Deep groove ball bearings / single row / DDU / stainless / MISUMI (SB6206DDU)

Click on this image to zoom in.

Volume Discount

MISUMI

Product Details:

Manufacturer part number: SB6206DDU

Brand: MISUMI

Price: 23.18 €

Delivery time: 5 Days

Technical Data:

I.D. d: 30 φ

O.D. D: 62 φ

Width B (or T): 16 mm

Basic Load Rating Cr (Dynamic): 16500 N

Allowable Rotational Speed: 7500 1/min

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

SB6206DDU

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Deep Groove/Non-Contact-/Contact Sealed/Stainless Steel:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Ball Bearings

Material: EN 1.4125 Equiv.

For further specifications please see the More information tab.
Information on tolerances and rotational accuracy of the radial bearings can be found in the following PDF: Ball bearing table / tolerances as PDF

Composition of a Product Code - Ball Bearings

Part Number

SB6004DDU

General Information - Ball Bearings

Ball bearing - deep groove ball bearing - axial bearing - axial ball bearing - axial groove ball bearing - angular ball bearing - spherical ball bearing - tension bearing

Ball Bearing Selection Details

- Ball material: steel, stainless steel, ceramic, plastic, glass, chrome-plated

- Type of bearings: axial ball bearings, thin section bearings, spherical ball bearings, deep groove ball bearings, single-row angular ball bearings, double-row ball bearings, tension bearings, four-point bearings

- Outer ring: flat, spherical, with flange, annular groove, U-groove, V-groove

- Properties: heat-resistant, non-magnetic, corrosion-resistant, dust-proof, vacuum, high speed

- Inner diameter: 2 mm to 50 mm

- Outer diameter: 5 mm to 110 mm

Ball bearing designation (suffix):

In addition to the dimensional designation of the ball bearing, ball bearings often also have a designation for a cover disc or sealing disc. The following names are the most common names of various manufacturers that can be selected in the MISUMI online shop.

- Double-sided sealing washer: 2RSH/2RS1, 2RSR/C-2HRS, DDU/DD
- Single-sided sealing washer: RSH/RS1, RSR/C-HRS, DU
- Double-sided sealing washer with low friction: 2RSL/2RZ/VV
- Double-sided cover disc: 2Z/ZZ, 2ZR/C-2Z
- Single sided cover disc: Z, ZR/C-Z/Z

Description/Basics

Rolling bearings

Rolling bearings are generally divided into ball bearings and roller bearings. Ball bearings are a popular type of rolling bearings due to their high permissible speed and low friction.
In the MISUMI online shop, you can purchase ball bearings that can be customized to your applications and environmental conditions. Our ball bearings are available in different materials and in a combination of different materials (hybrid bearings). In addition, MISUMI offers ball bearings already integrated into the housing as bearing housing.

Grooved ball bearings

Grooved ball bearings are the most commonly used rotary rolling bearings. This type of ball bearing is ideally suited for supporting rotating machine elements. A grooved ball bearings are intended for load bearing of radial forces and light axial forces. Grooved ball bearings are designed for high speeds and are used in a wide variety of industrial applications and designs. MISUMI already offers ball bearings integrated into housings and holders as bearing housings.

Areas of Application

Ball bearing - chemical resistance

Chemical resistance		Plastic ball			Metal ball		Ceramic ball
Bearing rings		UHMW	PEEK	PTFE	EN 1.4125 equivalent	EN 1.4301 equivalent	EN 1.4125 equivalent	EN 1.4542 equivalent
Cover plate		-	-	-	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent
Bearing balls		Glass	Ceramic (aluminum oxide)	Ceramic (aluminum oxide)	EN 1.4125 equivalent	EN 1.4301 equivalent	Ceramic	Ceramic
Ball cage		UHMW	PEEK	PTFE	EN 1.4301 equivalent	EN 1.4301 equivalent	Fluoroplastic	Fluoroplastic
Acids	Hydrochloric acid	suitable to a limited extent	good	very good	unsuitable	good	suitable to a limited extent	good
	Sulfuric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
	Nitric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
Bases		unsuitable	very good	very good	unsuitable	very good	good	very good
Solvents		very good	very good	very good	unsuitable	very good	good	very good
Salt water		very good	very good	very good	unsuitable	very good	good	very good
Water		very good	very good	very good	unsuitable	very good	very good	very good

Comparison Table The ball bearing comparison table is provided for comparison purposes only (consider the lubricant and the sealing washer separately).

Ball bearing materials

In the MISUMI online shop, ball bearings are available in cost-effective rolling bearing steel, corrosion-resistant stainless steel and stainless steel. Furthermore, our product range includes various hybrid bearings in the following combinations: metal & ceramic, plastic & ceramic, plastic & glass.

Our various materials offer good resistance to various environmental influences. Our ball bearing shop includes the ball materials stainless steel, steel, UHMW, PEEK, PTFE, ceramic and glass.

Instructions for Use / Installation Information - Ball Bearings

Installation Information

An incorrect assembly and disassembly can damage a ball bearing. Therefore, a suitable tool must always be used to assemble and disassemble ball bearings or roller bearings.
Ball bearings should not be assembled with a hammer, as this can deform the ball bearing. It is recommended using a suitable press. During pressing, the contact surface can be provided with lubricant to protect the surfaces and facilitate assembly.
It is best to use a bearing puller for disassembly.

Maintenance

The ball bearing in roller bearings should be inspected for damage during maintenance.
Before regreasing, a ball bearing should first be thoroughly cleaned.
Remaining contamination in the bearing can damage the ball bearing. As a rule, a ball bearing should not be completely filled with grease, as this can cause the bearing to heat up too much and can cause it to fail.
For encapsulated and sealed ball bearings, it is recommended to replace the bearing. Maintenance is not recommended due to the risk of damage to the cover place or seal.

Supplementary Article

Bearing Lock Nuts

Shaft nuts - lock nuts - steel shaft nut - stainless steel shaft nut - shaft with retaining nut - shaftnNut with clamp screw - shaft nut with grub screw - shaft assembly

Bearings with Housing

Bearing with housing - bearing housing - bearing units - ball bearing holder - ball bearing with housing - bearing housing with flange - shaft holder with ball bearing

Axles / Rotary Shafts

Rotary axis - offset rotary shaft - double offset shaft - female threaded shaft - keyway shaft

Drive shafts

Motor shaft - torsion shaft - shaft with collar - shaft with shoulder - offset shaft - keyway shaft

Plain Bearing (Bushes)

Plain bearing - maintenance free - plain bearing bushings - plain bearing bushing with collar - plain bearing bushing with flange - plastic bushing - plastic plain bearing bushing

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SB6206DDU

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
	23.18 €	1	Available	5 Days	10	30	62	16	16500	7500	9050

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Specification Tables - Ball Bearings

Part Number	d	D	B	r (min)	Basic Load Rating		Allowable Rotational Speed rpm (Reference)	Relative Dimensions				Mass (g) (Reference)	Unit Price
					Cr (Dynamic) kN	Co (Static) kN		Ds		dh (max)	R (max)
					Cr (Dynamic) kN	Co (Static) kN		(min)	(max)	dh (max)	R (max)
SB6000DDU	10	26	8	0.3	3.9	1.58	22000	12	13	24	0.3	18
SB6200DDU	10	30	9	0.6	4.35	1.91	18000	14	16	26	0.6	32
SB6001DDU	12	28	8	0.3	4.35	1.89	18000	14	15.5	26	0.3	22
SB6201DDU	12	32	10	0.6	5.8	2.44	17000	16	17	28	0.6	37
SB6002DDU	15	32	9	0.3	4.75	2.27	15000	17	19	30	0.3	31
SB6202DDU	15	35	11	0.6	6.5	2.98	14000	19	20.5	31	0.6	45
SB6003DDU	17	35	10	0.3	5.1	2.6	13000	19	21.5	33	0.3	41
SB6203DDU	17	40	12	0.6	8.15	3.85	12000	21	23.5	36	0.6	67
SB6004DDU	20	42	12	0.6	7.95	4	11000	24	25.5	38	0.6	68
SB6204DDU	20	47	14	1	10.9	5.25	11000	25	26.5	42	1	107
SB6005DDU	25	47	12	0.6	8.55	4.65	9500	29	30	43	0.6	79
SB6205DDU	25	52	15	1	11.9	6.3	9000	30	32	47	1	129
SB6006DDU	30	55	13		11.3	6.6	8000	35	36.5	50		116
SB6206DDU	30	62	16		16.5	9.05	7500	35	38.5	57		199
SB6007DDU	35	62	14		13.6	8.2	6700	40	41.5	57		151
SB6207DDU	35	72	17	1.1	21.8	12.2	6300	41.5	44.5	65.5		284
SB6008DDU	40	68	15	1	14.2	9.25	6000	45	47.5	63		190
SB6208DDU	40	80	18	1.1	24.8	14.3	5600	46.5	50.5	73.5		366

kgf=Nx0.101972

Products homepage

Basic information

Bearing Ring Shape	Ball	Materials of Inner and Outer Ring	EN 1.4125 Equiv.	Shield material and shape	Rubber Sealed
Outer Ring Type	Flat	Accuracy (JIS)	Class 0	Specifications/Environment	Standard / Dust Resistant
Load Direction	Radial	Number of Bearing Ring Rows	Single Track	Size Standard	Metric Series
Rolling Element Material	EN 1.4125 Equiv.	Seal Part Structure	Contact Sealed

This page is Deep groove ball bearings / single row / DDU / stainless / MISUMI, part number SB6206DDU.
You can find the detail information about specifications and dimensions on part number SB6206DDU.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- SB6000DDU
- SB6001DDU
- SB6002DDU
- SB6003DDU
- SB6004DDU
- SB6005DDU
- SB6006DDU
- SB6007DDU
- SB6008DDU
- SB6200DDU
- SB6201DDU
- SB6202DDU
- SB6203DDU
- SB6204DDU
- SB6205DDU
- SB6206DDU
- SB6207DDU
- SB6208DDU
Clear
I.D. d(φ)
10

12

15

17

20

25

30

35

40
Clear
O.D. D(φ)
26

28

30

32

35

40

42

47

52

55

62

68

72

80
Clear
Width B (or T)(mm)
8

9

10

11

12

13

14

15

16

17

18
Clear
Basic Load Rating Cr (Dynamic)(N)
3900

4350

4750

5100

5800

6500

7950

8150

8550

10900

11300

11900

13600

14200

16500

21800

24800
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
SB6002DDU
SB6003DDU
SB6004DDU
SB6005DDU
SB6207DDU
SB6208DDU

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
7.56 €	1	Available	Same day Stock	10	15	32	9	4750	15000	2270
9.06 €	1	Available	5 Days	10	17	35	10	5100	13000	2600
11.46 €	1	Available	Same day Stock	10	20	42	12	7950	11000	4000
12.22 €	1	Available	5 Days	10	25	47	12	8550	9500	4650
26.33 €	1	Available	5 Days	10	35	72	17	21800	6300	12200
38.79 €	1	Available	5 Days	10	40	80	18	24800	5600	14300