Tensioner Idlers / toothed / profile selectable / flanged pulley selectable / single bearing, double bearing / aluminium, steel

Volume Discount

View the FAQ (10)

MISUMI

Order quantities extended (D-JIT)

(i)Remark

The product AGTF20YU8150 is a Make-to-Order item. We have a limited number of ready-made products already on stock which can be shipped immediately. Please use the code AGTF20YU8150_STOCK for immediate shipment.
Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Flanged Idlers with Teeth -PM / GT:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More Information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Type				Material			Surface Treatment
P2M, P3M, P5M, P8M		2GT, 3GT, 5GT, 8YU		Material
Center Bearing	Both Sides Bearing	Center Bearing	Both Sides Bearing	Main Body	Flange	Bearing
APTF	APTFW	AGTF	AGTFW	(*1) Aluminum Alloy 2000 series	EN AW-5052 Equiv.	Steel	Clear Anodize
-	KPTFW	-	-	(*1) Aluminum Alloy 2000 series	EN AW-5052 Equiv.		Hard Clear Anodize *
BPTF	BPTFW	BGTF	BGTFW	EN 1.1191 Equiv.	EN 1.0330 Equiv.		Black Oxide

Further specifications can be found under the tab More Information.

Composition of a Product Code - Toothed Pulleys/Timing Pulleys/Idler Pulleys

• Center Bearing

Part Number

Type	Number of Teeth	Applicable Belt
APTF AGTF	20 30	P5M100 GT5090

• Both Sides Bearing

Part Number				-	d

Type	Number of Teeth		Applicable Belt
APTFW AGTFW	25 20	- -	P5M150 GT3090	- -	6 4

Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Here to the Overview of Options as PDF .

General Information - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Toothed pulley - synchronous pulley - belt pulley - product assortment

Selection details of toothed pulleys/timing pulleys/idler pulleys

- Material: aluminum, steel, stainless steel (stainless steel), plastic

- Coatings: uncoated, burnished, anodized, nickel-plated

- Profile form: 1.5GT, 2GT, 3GT, 5GT, P2M, P3M, P5M, P8M, S2M, S3M, S5M, S8M, S14M, T2.5, T5, T10, AT5, AT10, 5M, 8M, 14M, 8YU, H, L, MXL, XL, PowerGrip GT3: MR2, MR3, MR5

- ISO tolerances: H7

- Belt width (mm): 4, 4.8, 6, 6.4, 7, 7.9, 9, 9.5, 10, 12, 12.7, 15, 18, 19.1, 20, 25, 25.4, 26, 28, 30, 31, 38,1, 40, 50, 50.8, 53, 60, 74, 76.2, 100

- Belt width (inches): 0.19, 0.25, 0.31, 0.37, 0.5, 0.75, 1, 1.5, 2

- Number of teeth: 10 to 72

Description/Basics

The toothed pulley for mechanical engineering is intended for the transmission of force and torque. Timing pulleys enable a gear ratio of speeds through belt pulleys of different sizes. Timing pulleys are more efficient, durable and significantly more maintenance-friendly compared to chain transmissions.

How much torque and load a timing pulley can transmit depends on the width of the belt. The width of the belt must be calculated. It is recommended to ensure the belt is correctly tensioned. MISUMI already offers the suitable idler pulley and return rollers with integrated ball bearings. For design and design help follow this link.

Different profile shapes of the toothed belts and belt pulleys are responsible for the transmission of power. Depending on the positioning accuracy, the applied torque and the conveying weight, MISUMI offers the fitting pulley. Toothed belt drives are generally used in the industry in three areas:
Positioning: Timing pulleys is often used in 3D printers. A toothed pulley with a semi-circular profile (e.g., GT) is often used for the required position accuracy of a 3D printers. The round shape offers the benefit of little play when the direction changes.
Drive: toothed pulleys are also used for high torque. In most cases, a timing pulley with a rounded trapezoidal profile (e.g., S8M) is used. These are particularly well suited for the transmission of high forces, which occur in drives of various applications in order to drive mechanical components.
Conveying: toothed pulleys can also be used for transporting loads. A straight trapezoidal profile is often used for this purpose (e.g., AT). This toothed pulley shape offers a large surface for loading and transmitting of loads.

Which toothed pulley or timing pulley is the right one for your application depends on the respective task of the toothed belt drive. Different toothed disc profiles have proven themselves for each type of application.

Various bore hole shapes and fastening variants are available for shaft mounting. These allow fastening via set screws, keyways and by means of Mecha locks. Fastening via a clamping sleeve has the further advantage that it allows adjusting the alignment continuously. The MISUMI product assortment has these ready-to-install.

Application Examples - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Application example: idler pulley - idler pully toothed with chain tensioner - toothed pulley with chain tensioner

Application example: idler pulley
(1) Idler pulleys, (2) chain tensioner

Application example: return roller - return roller with cantilever pin - synchronous pulley with on-board disc - toothed pulley with on-board disc

Application example: deflection roller
S (1) Toothed pulleys with crimp disc, (2) nut, (3) washer, (4) cantilever shaft, (5) retaining ring

Application example: synchronous pulleys - toothed pulleys with toothed belts - toothed pulley with screw-on clamp

Application example: timing pulleys
(1) Flat head screw, (2) Timing pulley, (3) Timing belt, (4) Screw-on terminal

Application example: toothed belt drives - toothed pulleys with crimp disc - idler pulley with crimp disc - tensioning of the toothed belt

Application example: of toothed belt drives
(1) Toothed belt, (2) driven toothed pulley with crimp disc, (3) idler pulley with crimp disc, (4) driving toothed pulley with crimp disc

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
AGTF20GT5090
AGTF20GT5120
AGTF20YU8150
AGTF20YU8200
AGTF24GT5090
AGTF24GT5120
AGTF28GT5090
AGTF28GT5120
AGTF30GT3060
AGTF30GT3090
AGTF30GT5090
AGTF30GT5120
AGTF30YU8150
AGTF30YU8200
AGTF30YU8250
AGTF40GT2060
AGTF40GT2090
AGTFW20-GT3090-5
AGTFW20-GT3150-5
AGTFW20-GT5120-8
AGTFW20-GT5150-8
AGTFW24-GT3090-6
AGTFW24-GT3150-6
AGTFW30-GT2040-5
AGTFW30-GT2060-5
AGTFW30-GT2090-5
AGTFW30-GT3090-8
AGTFW30-GT3150-8
AGTFW30-GT5120-8
AGTFW30-GT5150-12
AGTFW30-YU8200-25
AGTFW30-YU8250-25
AGTFW32-GT5120-12
AGTFW32-GT5150-12
AGTFW36-GT5120-15
AGTFW36-GT5150-15
APTF20P5M100
APTF20P5M150
APTF20P8M150
APTF20P8M250
APTF24P8M250
APTF28P5M100
APTF28P5M150
APTF30P3M100
APTF30P3M150
APTF30P8M150
APTF30P8M250
APTF40P2M060
APTFW25-P5M100-8
APTFW25-P5M150-8
APTFW26-P8M150-12
APTFW26-P8M250-12
APTFW28-P5M100-10
APTFW28-P5M150-10
APTFW30-P8M150-15
APTFW30-P8M250-15
APTFW30-P8M250-20
BGTF20GT5090
BGTF20GT5120
BGTF20YU8150

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Belt Type	Belt Width (mm)	[T] Number of Teeth	Material	Surface Treatment	[d] Diameter (Shaft Bore) (mm)
30.88 €	1		12 Days	10	5GT	9	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	8
32.38 €	1		12 Days	10	5GT	12	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	8
55.56 €	1		12 Days	10	8YU	15	20	[Aluminum] EN AW-2017 Equiv. (Duralumin)	Clear Anodize	20
64.14 €	1		12 Days	10	8YU	20	20	[Aluminum] EN AW-2017 Equiv. (Duralumin)	Clear Anodize	20
37.08 €	1		12 Days	10	5GT	9	24	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
41.25 €	1		12 Days	10	5GT	12	24	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
39.74 €	1		12 Days	10	5GT	9	28	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
40.61 €	1		12 Days	10	5GT	12	28	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
31.13 €	1		12 Days	10	3GT	6	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
34.79 €	1		12 Days	10	3GT	9	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
43.26 €	1		12 Days	10	5GT	9	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
49.09 €	1		12 Days	10	5GT	12	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
72.75 €	1		12 Days	10	8YU	15	30	[Aluminum] EN AW-2017 Equiv. (Duralumin)	Clear Anodize	-
82.12 €	1		12 Days	10	8YU	20	30	[Aluminum] EN AW-2017 Equiv. (Duralumin)	Clear Anodize	-
91.47 €	1		12 Days	10	8YU	25	30	[Aluminum] EN AW-2017 Equiv. (Duralumin)	Clear Anodize	-
29.74 €	1		12 Days	10	2GT	6	40	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
36.57 €	1		12 Days	10	2GT	9	40	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
35.31 €	1		12 Days	10	3GT	9	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	5
42.00 €	1		12 Days	10	3GT	15	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	5
44.78 €	1		12 Days	10	5GT	12	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	8
49.09 €	1		12 Days	10	5GT	15	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	8
36.43 €	1		12 Days	10	3GT	9	24	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
40.86 €	1		12 Days	10	3GT	15	24	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
30.36 €	1		12 Days	10	2GT	4	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
33.53 €	1		12 Days	10	2GT	6	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
35.31 €	1		12 Days	10	2GT	9	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
41.13 €	1		12 Days	10	3GT	9	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
47.44 €	1		12 Days	10	3GT	15	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
59.21 €	1		12 Days	10	5GT	12	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
64.79 €	1		12 Days	10	5GT	15	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
125.13 €	1		12 Days	10	8YU	20	30	[Aluminum] EN AW-2017 Equiv. (Duralumin)	Clear Anodize	-
137.15 €	1		12 Days	10	8YU	25	30	[Aluminum] EN AW-2017 Equiv. (Duralumin)	Clear Anodize	-
65.53 €	1		12 Days	10	5GT	12	32	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
71.74 €	1		12 Days	10	5GT	15	32	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
69.96 €	1		12 Days	10	5GT	12	36	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
76.54 €	1		12 Days	10	5GT	15	36	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-
34.67 €	1	Available	10 Days	10	P5M	10	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	8
41.25 €	1	Available	10 Days	10	P5M	15	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	8
68.70 €	1	Available	10 Days	10	P8M	15	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	12
89.21 €	1	Available	10 Days	10	P8M	25	20	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	15
100.21 €	1	Available	10 Days	10	P8M	25	24	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	12
46.43 €	1	Available	10 Days	10	P5M	10	28	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	10
51.49 €	1	Available	10 Days	10	P5M	15	28	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	10
45.42 €	1	Available	10 Days	10	P3M	10	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	6
48.45 €	1	Available	10 Days	10	P3M	15	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	6
92.49 €	1	Available	10 Days	10	P8M	15	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	15
117.42 €	1	Available	10 Days	10	P8M	25	30	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	15
38.21 €	1	Available	10 Days	10	P2M	6	40	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	6
53.64 €	1	Available	10 Days	10	P5M	10	25	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	8
59.21 €	1	Available	10 Days	10	P5M	15	25	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	8
98.18 €	1	Available	10 Days	10	P8M	15	26	[Aluminum] Aluminum Alloy 7000 series	Clear Anodize	12
118.31 €	1	Available	10 Days	10	P8M	25	26	[Aluminum] Aluminum Alloy 7000 series	Clear Anodize	12
69.71 €	1	Available	10 Days	10	P5M	10	28	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	10
75.79 €	1	Available	10 Days	10	P5M	15	28	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	10
108.82 €	1	Available	10 Days	10	P8M	15	30	[Aluminum] Aluminum Alloy 7000 series	Clear Anodize	15
130.95 €	1	Available	10 Days	10	P8M	25	30	[Aluminum] Aluminum Alloy 7000 series	Clear Anodize	15
132.48 €	1	Available	10 Days	10	P8M	25	30	[Aluminum] Aluminum Alloy 7000 series	Clear Anodize	20
31.51 €	1		12 Days	10	5GT	9	20	EN 1.1191 Equiv.	Black Oxide	8
33.28 €	1		12 Days	10	5GT	12	20	EN 1.1191 Equiv.	Black Oxide	8
57.96 €	1		12 Days	10	8YU	15	20	EN 1.1191 Equiv.	Black Oxide	20

Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Open the technical drawing in the new window

Specification Tables - Toothed Pulleys/Timing Pulleys/Idler Pulleys

■P2M, P3M, P5M, P8M (Center Bearing)

Part Number			Shaft Dia. d	P.D.	O.D.	F		E		A	W	S	Bearing Dimensions			Unit Price
Type	Number of Teeth	Applicable Belt				APTF	BPTF	APTF	BPTF				No.	D	B	APTF	BPTF
APTF BPTF	40	P2M060	6	25.46	24.96	32	-	23	-	7.5	11.5	3.25	696ZZx1	15	5		-
	30	P3M100	6	28.65	27.89	35	35	25	25	12	16	5	626ZZx1	19	6
		P3M150								17	21	4.5	626ZZx2
	20	P5M100	8	31.83	30.69	35	-	25	-	11.6	16	5	698ZZx1	19	6		-
		P5M150								16.6	21	4.5	698ZZx2				-
	28	P5M100	10	44.56	43.42	50	50	38	38	11.6	16	3.5	6200ZZx1	30	9
		P5M150								16.6	21	6
	20	P8M150	12	50.93	49.56	55	-	40	-	16.8	22	6	6201ZZx1	32	10		-
		P8M250	15							27.8	33	5.5	6202ZZx2	35	11		-
	24	P8M250	12	61.12	59.74	67	-	50	-	27.8	33	6.5	6201ZZx2	32	10		-
	30	P8M150	15	76.39	75.02	83	83	63	63	16.8	22	5.5	6202ZZx1	35	11
		P8M250								27.8	33	5.5	6202ZZx2

Radial G dimensions of the opening on the hub side are the same as D dimensions.

■P5M, P8M (Both Sides Bearing)

Part Number			Shaft Dia. d	P.D.	O.D.	F		E		A	W	Dh	Bearing Dimensions			Unit Price
Type	Number of Teeth	Applicable Belt				APTFW KPTFW	BPTFW	APTFW KPTFW	BPTFW				No.	D	B	APTFW	KPTFW	BPTFW
APTFW KPTFW BPTFW	25	P5M100	6	39.79	38.65	-	44	-	32	11.6	16	13	696ZZx2	15	5	-	-
		P5M150								16.6	21					-	-
		P5M100	8			44		32		11.6	16	16.5	698ZZx2	19	6
		P5M150								16.6	21
	28	P5M100	10	44.56	43.42	50	50	38	38	11.6	16	19.5	6900ZZx2	22	6
		P5M150								16.6	21
	30	P5M150	12	47.75	46.60	-	55	-	40	16.6	21	24	6001ZZx2	28	8	-	-
	36	P5M150	15	57.30	56.15	-	67	-	50	16.6	21	28	6002ZZx2	32	9	-	-
	26	P8M150	12	66.21	64.84	74	74	58	58	16.8	22	24	6001ZZx2	28	8
		P8M250								27.8	33
	30	P8M150	15	76.39	75.02	83	83	63	63	16.8	22	28	6002ZZx2	32	9
		P8M250								27.8	33
		P8M250	20							27.8	33	36	6004ZZx2	42	12

■2GT, 3GT, 5GT, 8YU (Center Bearing)

Part Number			Shaft Dia.	P.D.	O.D.	F	E	A	W	S	Bearing Dimensions				Unit Price 1 ~ 9 pc(s).
Type	Number of Teeth	Applicable Belt	d	P.D.	O.D.	F	E	A	W	S	No.	D	B	G	AGTF	BGTF
AGTF BGTF	40	GT2060	6	25.46	24.96	30	21	7.0	10.3	2.15	606ZZx1	17	6	17		-
	40	GT2090	6	25.46	24.96	30	21	10.0	13.3	3.65	606ZZx1	17	6	17		-
	30	GT3060	6	28.65	27.89	32	23	7.3	11.0	2.50	606ZZx1	17	6	17		-
	30	GT3090	6	28.65	27.89	32	23	10.3	14.0	4.00	606ZZx1	17	6	17		-
	20	GT5090	8	31.83	30.69	35	24	10.3	14.0	4.00	698ZZx1	19	6	19
	20	GT5120	8	31.83	30.69	35	24	13.3	17.0	5.50	698ZZx1	19	6	19
	24	GT5090	10	38.20	37.06	42	30	10.3	14.0	4.50	6800ZZx1	19	5	20
	24	GT5120	10	38.20	37.06	42	30	13.3	17.0	3.50	6800ZZx2	19	5	20
	28	GT5090	10	44.56	43.42	48	36	10.3	14.0	4.50	6800ZZx1	19	5	20
	28	GT5120	10	44.56	43.42	48	36	13.3	17.0	6.00	6800ZZx1	19	5	20
	30	GT5090	12	47.75	46.61	51	39	10.3	14.0	4.50	6801ZZx1	21	5	22
	30	GT5120	12	47.75	46.61	51	39	13.3	17.0	6.00	6801ZZx1	21	5	22
	20	YU8150	20	50.93	49.56	62	40	16.7	23.0	8.00	6804ZZx1	32	7	34
	20	YU8200	20	50.93	49.56	62	40	21.7	28.0	7.00	6804ZZx2	32	7	34
	30	YU8150	25	76.39	75.02	85	64	16.7	23.0	8.00	6805ZZx1	37	7	38
		YU8200	25				64	21.7	28.0	7.00	6805ZZx2	37	7	38
		YU8250	25				64	26.7	33.0	9.50	6805ZZx2	37	7	38

For orders larger than indicated quantity, please request a quotation.

■2GT, 3GT, 5GT, 8YU (Both Sides Bearing)

Part Number			Shaft Dia.	P.D.	O.D.	F	E	A	W	Dh	Bearing Dimensions			Unit Price 1 ~ 9 pc(s).
Type	Number of Teeth	Applicable Belt	d	P.D.	O.D.	F	E	A	W	Dh	No.	D	B	AGTFW	BGTFW
AGTFW BGTFW	30	GT2040	5	19.10	18.59	24	15	5.0	8.3	7	675ZZx2	8	2.5		-
		GT2060	5				15	7.0	10.3	7	675ZZx2	8	2.5		-
		GT2090	5				15	10.0	13.3	7	675ZZx2	8	2.5		-
	20	GT3090	5	19.10	18.34	23	14	10.3	14.0	7	675ZZx2	8	2.5		-
	20	GT3150	5	19.10	18.34	23	14	16.3	20.0	7	675ZZx2	8	2.5		-
	24	GT3090	6	22.92	22.16	26	18	10.3	14.0	9	676ZZx2	10	3		-
	24	GT3150	6	22.92	22.16	26	18	16.3	20.0	9	676ZZx2	10	3		-
	30	GT3090	8	28.65	27.89	32	23	10.3	14.0	11	678ZZx2	12	3.5		-
	30	GT3150	8	28.65	27.89	32	23	16.3	20.0	11	678ZZx2	12	3.5		-
	20	GT5120	8	31.83	30.69	35	24	13.3	17.0	11	678ZZx2	12	3.5
	20	GT5150	8	31.83	30.69	35	24	16.3	20.0	11	678ZZx2	12	3.5
	30	GT5120	8	47.75	46.61	51	39	13.3	17.0	11	678ZZx2	12	3.5
	30	GT5150	12	47.75	46.61	51	39	16.3	20.0	18.5	6801ZZx2	21	5
	32	GT5120	12	50.93	49.79	55	42	13.3	17.0	18.5	6801ZZx2	21	5
	32	GT5150	12	50.93	49.79	55	42	16.3	20.0	18.5	6801ZZx2	21	5
	36	GT5120	15	57.30	56.16	61	49	13.3	17.0	21.5	6802ZZx2	24	5
	36	GT5150	15	57.30	56.16	61	49	16.3	20.0	21.5	6802ZZx2	24	5
	30	YU8200	25	76.39	75.02	85	64	21.7	28.0	34.5	6805ZZx2	37	7
	30	YU8250	25	76.39	75.02	85	64	26.7	33.0	34.5	6805ZZx2	37	7

For orders larger than indicated quantity, please request a quotation.

Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Here to the Option Overview PDF

Products homepage

Basic information

Type	Idlers with Teeth	Timing Pulleys/Idlers	Idlers

Configure

108Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Belt Type
2GT

3GT

5GT

8YU

P2M

P3M

P5M

P8M
Clear
Belt Width(mm)
4

6

9

10

12

15

20

25
Clear
[T] Number of Teeth
20

24

25

26

28

30

32

36

40
Clear
Material
- EN 1.1191 Equiv.
- Aluminum
  - EN AW-2017 Equiv. (Duralumin)
  - 2000 Series Aluminum Alloy (Duralumin)
  - Aluminum Alloy 7000 series
Clear
Surface Treatment
- Black Oxide
- Clear Anodize
- Hard Clear Anodize
Clear
[d] Diameter (Shaft Bore)(mm)
5

6

8

10

12

15

20
Clear
Type
- AGTFW□□-GT
- AGTFW□□-YU
- AGTF□□GT
- AGTF□□YU
- APTFW□□-P□M
- APTF□□P□M
- BGTFW□□-GT
- BGTFW□□-YU
- BGTF□□GT
- BGTF□□YU
- BPTFW□□-P5M
- BPTFW□□-P8M
- BPTF□□P□M
- KPTFW□□-P□M
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

10 Days or Less

12 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Do you have any belt pulleys without a hole?: Answer:
The MISUMI toothed pulleys always have a pilot bore. It is expanded depending on your configuration. It provides the advantage that the belt pulleys are already provided with a suitable shaft bore ready for installation. Therefore, it does not require time-consuming post-processing.
Question:
Do you have timing pulleys made of aluminum?: Answer:
The MISUMI online shop also offers timing pulleys or toothed pulleys in aluminum. Furthermore, we are also offering belt pulleys in steel and stainless steel. The return rollers and idler pulleys for the timing belts are also available in plastic.
Question:
Is a transmission with toothed belt pulleys possible?: Answer:
With toothed pulleys, a gear ratio is possible in a drive. The gear ratio is established based on the number of teeth on the belt pulleys. It should be ensured that the minimum number of teeth of the timing pulley disc is not undercut.
Question:
Which type of the toothed belt pulley can be clamped during assembly?: Answer:
There are a number of ways to install timing pulleys on a shaft. For applications that are not exposed to high torque, such as conveyors, it can be sufficient to fasten a timing pulley using clamping threaded pins. For this purpose, the shaft should have a flat surface.
For higher loads, a toothed pulley with a keyway can also be used.
A further variant is the fastening of a timing pulley via a conical chip sleeve. Depending on the type of Mecha lock, the timing pulley requires lateral internal threads, which can be added through additional options in the MISUMI online shop.
A timing pulley with a bore hole can also be combined with a Mech lock. MISUMI is offering this combination as a set.
Question:
Where do you position the tension roller?: Answer:
If an idler pulley should be utilised, it should be positioned on the sag side. This means that the idler pulley is attached to the side not subjected to pull.
Ideally, a toothed idler pulley is mounted on the inside of the toothed belt. The tensioning roller should always be larger than the smallest toothed idler pulley of the belt drive system.
If an idler pulley must tension the toothed belt from the outside, then a non-toothed (flat) idler pulley should be used. Cantilever pins, which MISUMI offers in various geometric versions, are suitable for fastening.
Question:
Which parallel key can be used for the toothed pulleys?: Answer:
The parallel key size is based on the shaft diameter. In this case, it is recommended using the MISUMI parallel keys, as they fit better when MISUMI toothed pulleys are used. See Overview available as PDF for keyway tolerances.
Question:
Is a timing pulley with a round profile better?: Answer:
Timing pulleys and round-profile timing belts are not recommended for every application. For example, the round profile shape is well suited for applications that require high positioning accuracy. Therefore, they are often used in 3D printers and scanners. Compared to other profile shapes, the round profile shape has a higher wear resistance. Another advantage of the round profile shape is the minimized play in the return (reverse play).
Question:
Which belt pulley is suitable for Gates toothed belts?: Answer:
The GT and EV timing pulleys are suitable for Gates’ toothed belts. However, these require you put attention to the slope (distance of the teeth) of the toothed belt. It must be checked whether these correspond to the selected toothed pulley.
Question:
Are the curtain discs necessary for the toothed pulleys?: Answer:
It is recommended using the smaller belt pulleys particularly with curb disc. The curb disk ensures that the toothed belt does not migrate down from the toothed belt pulley. Even with the smallest misalignment of a pulley, there may be a risk that the toothed belt will move and jump during operation.
Question:
How is the gearing of the toothed pulleys manufactured?: Answer:
The gear teeth of the MISUMI toothed belt pulley are mainly pushed. This ensures high manufacturing accuracy. As a result, the teeth fit precisely into the toothed belt profile of the timing belts and ensure optimal power and torque transmission.