BFPNSA3-P[6-6.5/0.01]-L[2-6/1]-B[3.5-10/0.1]
BFPNSA4-P[6.5-7/0.01]-L[2-8/1]-B[2.5-10/0.1]
BFPNSA5-P[6.5-8/0.01]-L[3-10/1]-B[2.5-10/0.1]
BFPNSA6-P[6.5-10/0.01]-L[3-10/1]-B[2.5-12/0.1]
BFPNSA8-P[9-13/0.01]-L[5-10/1]-B[3-15/0.1]
BFPNSA10-P[11-15/0.01]-L[5-15/1]-B[4.5-20/0.1]
BFPNSA12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1]
BFPNSA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]
BFPNSA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]
BFPNSD6-P[8-10/0.01]-L[3-10/1]-B[2.5-12/0.1]
BFPNSD8-P[10-13/0.01]-L[5-10/1]-B[3-15/0.1]
BFPNSD10-P[12-15/0.01]-L[5-15/1]-B[4.5-20/0.1]
BFPNSD12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1]
BFPNSD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]
BFPNSD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]
BFPNSLA3-P[6-6.5/0.01]-L[2-12/1]-B[3.5-10/0.1]-ML[3-9/1]
BFPNSLA4-P[6.5-7/0.01]-L[2-12/1]-B[2.5-10/0.1]-ML[4-12/1]
BFPNSLA5-P[6.5-8/0.01]-L[3-15/1]-B[2.5-10/0.1]-ML[5-15/1]
BFPNSLA6-P[6.5-10/0.01]-L[3-15/1]-B[2.5-12/0.1]-ML[6-18/1]
BFPNSLA8-P[9-13/0.01]-L[5-15/1]-B[3-15/0.1]-ML[8-24/1]
BFPNSLA10-P[11-15/0.01]-L[5-20/1]-B[4.5-20/0.1]-ML[10-30/1]
BFPNSLA12-P[13-18/0.01]-L[8-20/1]-B[6-20/0.1]-ML[12-30/1]
BFPNSLA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]-ML[16-40/1]
BFPNSLA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]-ML[20-40/1]
BFPNSLD6-P[8-10/0.01]-L[3-15/1]-B[2.5-12/0.1]-ML[6-18/1]
BFPNSLD8-P[10-13/0.01]-L[5-15/1]-B[3-15/0.1]-ML[8-24/1]
BFPNSLD10-P[12-15/0.01]-L[5-20/1]-B[4.5-20/0.1]-ML[10-30/1]
BFPNSLD12-P[13-18/0.01]-L[8-20/1]-B[6-20/0.1]-ML[12-30/1]
BFPNSLD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]-ML[16-40/1]
BFPNSLD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]-ML[20-40/1]
CFPNSA3-P[6-6.5/0.01]-L[2-6/1]-B[3.5-10/0.1]
CFPNSA4-P[6.5-7/0.01]-L[2-8/1]-B[2.5-10/0.1]
CFPNSA5-P[6.5-8/0.01]-L[3-10/1]-B[2-10/0.1]
CFPNSA6-P[6.5-10/0.01]-L[3-10/1]-B[2.5-12/0.1]
CFPNSA8-P[9-13/0.01]-L[5-10/1]-B[3-15/0.1]
CFPNSA10-P[11-15/0.01]-L[5-15/1]-B[4.5-20/0.1]
CFPNSA12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1]
CFPNSA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]
CFPNSA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]
CFPNSD6-P[8-10/0.01]-L[3-10/1]-B[2.5-12/0.1]
CFPNSD8-P[10-13/0.01]-L[5-10/1]-B[3-15/0.1]
CFPNSD10-P[12-15/0.01]-L[5-15/1]-B[4.5-20/0.1]
CFPNSD12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1]
CFPNSD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]
CFPNSD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]
CFPNSLA3-P[6-6.5/0.01]-L[2-12/1]-B[3.5-10/0.1]-ML[3-9/1]
CFPNSLA4-P[6.5-7/0.01]-L[2-12/1]-B[2.5-10/0.1]-ML[4-12/1]
CFPNSLA5-P[6.5-8/0.01]-L[3-15/1]-B[2.5-10/0.1]-ML[5-15/1]
CFPNSLA6-P[6.5-10/0.01]-L[3-15/1]-B[2.5-12/0.1]-ML[6-18/1]
CFPNSLA8-P[9-13/0.01]-L[5-15/1]-B[3-15/0.1]-ML[8-24/1]
CFPNSLA10-P[11-15/0.01]-L[5-20/1]-B[4.5-20/0.1]-ML[10-30/1]
CFPNSLA12-P[13-18/0.01]-L[8-20/1]-B[6-20/0.1]-ML[12-30/1]
CFPNSLA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]-ML[16-40/1]
CFPNSLA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]-ML[20-40/1]
CFPNSLD6-P[8-10/0.01]-L[3-15/1]-B[2.5-12/0.1]-ML[6-18/1]
CFPNSLD8-P[10-13/0.01]-L[5-15/1]-B[3-15/0.1]-ML[8-24/1]
CFPNSLD10-P[12-15/0.01]-L[5-20/1]-B[4.5-20/0.1]-ML[10-30/1]
CFPNSLD12-P[13-18/0.01]-L[8-20/1]-B[6-20/0.1]-ML[12-30/1]
CFPNSLD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]-ML[16-40/1]
CFPNSLD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]-ML[20-40/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Head Shape	Surface Treatment	Heat Treatment	Material	[P] Diameter (Head) (mm)	[D] Diameter (Pin) (mm)	[L] Length (Pin) (mm)	[B] Length (Head) (mm)	[ML] Length (Thread) (mm)
-	1	6 Days	10	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	6 ～ 6.5	3	2 ～ 6	3.5 ～ 10	-
-	1	6 Days	10	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	6.5 ～ 7	4	2 ～ 8	2.5 ～ 10	-
-	1	6 Days	10	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	6.5 ～ 8	5	3 ～ 10	2.5 ～ 10	-
-	1	6 Days	10	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	6.5 ～ 10	6	3 ～ 10	2.5 ～ 12	-
-	1	6 Days	10	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	9 ～ 13	8	5 ～ 10	3 ～ 15	-
-	1	6 Days	10	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	11 ～ 15	10	5 ～ 15	4.5 ～ 20	-
-	1	6 Days	10	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	13 ～ 18	12	8 ～ 15	6 ～ 20	-
-	1	6 Days	10	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	17 ～ 25	16	8 ～ 20	8 ～ 20	-
-	1	6 Days	10	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	22 ～ 30	20	10 ～ 20	8 ～ 20	-
-	1	6 Days	10	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	8 ～ 10	6	3 ～ 10	2.5 ～ 12	-
-	1	6 Days	10	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	10 ～ 13	8	5 ～ 10	3 ～ 15	-
-	1	6 Days	10	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	12 ～ 15	10	5 ～ 15	4.5 ～ 20	-
-	1	6 Days	10	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	13 ～ 18	12	8 ～ 15	6 ～ 20	-
-	1	6 Days	10	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	17 ～ 25	16	8 ～ 20	8 ～ 20	-
-	1	6 Days	10	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	22 ～ 30	20	10 ～ 20	8 ～ 20	-
-	1	7 Days	-	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	6 ～ 6.5	3	2 ～ 12	3.5 ～ 10	3 ～ 9
-	1	7 Days	-	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	6.5 ～ 7	4	2 ～ 12	2.5 ～ 10	4 ～ 12
-	1	7 Days	-	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	6.5 ～ 8	5	3 ～ 15	2.5 ～ 10	5 ～ 15
-	1	7 Days	-	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	6.5 ～ 10	6	3 ～ 15	2.5 ～ 12	6 ～ 18
-	1	7 Days	-	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	9 ～ 13	8	5 ～ 15	3 ～ 15	8 ～ 24
-	1	7 Days	-	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	11 ～ 15	10	5 ～ 20	4.5 ～ 20	10 ～ 30
-	1	7 Days	-	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	13 ～ 18	12	8 ～ 20	6 ～ 20	12 ～ 30
-	1	7 Days	-	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	17 ～ 25	-	8 ～ 20	8 ～ 20	16 ～ 40
-	1	7 Days	-	Round	Not Provided	No	[Steel] EN 1.2510 Equiv.	22 ～ 30	-	10 ～ 20	8 ～ 20	20 ～ 40
-	1	7 Days	-	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	8 ～ 10	6	3 ～ 15	2.5 ～ 12	6 ～ 18
-	1	7 Days	-	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	10 ～ 13	8	5 ～ 15	3 ～ 15	8 ～ 24
-	1	7 Days	-	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	12 ～ 15	10	5 ～ 20	4.5 ～ 20	10 ～ 30
-	1	7 Days	-	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	13 ～ 18	12	8 ～ 20	6 ～ 20	12 ～ 30
-	1	7 Days	-	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	17 ～ 25	-	8 ～ 20	8 ～ 20	16 ～ 40
-	1	7 Days	-	Diamond	Not Provided	No	[Steel] EN 1.2510 Equiv.	22 ～ 30	-	10 ～ 20	8 ～ 20	20 ～ 40
-	1	6 Days	10	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	6 ～ 6.5	3	2 ～ 6	3.5 ～ 10	-
-	1	6 Days	10	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	6.5 ～ 7	4	2 ～ 8	2.5 ～ 10	-
-	1	6 Days	10	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	6.5 ～ 8	5	3 ～ 10	2 ～ 10	-
-	1	6 Days	10	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	6.5 ～ 10	6	3 ～ 10	2.5 ～ 12	-
-	1	6 Days	10	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	9 ～ 13	8	5 ～ 10	3 ～ 15	-
-	1	6 Days	10	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	11 ～ 15	10	5 ～ 15	4.5 ～ 20	-
-	1	6 Days	10	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	13 ～ 18	12	8 ～ 15	6 ～ 20	-
-	1	6 Days	10	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	17 ～ 25	16	8 ～ 20	8 ～ 20	-
-	1	6 Days	10	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	22 ～ 30	20	10 ～ 20	8 ～ 20	-
-	1	6 Days	10	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	8 ～ 10	6	3 ～ 10	2.5 ～ 12	-
-	1	6 Days	10	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	10 ～ 13	8	5 ～ 10	3 ～ 15	-
-	1	6 Days	10	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	12 ～ 15	10	5 ～ 15	4.5 ～ 20	-
-	1	6 Days	10	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	13 ～ 18	12	8 ～ 15	6 ～ 20	-
-	1	6 Days	10	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	17 ～ 25	16	8 ～ 20	8 ～ 20	-
-	1	6 Days	10	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	22 ～ 30	20	10 ～ 20	8 ～ 20	-
-	1	7 Days	-	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	6 ～ 6.5	3	2 ～ 12	3.5 ～ 10	3 ～ 9
-	1	7 Days	-	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	6.5 ～ 7	4	2 ～ 12	2.5 ～ 10	4 ～ 12
-	1	7 Days	-	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	6.5 ～ 8	5	3 ～ 15	2.5 ～ 10	5 ～ 15
-	1	7 Days	-	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	6.5 ～ 10	6	3 ～ 15	2.5 ～ 12	6 ～ 18
-	1	7 Days	-	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	9 ～ 13	8	5 ～ 15	3 ～ 15	8 ～ 24
-	1	7 Days	-	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	11 ～ 15	10	5 ～ 20	4.5 ～ 20	10 ～ 30
-	1	7 Days	-	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	13 ～ 18	12	8 ～ 20	6 ～ 20	12 ～ 30
-	1	7 Days	-	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	17 ～ 25	-	8 ～ 20	8 ～ 20	16 ～ 40
-	1	7 Days	-	Round	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	22 ～ 30	-	10 ～ 20	8 ～ 20	20 ～ 40
-	1	7 Days	-	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	8 ～ 10	6	3 ～ 15	2.5 ～ 12	6 ～ 18
-	1	7 Days	-	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	10 ～ 13	8	5 ～ 15	3 ～ 15	8 ～ 24
-	1	7 Days	-	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	12 ～ 15	10	5 ～ 20	4.5 ～ 20	10 ～ 30
-	1	7 Days	-	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	13 ～ 18	12	8 ～ 20	6 ～ 20	12 ～ 30
-	1	7 Days	-	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	17 ～ 25	-	8 ～ 20	8 ～ 20	16 ～ 40
-	1	7 Days	-	Diamond	Not Provided	Directly Quenched	[Stainless Steel] EN 1.4037 Equiv	22 ～ 30	-	10 ～ 20	8 ～ 20	20 ～ 40

Products homepage

Basic information

Basic Shape	Large Head	Tip Shape	Tapered	Inlet Style	With hex socket
Mounting Side Shape	Male thread	Positioning Side O.D. Tolerance	0/-0.01	Mounting Side Outer Dia. Tolerance	g6

Configure

180Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Head Shape
- Round
- Diamond
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
Heat Treatment
- No
- Directly Quenched
Clear
Material
- Steel
  - EN 1.2510 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv
  - EN 1.4301 Equiv.
Clear
[P] Diameter (Head)(mm)
[6-30/0.01mm Unit(s)]
Clear
[D] Diameter (Pin)(mm)
3

4

5

6

8

10

12

16

20
Clear
[L] Length (Pin)(mm)
[2-20/1mm Unit(s)]
Clear
[B] Length (Head)(mm)
[2-20/0.1mm Unit(s)]
Clear
[ML] Length (Thread)(mm)
[3-40/1mm Unit(s)]
Clear
Type
- BFPNSA
- BFPNSD
- BFPNSLA
- BFPNSLD
- CFPNSA
- CFPNSD
- CFPNSLA
- CFPNSLD
- FPNSA
- FPNSD
- FPNSLA
- FPNSLD
- GFPNSA
- GFPNSD
- GFPNSLA
- GFPNSLD
- HFPNSA
- HFPNSD
- HFPNSLA
- HFPNSLD
- SFPNSA
- SFPNSD
- SFPNSLA
- SFPNSLD
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

6 Days or Less

7 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Angles - Resin
MISUMI Shipping Days: -
Centring bushes / collar / brass
MISUMI Shipping Days: 9 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day