Pneumatic Module Units Vertical / Linear Bushings Type
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
- Technical Information
■Components
| Parts | Base | Slider | Related Connecting Parts |
| Material | EN AW-6063 Equiv. | EN AW-6063 Equiv. | Stainless Steel |
| Surface Treatment | Clear Anodize | Clear Anodize | - |
2) Compatible cylinder diameters are Ø25, Ø32, Ø40, Ø50 and Ø63.
3) MAT25 is the only option for S Type. (MAT25(S))
4) S Type shaft diameter is Ø16. (See the Components List below.)
Specifications
| Part Number | - | S | - | P | - | L |
| MAT25NN | - | 30 | - | 120 | - | 180 |
■Specifications List
| Part Number | Specifications | ||
| Type | No. | Cylinder | Base |
| MAT25 MAT32 MAT40 MAT50 MAT63 | NN(S) | N (w/o) | N (w/o) |
| NB(S) | N (w/o) | B (w/) | |
| CN(S) | C (w/) | N (w/o) | |
| CB(S) | C (w/) | B (w/) | |
■Module Components
For the components above, please confirm the details on the listed catalog pages.
■Mass
| Part Number | Component Name | |||||||
| Type | No. | Cylinder | Linear Shaft | Floating Joint | Linear Bushing | Retaining Ring | Shaft Collar | Stand Bracket |
| MAT25 | NNS, NBS | - | PSFJZ16 (Shaft Dia. 16) | FJUCS10 | LMU16 | RTWS28 | SSCSPDJ16 | PFPM16 |
| CNS, CBS | MSCCA25 | |||||||
| NN, NB | - | PSFJZ20 (Shaft Dia. 20) | LMU20 | RTWS32 | SSCSPDJ20 | PFPM20 | ||
| CN, CB | MSCCA25 | |||||||
| MAT32 | NN, NB | - | PSFJZ25 (Shaft Dia. 25) | FJUCS14 | LMU25 | RTWS40 | SSCSPDJ25 | PFPM25 |
| CN, CB | MSCCA32 | |||||||
| MAT40 | NN, NB | - | ||||||
| CN, CB | MSCCA40 | |||||||
| MAT50 | NN, NB | - | FJUCS18 | |||||
| CN, CB | MSCCA50 | |||||||
| MAT63 | NN, NB | - | ||||||
| CN, CB | MSCCA63 | |||||||
| Pages on Catalog | P.2-1485 | P.135 | P.2-1540 | P.315 | P.2-265 | P.273 | P.2154 | |
| Part Number | Selection | CB | C | CP | Cm | Cd | Slider Dimension | Stand Mounting Dimension | Base Dimension (When With Base Type is selected) | SD | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type | No. | S | P | L (10mm Increment) | SB | d | f | w | t3 | D1 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MAT25 | NN(S) | 30 50 | 120 150 200 Only 120 at the time of S selection | 120~300 (S=30) 160~300 (S=50) When MAT25 (S) is selected 120~250 (S=30) 160~250 (S=50) | 17 | - | 28 | 5 | - | 50 |
| When MAT25 (S) is selected |
| 12 | 6.6 | 40 Only 120 at the time of S selection 35 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NB(S) | - | - | 5.5 | 32 | 20 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CN(S) | 32.5 | M5 | When MAT25 is selected | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CB(S) | 6.6 | 35 | 25 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MAT32 | NN | 150 200 | 27 | - | 34 | 5 | - | 68 | 9 | 45 | 35 | 9 | 45 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NB | - | - | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CN | 33 | Rc1/8 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CB | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MAT40 | NN | - | 40 | 6 | - | 68 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NB | - | - | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CN | 39.5 | Rc1/8 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CB | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MAT50 | NN | 200 | 32 | - | 50 | 8 | - | 72 | 15 | 11 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NB | - | - | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CN | 40.5 | Rc1/4 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CB | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MAT63 | NN | - | 60 | 10 | - | 72 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NB | - | - | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CN | 46 | Rc1/4 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CB | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
■Mass
| Part Number | Mass (kg) | ||||||||||||||||
| Type | No. | Cylinder Stroke S=30 | Cylinder Stroke S=50 | ||||||||||||||
| L=120~200 | L=210~250 | L=260~300 | L=160~200 | L=210~250 | L=260~300 | ||||||||||||
| P Slider Pitch | P Slider Pitch | P Slider Pitch | P Slider Pitch | P Slider Pitch | P Slider Pitch | ||||||||||||
| 120 | 150 | 200 | 120 | 150 | 200 | 150 | 200 | 120 | 150 | 200 | 120 | 150 | 200 | 150 | 200 | ||
| MAT25 | NNS | 2.2 | - | - | 2.3 | - | - | - | - | 2.2 | - | - | 2.3 | - | - | - | - |
| NBS | 2.5 | - | - | 2.7 | - | - | - | - | 2.5 | - | - | 2.7 | - | - | - | - | |
| CNS | 2.5 | - | - | 2.6 | - | - | - | - | 2.6 | - | - | 2.7 | - | - | - | - | |
| CBS | 2.9 | - | - | 3.0 | - | - | - | - | 3.0 | - | - | 3.1 | - | - | - | - | |
| NN | 2.7 | 3.1 | 3.8 | 3.0 | 3.4 | 4.0 | 3.6 | 4.3 | 2.7 | 3.1 | 3.8 | 3.0 | 3.4 | 4.0 | 3.6 | 4.3 | |
| NB | 3.1 | 3.8 | 4.5 | 3.4 | 4.0 | 4.8 | 4.2 | 5.0 | 3.1 | 3.8 | 4.5 | 3.4 | 4.0 | 4.8 | 4.2 | 5.0 | |
| CN | 3.1 | 3.5 | 4.1 | 3.3 | 3.7 | 4.3 | 3.9 | 4.6 | 3.1 | 3.5 | 4.2 | 3.4 | 3.8 | 4.4 | 4.0 | 4.7 | |
| CB | 3.5 | 4.1 | 4.9 | 3.7 | 4.3 | 5.1 | 4.6 | 5.4 | 3.5 | 4.2 | 4.9 | 3.8 | 4.4 | 5.2 | 4.7 | 5.4 | |
| MAT32 | NN | - | 5.0 | 5.9 | - | 5.4 | 6.3 | 5.8 | 6.7 | - | 5.0 | 5.9 | - | 5.4 | 6.3 | 5.8 | 6.7 |
| NB | - | 5.8 | 6.8 | - | 6.2 | 7.1 | 6.5 | 7.5 | - | 5.8 | 6.8 | - | 6.2 | 7.1 | 6.5 | 7.5 | |
| CN | - | 5.5 | 6.4 | - | 5.9 | 6.7 | 6.3 | 7.1 | - | 5.6 | 6.5 | - | 6.0 | 6.8 | 6.4 | 7.2 | |
| CB | - | 6.2 | 7.2 | - | 6.6 | 7.6 | 7.0 | 8.0 | - | 6.3 | 7.3 | - | 6.7 | 7.7 | 7.1 | 8.1 | |
| MAT40 | NN | - | 5.0 | 5.9 | - | 5.4 | 6.3 | 5.8 | 6.7 | - | 5.0 | 5.9 | - | 5.4 | 6.3 | 5.8 | 6.7 |
| NB | - | 5.8 | 6.8 | - | 6.1 | 7.1 | 6.5 | 7.5 | - | 5.8 | 6.8 | - | 6.1 | 7.1 | 6.5 | 7.5 | |
| CN | - | 5.5 | 6.4 | - | 5.9 | 6.8 | 6.3 | 7.2 | - | 5.6 | 6.5 | - | 6.0 | 6.9 | 6.4 | 7.3 | |
| CB | - | 6.3 | 7.3 | - | 6.6 | 7.6 | 7.0 | 8.0 | - | 6.4 | 7.4 | - | 6.7 | 7.7 | 7.1 | 8.1 | |
| MAT50 | NN | - | - | 6.6 | - | - | 7.0 | - | 7.4 | - | - | 6.6 | - | - | 7.0 | - | 7.4 |
| NB | - | - | 7.9 | - | - | 8.3 | - | 8.7 | - | - | 7.9 | - | - | 8.3 | - | 8.7 | |
| CN | - | - | 7.3 | - | - | 7.7 | - | 8.0 | - | - | 7.5 | - | - | 7.9 | - | 8.3 | |
| CB | - | - | 8.6 | - | - | 8.9 | - | 9.3 | - | - | 8.8 | - | - | 9.2 | - | 9.6 | |
| MAT63 | NN | - | - | 6.6 | - | - | 7.0 | - | 7.4 | - | - | 6.6 | - | - | 7.0 | - | 7.4 |
| NB | - | - | 7.9 | - | - | 8.3 | - | 8.7 | - | - | 7.7 | - | - | 8.3 | - | 8.7 | |
| CN | - | - | 7.7 | - | - | 8.1 | - | 8.5 | - | - | 7.9 | - | - | 8.2 | - | 8.6 | |
| CB | - | - | 9.0 | - | - | 9.4 | - | 9.8 | - | - | 9.2 | - | - | 8.5 | - | 9.9 | |
■Accuracy
1) Measurement reference is Axis A.
2) Mount the load on the surface "e", apply a 3kg mass at 70mm from the shaft center, and measure.
3) Accuracy does not vary by difference in cylinder stroke.
4) Running parallelism values are for reference only.
| Part Number | Running Parallelism to Reference Axis (Upright) | |||||
| Type | Under No Load | Under Load (Reference) | ||||
| Slider Pitch | Slider Pitch | |||||
| 120 | 150 | 200 | 120 | 150 | 200 | |
| MAT25(S) | 0.07 | - | - | 0.08 | - | - |
| MAT25 | 0.07 | 0.07 | 0.07 | 0.10 | 0.10 | 0.10 |
| MAT32 | - | 0.07 | 0.07 | - | 0.10 | 0.10 |
| MAT40 | - | 0.07 | 0.07 | - | 0.10 | 0.10 |
| MAT50 | - | - | 0.07 | - | - | 0.10 |
| MAT63 | - | - | 0.07 | - | - | 0.10 |
2) Mount the load on the surface "e", apply a 3kg mass at 70mm from the shaft center, and measure.
3) Accuracy does not vary by difference in cylinder stroke.
4) Running parallelism values are for reference only.
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number | Minimum order quantity | Volume Discount | Load Capacity (Range) (N) | L (mm) | Cylinders | Base | Cylinder Bore Dia. (Ø) | Linear Shaft Dia. (Ø) | Slider Pitch [P] (mm) | Stroke [S] (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | B (w/) | 32 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | N (w/o) | 32 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 18 Days | 100.1 or More | 120 ～ 300 | N (w/o) | B (w/) | 32 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | N (w/o) | 32 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 18 Days | 100.1 or More | 120 ～ 300 | C (w/) | B (w/) | 40 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | N (w/o) | 40 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | B (w/) | 40 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 18 Days | 100.1 or More | 120 ～ 300 | N (w/o) | N (w/o) | 40 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | B (w/) | 50 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | N (w/o) | 50 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | B (w/) | 50 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | N (w/o) | 50 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | B (w/) | 63 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | N (w/o) | 63 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | B (w/) | 63 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | N (w/o) | 63 | 25 | 200 | 30 ～ 50 |
Loading...
More Information
Basic information
| Feeding Method | Air Pressure | Table Size (Length) L(mm) | 60 | Table Size (Width) W(mm) | 130 |
|---|---|---|---|---|---|
| Table Material | EN AW-6063 Equiv. | Table Surface Treatment | Clear Anodized Aluminum |
Configure
Basic Attributes
-
L(mm)
-
Cylinders
- C (w/)
- N (w/o)
-
Base
- B (w/)
- N (w/o)
-
Cylinder Bore Dia.(Ø)
- 25
- 32
- 40
- 50
- 63
-
Linear Shaft Dia.(Ø)
- 16
- 20
- 25
-
Slider Pitch [P](mm)
-
Stroke [S](mm)
-
Type
- MAT
-
Load Capacity (Range)(N)
- 50.1 to 100
- 100.1 or More
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 17 Days or Less
- 18 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Ball Valves / Stainless Steel / PT Female / PF(G) Female
MISUMI Standard Price : 29.47 € Shipping Days: 5 Days
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.