Deep groove ball bearings / single row / MISUMI (B6004Z)

Promotional pricing ends 30/11/2024
Volume Discount

MISUMI

Product Details:

Manufacturer part number: B6004Z

Brand: MISUMI

Price: 3.66 €

Delivery time: 5 Days

Technical Data:

I.D. d: 20 φ

O.D. D: 42 φ

Width B (or T): 12 mm

Basic Load Rating Cr (Dynamic): 9400 N

Allowable Rotational Speed: 18000 1/min

Stock

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

B6004Z

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Deep Groove/Single Shielded:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Ball Bearings

Material: EN 1.3505 Equiv.

For further specifications please see the More information tab.
Information on tolerances and rotational accuracy of the radial bearings can be found in the following PDF: Ball bearing table / tolerances as PDF

Composition of a Product Code - Ball Bearings

Part Number

B6003Z

General Information - Ball Bearings

Ball bearing - deep groove ball bearing - axial bearing - axial ball bearing - axial groove ball bearing - angular ball bearing - spherical ball bearing - tension bearing

Ball Bearing Selection Details

- Ball material: steel, stainless steel, ceramic, plastic, glass, chrome-plated

- Type of bearings: axial ball bearings, thin section bearings, spherical ball bearings, deep groove ball bearings, single-row angular ball bearings, double-row ball bearings, tension bearings, four-point bearings

- Outer ring: flat, spherical, with flange, annular groove, U-groove, V-groove

- Properties: heat-resistant, non-magnetic, corrosion-resistant, dust-proof, vacuum, high speed

- Inner diameter: 2 mm to 50 mm

- Outer diameter: 5 mm to 110 mm

Ball bearing designation (suffix):

In addition to the dimensional designation of the ball bearing, ball bearings often also have a designation for a cover disc or sealing disc. The following names are the most common names of various manufacturers that can be selected in the MISUMI online shop.

- Double-sided sealing washer: 2RSH/2RS1, 2RSR/C-2HRS, DDU/DD
- Single-sided sealing washer: RSH/RS1, RSR/C-HRS, DU
- Double-sided sealing washer with low friction: 2RSL/2RZ/VV
- Double-sided cover disc: 2Z/ZZ, 2ZR/C-2Z
- Single sided cover disc: Z, ZR/C-Z/Z

Description/Basics

Rolling bearings

Rolling bearings are generally divided into ball bearings and roller bearings. Ball bearings are a popular type of rolling bearings due to their high permissible speed and low friction.
In the MISUMI online shop, you can purchase ball bearings that can be customized to your applications and environmental conditions. Our ball bearings are available in different materials and in a combination of different materials (hybrid bearings). In addition, MISUMI offers ball bearings already integrated into the housing as bearing housing.

Grooved ball bearings

Grooved ball bearings are the most commonly used rotary rolling bearings. This type of ball bearing is ideally suited for supporting rotating machine elements. A grooved ball bearings are intended for load bearing of radial forces and light axial forces. Grooved ball bearings are designed for high speeds and are used in a wide variety of industrial applications and designs. MISUMI already offers ball bearings integrated into housings and holders as bearing housings.

Areas of Application

Ball bearing - chemical resistance

Chemical resistance		Plastic ball			Metal ball		Ceramic ball
Bearing rings		UHMW	PEEK	PTFE	EN 1.4125 equivalent	EN 1.4301 equivalent	EN 1.4125 equivalent	EN 1.4542 equivalent
Cover plate		-	-	-	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent
Bearing balls		Glass	Ceramic (aluminum oxide)	Ceramic (aluminum oxide)	EN 1.4125 equivalent	EN 1.4301 equivalent	Ceramic	Ceramic
Ball cage		UHMW	PEEK	PTFE	EN 1.4301 equivalent	EN 1.4301 equivalent	Fluoroplastic	Fluoroplastic
Acids	Hydrochloric acid	suitable to a limited extent	good	very good	unsuitable	good	suitable to a limited extent	good
	Sulfuric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
	Nitric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
Bases		unsuitable	very good	very good	unsuitable	very good	good	very good
Solvents		very good	very good	very good	unsuitable	very good	good	very good
Salt water		very good	very good	very good	unsuitable	very good	good	very good
Water		very good	very good	very good	unsuitable	very good	very good	very good

Comparison Table The ball bearing comparison table is provided for comparison purposes only (consider the lubricant and the sealing washer separately).

Ball bearing materials

In the MISUMI online shop, ball bearings are available in cost-effective rolling bearing steel, corrosion-resistant stainless steel and stainless steel. Furthermore, our product range includes various hybrid bearings in the following combinations: metal & ceramic, plastic & ceramic, plastic & glass.

Our various materials offer good resistance to various environmental influences. Our ball bearing shop includes the ball materials stainless steel, steel, UHMW, PEEK, PTFE, ceramic and glass.

Instructions for Use / Installation Information - Ball Bearings

Installation Information

An incorrect assembly and disassembly can damage a ball bearing. Therefore, a suitable tool must always be used to assemble and disassemble ball bearings or roller bearings.
Ball bearings should not be assembled with a hammer, as this can deform the ball bearing. It is recommended using a suitable press. During pressing, the contact surface can be provided with lubricant to protect the surfaces and facilitate assembly.
It is best to use a bearing puller for disassembly.

Maintenance

The ball bearing in roller bearings should be inspected for damage during maintenance.
Before regreasing, a ball bearing should first be thoroughly cleaned.
Remaining contamination in the bearing can damage the ball bearing. As a rule, a ball bearing should not be completely filled with grease, as this can cause the bearing to heat up too much and can cause it to fail.
For encapsulated and sealed ball bearings, it is recommended to replace the bearing. Maintenance is not recommended due to the risk of damage to the cover place or seal.

Supplementary Article

Bearing Lock Nuts

Shaft nuts - lock nuts - steel shaft nut - stainless steel shaft nut - shaft with retaining nut - shaftnNut with clamp screw - shaft nut with grub screw - shaft assembly

Bearings with Housing

Bearing with housing - bearing housing - bearing units - ball bearing holder - ball bearing with housing - bearing housing with flange - shaft holder with ball bearing

Axles / Rotary Shafts

Rotary axis - offset rotary shaft - double offset shaft - female threaded shaft - keyway shaft

Drive shafts

Motor shaft - torsion shaft - shaft with collar - shaft with shoulder - offset shaft - keyway shaft

Plain Bearing (Bushes)

Plain bearing - maintenance free - plain bearing bushings - plain bearing bushing with collar - plain bearing bushing with flange - plastic bushing - plastic plain bearing bushing

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
B6004Z

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
	3.66 €	1	Available	5 Days	10	20	42	12	9400	18000	5000

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Specification Tables - Ball Bearings

Part Number	d	D	B	r (min)	Basic Load Rating		Allowable Rotational Speed rpm (Reference)	Relative Dimensions				Mass (g) (Reference)	Unit Price
					Cr (Dynamic) kN	Co (Static) kN		Ds		dh (max)	R (max)
					Cr (Dynamic) kN	Co (Static) kN		(min)	(max)	dh (max)	R (max)
B6000Z	10	26	8	0.3	4.55	1.97	30000	12	13	24	0.3	18
B6200Z		30	9	0.6	5.1	2.39	24000	14	16	26	0.6	32
B6300Z		35	11	0.6	8.1	3.45	22000		16.5	31	0.6	52
B6001Z	12	28	8	0.3	5.1	2.37	28000		15.5	26	0.3	22
B6201Z		32	10	0.6	6.8	3.05	22000	16	17	28	0.6	37
B6301Z		37	12	1	9.7	4.2	20000	17	18	32	1	60
B6002Z	15	32	9	0.3	5.6	2.83	24000	17	19	30	0.3	31
B6202Z		35	11	0.6	7.65	3.75	20000	19	20.5	31	0.6	45
B6302Z		42	13	1	11.4	5.45	17000	20	22.5	37	1	83
B6003Z	17	35	10	0.3	6	3.25	22000	19	21.5	33	0.3	41
B6203Z		40	12	0.6	9.55	4.8	17000	21	23.5	36	0.6	67
B6303Z		47	14	1	13.6	6.65	15000	22	25.5	42	1	113
B6004Z	20	42	12	0.6	9.4	5	18000	24	25.5	38	0.6	68
B6204Z		47	14	1	12.8	6.6	15000	25	26.5	42	1	107
B6304Z		52	15	1.1	15.9	7.9	14000	26.5	28	45.5	1	145
B6005Z	25	47	12	0.6	10.1	5.85	15000	29	30	43	0.6	79
B6205Z		52	15	1	14	7.85	13000	30	32	47	1	129
B6305Z		62	17	1.1	20.6	11.2	11000	31.5	36	55.5		235
B6006Z	30	55	13	1	13.2	8.3	13000	35	36.5	50		116
B6206Z		62	16	1	19.5	11.3	11000	35	38.5	57		199
B6306Z		72	19	1.1	26.7	15	9500	36.5	42.5	65.5		345
B6007Z	35	62	14	1	16	10.3	11000	40	41.5	57		151
B6207Z		72	17	1.1	25.7	15.3	9500	41.5	44.5	65.5		284
B6307Z		80	21	1.5	33.5	19.2	8500	43	47	72	1.5	464
B6008Z	40	68	15	1	16.8	11.5	10000	45	47.5	63	1	190
B6208Z		80	18	1.1	29.1	17.9	8500	46.5	50.5	73.5	1	366
B6308Z		90	23	1.5	40.5	24	7500	48	53	82	1.5	636
B6009Z	45	75	16	1	20.9	15.2	9000	50	53.5	70	1	241
B6209Z		85	19	1.1	31.5	20.4	7500	51.5	55.5	78.5	1	420
B6309Z		100	25	1.5	53	32	6700	53	61.5	92	1.5	829
B6010Z	50	80	16	1	21.8	16.6	8500	55	58.5	75	1	261
B6210Z		90	20	1.1	35	23.2	7100	56.5	60	83.5	1	459
B6310Z		110	27	2	62	38.5	6000	59	68	101	2	1060

kgf=Nx0.101972

Products homepage

Basic information

Bearing Ring Shape	Ball	Materials of Inner and Outer Ring	EN 1.3505 Equiv.	Shield material and shape	Single Shielded
Outer Ring Type	Flat	Accuracy (JIS)	Class 0	Specifications/Environment	Standard
Load Direction	Radial	Number of Bearing Ring Rows	Single Track	Size Standard	Metric Series
Rolling Element Material	EN 1.3505 Equiv.	Seal Part Structure	Single Shielded

This page is Deep groove ball bearings / single row / MISUMI, part number B6004Z.
You can find the detail information about specifications and dimensions on part number B6004Z.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- B6000Z
- B6001Z
- B6002Z
- B6003Z
- B6004Z
- B6005Z
- B6006Z
- B6007Z
- B6008Z
- B6009Z
- B6010Z
- B6200Z
- B6201Z
- B6202Z
- B6203Z
- B6204Z
- B6205Z
- B6206Z
- B6207Z
- B6208Z
- B6209Z
- B6210Z
- B6300Z
- B6301Z
- B6302Z
- B6303Z
- B6304Z
- B6305Z
- B6306Z
- B6307Z
- B6308Z
- B6309Z
- B6310Z
Clear
I.D. d(φ)
10

12

15

17

20

25

30

35

40

45

50
Clear
O.D. D(φ)
26

28

30

32

35

37

40

42

47

52

55

62

68

72

75

80

85

90

100

110
Clear
Width B (or T)(mm)
8

9

10

11

12

13

14

15

16

17

18

19

20

21

23

25

27
Clear
Basic Load Rating Cr (Dynamic)(N)
4550

5100

5600

6000

6800

7650

8100

9400

9550

9700

10100

11400

12800

13200

13600

14000

15900

16000

16800

19500

20600

20900

21800

25700

26700

29100

31500

33500

35000

40500

53000

62000
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less

7 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
B6001Z
B6002Z
B6003Z
B6005Z
B6006Z
B6007Z

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
2.89 €	1	Available	5 Days	10	12	28	8	5100	28000	2370
3.27 €	1	Available	5 Days	10	15	32	9	5600	24000	2830
5.11 €	1	Available	5 Days	10	17	35	10	6000	22000	3250
4.16 €	1	Available	5 Days	10	25	47	12	10100	15000	5850
5.04 €	1	Available	Same day Stock	10	30	55	13	13200	13000	8300
6.17 €	1	Available	5 Days	10	35	62	14	16000	11000	10300