Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread (Part Numbers - CAD Download)

View the FAQ (10)

MISUMI

Order quantities extended (D-JIT)

(i)Remark

SFAD has been localized according to European needs and requirements. Please have a look on the EU version SFADEU. SFADEU is available in EN 1.1213 (Cf53) and h6 / h7.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

One End Threaded/One End Tapped:Related Image

Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

Type			Material	Hardness	Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	Material	Hardness	Surface Treatment
SFAD	SFUD	-	EN 1.3505 Equiv.	Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4037 Equiv. 56HRC~	-
SSFAD	SSFUD	-	EN 1.4037 Equiv.		-
PSFAD	PSFUD	-	EN 1.3505 Equiv.		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More
PSSFAD	PSSFUD	-	EN 1.4037 Equiv.
RSFAD	-	-	EN 1.3505 Equiv.		LTBC Plating
-	-	PSFGD	EN 1.1191 Equiv.	-	Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More
-	-	PSSFGD	EN 1.4301 Equiv.	-

Further specifications can be found under the tab More Information.

Composition of a Product Code - Linear Shafts

Part Number	-	L	-	F	-	B	-	P	-	N
SFAD20	-	277	-	F25	-	B12	-	P10	-	N12

Alterations - Linear Shafts

One End Threaded/One End Tapped:Related Image

You find further options in detail under Option Overview.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
PSFUD15-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMC[5,6,8,10]-ND[6,8,10]
PSFUD15-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMC[5,6,8,10]-NSC[8,10]
PSFUD15-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMS[10,12,14]-N[4,5,6,8]
PSFUD15-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMS[10,12,14]-ND[6,8,10]
PSFUD15-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMS[10,12,14]-NSC[8,10]
PSFUD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10]-N[4,5,6,8]
PSFUD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10]-ND[6,8,10]
PSFUD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10]-NSC[8,10]
PSFUD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10]-N[4,5,6,8]
PSFUD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10]-ND[6,8,10]
PSFUD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10]-NSC[8,10]
PSFUD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14]-N[4,5,6,8]
PSFUD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14]-ND[6,8,10]
PSFUD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14]-NSC[8,10]
PSFUD18-[25-1398/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10,12]
PSFUD18-[25-1398/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10,12,16]-ND[6,8,10,12]
PSFUD18-[25-1398/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10,12,16]-NSC[8,10,12]
PSFUD18-[25-1398/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10,12,15,17]-N[4,5,6,8,10,12]
PSFUD18-[25-1398/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10,12,15,17]-ND[6,8,10,12]
PSFUD18-[25-1398/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10,12,15,17]-NSC[8,10,12]
PSFUD18-[25-1398/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12]
PSFUD18-[25-1398/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14,18]-ND[6,8,10,12]
PSFUD18-[25-1398/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14,18]-NSC[8,10,12]
PSFUD20-[25-1198/1]-F[2-140/1]-B[0-140/1]-P[6,8,10,12]-N[4,5,6,8]
PSFUD20-[25-1198/1]-F[2-140/1]-B[0-140/1]-P[6,8,10,12]-ND[6,8,10,12]
PSFUD20-[25-1198/1]-F[2-140/1]-B[0-140/1]-P[6,8,10,12]-NSC[8,10,12,14]
PSFUD20-[25-1198/1]-F[2-140/1]-B[0-140/1]-PMC[6,8,10,12,20]-N[4,5,6,8]
PSFUD20-[25-1198/1]-F[2-140/1]-B[0-140/1]-PMC[6,8,10,12,20]-ND[6,8,10,12]
PSFUD20-[25-1198/1]-F[2-140/1]-B[0-140/1]-PMC[6,8,10,12,20]-NSC[8,10,12,14]
PSFUD20-[25-1198/1]-F[2-140/1]-B[0-140/1]-PMS[10,12,14,18]-N[4,5,6,8]
PSFUD20-[25-1198/1]-F[2-140/1]-B[0-140/1]-PMS[10,12,14,18]-ND[6,8,10,12]
PSFUD20-[25-1198/1]-F[2-140/1]-B[0-140/1]-PMS[10,12,14,18]-NSC[8,10,12,14]
PSFUD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-P[8,10,12,16,20,24]-N[4,5,6,8,10,12,16]
PSFUD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-P[8,10,12,16,20,24]-ND[6,8,10,12,16]
PSFUD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-P[8,10,12,16,20,24]-NSC[8,10,12,14,18]
PSFUD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMC[8,10,12,15,17,20,25]-N[4,5,6,8,10,12,16]
PSFUD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMC[8,10,12,15,17,20,25]-ND[6,8,10,12,16]
PSFUD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMC[8,10,12,15,17,20,25]-NSC[8,10,12,14,18]
PSFUD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12,16]
PSFUD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMS[10,12,14,18]-ND[6,8,10,12,16]
PSFUD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]
PSFUD30-[25-1498/1]-F[2-210/1]-B[0-205/1]-P[8,10,12,16,20,24,30]-N[6,8,10,12,16,20]
PSFUD30-[25-1498/1]-F[2-210/1]-B[0-205/1]-P[8,10,12,16,20,24,30]-ND[6,8,10,12,16,20]
PSFUD30-[25-1498/1]-F[2-210/1]-B[0-205/1]-P[8,10,12,16,20,24,30]-NSC[8,10,12,14,18]
PSFUD30-[25-1498/1]-F[2-210/1]-B[0-205/1]-PMC[8,10,12,15,17,20,25,30]-N[6,8,10,12,16,20]
PSFUD30-[25-1498/1]-F[2-210/1]-B[0-205/1]-PMC[8,10,12,15,17,20,25,30]-ND[6,8,10,12,16,20]
PSFUD30-[25-1498/1]-F[2-210/1]-B[0-205/1]-PMC[8,10,12,15,17,20,25,30]-NSC[8,10,12,14,18]
PSFUD30-[25-1498/1]-F[2-210/1]-B[0-205/1]-PMS[10,12,14,18]-N[6,8,10,12,16,20]
PSFUD30-[25-1498/1]-F[2-210/1]-B[0-205/1]-PMS[10,12,14,18]-ND[6,8,10,12,16,20]
PSFUD30-[25-1498/1]-F[2-210/1]-B[0-205/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]
PSFUD35-[30-1498/1]-F[2-210/1]-B[0-205/1]-P[10,12,16,20,24,30]-N[8,10,12,16,20,24]
PSFUD35-[30-1498/1]-F[2-210/1]-B[0-205/1]-P[10,12,16,20,24,30]-NSC[8,10,12,14,18]
PSFUD35-[30-1498/1]-F[2-210/1]-B[0-205/1]-PMC[10,12,15,17,20,25,30]-N[8,10,12,16,20,24]
PSFUD35-[30-1498/1]-F[2-210/1]-B[0-205/1]-PMC[10,12,15,17,20,25,30]-NSC[8,10,12,14,18]
PSFUD35-[30-1498/1]-F[2-210/1]-B[0-205/1]-PMS[10,12,14,18]-N[8,10,12,16,20,24]
PSFUD35-[30-1498/1]-F[2-210/1]-B[0-205/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]
PSFUD40-[40-1498/1]-F[2-210/1]-B[0-205/1]-P[12,16,20,24,30]-N[10,12,16,20,24,30]
PSFUD40-[40-1498/1]-F[2-210/1]-B[0-205/1]-P[12,16,20,24,30]-NSC[10,12,14,18]
PSFUD40-[40-1498/1]-F[2-210/1]-B[0-205/1]-PMC[12,15,17,20,25,30]-N[10,12,16,20,24,30]
PSFUD40-[40-1498/1]-F[2-210/1]-B[0-205/1]-PMC[12,15,17,20,25,30]-NSC[10,12,14,18]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	[D] Diameter (Shaft) (mm)	[L] Length (Shaft) (mm)	Material	Heat Treatment	Surface Treatment	ISO Tolerance	Hardness	[B] Length (thread) (mm)	[NSC] Size (fine thread - depth 2xN) (mm)	[ND] Size (thread - depth 3xN) (mm)	[F] Length (stud - offset - front side) (mm)	[PMC] Size (fine thread) (mm)	[PMS] Size (fine thread) (mm)	[P] Diameter (stepped - front side) (mm)	[N] Size (thread - depth 2xN) (mm)
-	1	4 Days	10	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 79	-	6 ～ 10	2 ～ 84	5 ～ 10	-	-	-
-	1	4 Days	10	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 79	8 ～ 10	-	2 ～ 84	5 ～ 10	-	-	-
-	1	4 Days	10	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 79	-	-	2 ～ 84	-	10 ～ 14	-	4 ～ 8
-	1	4 Days	10	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 79	-	6 ～ 10	2 ～ 84	-	10 ～ 14	-	-
-	1	4 Days	10	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 79	8 ～ 10	-	2 ～ 84	-	10 ～ 14	-	-
-	1	4 Days	10	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	-	2 ～ 112	-	-	5 ～ 10	4 ～ 8
-	1	4 Days	10	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	6 ～ 10	2 ～ 112	-	-	5 ～ 10	-
-	1	4 Days	10	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	8 ～ 10	-	2 ～ 112	-	-	5 ～ 10	-
-	1	4 Days	10	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	-	2 ～ 112	5 ～ 10	-	-	4 ～ 8
-	1	4 Days	10	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	6 ～ 10	2 ～ 112	5 ～ 10	-	-	-
-	1	4 Days	10	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	8 ～ 10	-	2 ～ 112	5 ～ 10	-	-	-
-	1	4 Days	10	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	-	2 ～ 112	-	10 ～ 14	-	4 ～ 8
-	1	4 Days	10	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	6 ～ 10	2 ～ 112	-	10 ～ 14	-	-
-	1	4 Days	10	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	8 ～ 10	-	2 ～ 112	-	10 ～ 14	-	-
-	1	7 Days	10	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	-	2 ～ 112	-	-	5 ～ 16	4 ～ 12
-	1	7 Days	10	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	6 ～ 12	2 ～ 112	-	-	5 ～ 16	-
-	1	7 Days	10	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	8 ～ 12	-	2 ～ 112	-	-	5 ～ 16	-
-	1	7 Days	10	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	-	2 ～ 112	5 ～ 17	-	-	4 ～ 12
-	1	7 Days	10	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	6 ～ 12	2 ～ 112	5 ～ 17	-	-	-
-	1	7 Days	10	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	8 ～ 12	-	2 ～ 112	5 ～ 17	-	-	-
-	1	7 Days	10	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	-	2 ～ 112	-	10 ～ 18	-	4 ～ 12
-	1	7 Days	10	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	-	6 ～ 12	2 ～ 112	-	10 ～ 18	-	-
-	1	7 Days	10	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 107	8 ～ 12	-	2 ～ 112	-	10 ～ 18	-	-
-	1	4 Days	10	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 140	-	-	2 ～ 140	-	-	6 ～ 12	4 ～ 8
-	1	4 Days	10	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 140	-	6 ～ 12	2 ～ 140	-	-	6 ～ 12	-
-	1	4 Days	10	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 140	8 ～ 14	-	2 ～ 140	-	-	6 ～ 12	-
-	1	4 Days	10	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 140	-	-	2 ～ 140	6 ～ 20	-	-	4 ～ 8
-	1	4 Days	10	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 140	-	6 ～ 12	2 ～ 140	6 ～ 20	-	-	-
-	1	4 Days	10	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 140	8 ～ 14	-	2 ～ 140	6 ～ 20	-	-	-
-	1	4 Days	10	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 140	-	-	2 ～ 140	-	10 ～ 18	-	4 ～ 8
-	1	4 Days	10	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 140	-	6 ～ 12	2 ～ 140	-	10 ～ 18	-	-
-	1	4 Days	10	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 140	8 ～ 14	-	2 ～ 140	-	10 ～ 18	-	-
-	1	4 Days	10	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 163	-	-	2 ～ 168	-	-	8 ～ 24	4 ～ 16
-	1	4 Days	10	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 163	-	6 ～ 16	2 ～ 168	-	-	8 ～ 24	-
-	1	4 Days	10	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 163	8 ～ 18	-	2 ～ 168	-	-	8 ～ 24	-
-	1	4 Days	10	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 163	-	-	2 ～ 168	8 ～ 25	-	-	4 ～ 16
-	1	4 Days	10	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 163	-	6 ～ 16	2 ～ 168	8 ～ 25	-	-	-
-	1	4 Days	10	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 163	8 ～ 18	-	2 ～ 168	8 ～ 25	-	-	-
-	1	4 Days	10	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 163	-	-	2 ～ 168	-	10 ～ 18	-	4 ～ 16
-	1	4 Days	10	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 163	-	6 ～ 16	2 ～ 168	-	10 ～ 18	-	-
-	1	4 Days	10	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 163	8 ～ 18	-	2 ～ 168	-	10 ～ 18	-	-
-	1	4 Days	10	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	-	2 ～ 210	-	-	8 ～ 30	6 ～ 20
-	1	4 Days	10	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	6 ～ 20	2 ～ 210	-	-	8 ～ 30	-
-	1	4 Days	10	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	8 ～ 18	-	2 ～ 210	-	-	8 ～ 30	-
-	1	4 Days	10	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	-	2 ～ 210	8 ～ 30	-	-	6 ～ 20
-	1	4 Days	10	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	6 ～ 20	2 ～ 210	8 ～ 30	-	-	-
-	1	4 Days	10	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	8 ～ 18	-	2 ～ 210	8 ～ 30	-	-	-
-	1	4 Days	10	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	-	2 ～ 210	-	10 ～ 18	-	6 ～ 20
-	1	4 Days	10	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	6 ～ 20	2 ～ 210	-	10 ～ 18	-	-
-	1	4 Days	10	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	8 ～ 18	-	2 ～ 210	-	10 ～ 18	-	-
-	1	7 Days	10	35	30 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	-	2 ～ 210	-	-	10 ～ 30	8 ～ 24
-	1	7 Days	10	35	30 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	8 ～ 18	-	2 ～ 210	-	-	10 ～ 30	-
-	1	7 Days	10	35	30 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	-	2 ～ 210	10 ～ 30	-	-	8 ～ 24
-	1	7 Days	10	35	30 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	8 ～ 18	-	2 ～ 210	10 ～ 30	-	-	-
-	1	7 Days	10	35	30 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	-	2 ～ 210	-	10 ～ 18	-	8 ～ 24
-	1	7 Days	10	35	30 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	8 ～ 18	-	2 ～ 210	-	10 ～ 18	-	-
-	1	7 Days	10	40	40 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	-	2 ～ 210	-	-	12 ～ 30	10 ～ 30
-	1	7 Days	10	40	40 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	10 ～ 18	-	2 ～ 210	-	-	12 ～ 30	-
-	1	7 Days	10	40	40 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	-	-	2 ～ 210	12 ～ 30	-	-	10 ～ 30
-	1	7 Days	10	40	40 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (58HRC~)	0 ～ 205	10 ～ 18	-	2 ～ 210	12 ～ 30	-	-	-

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

Specification Tables - Linear Shafts

Overview of the shaft designs as PDF

Part Number			1mm Increment			P (Coarse) Selection											N (Coarse) Selection													D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P (Coarse) Selection											N (Coarse) Selection													g6	h5	f8	(Y)Max.	R	C
(D Tolerance g6) SFAD SSFAD PSFAD PSSFAD (D Tolerance f8) PSFGD PSSFGD	(D Tolerance h5) SFUD SSFUD PSFUD PSSFUD	4	25~298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 B≥Pitchx3	3	4										2													-0.004 -0.012	0 -0.005	-	300	0.2 or Less	0.2 or Less
		5	25~398			3	4	5										2.6	3											-0.004 -0.012	0 -0.005	-	400	0.2 or Less	0.2 or Less
		6	25~598			3	4	5	6										3											-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~798			3	4	5	6	8									3	4	5									-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~798				4	5	6	8	10								3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~998					5	6	8	10	12								4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~998					5	6	8	10	12								4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~998					5	6	8	10	12								4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1198					5	6	8	10	12	16							4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1198					5	6	8	10	12	16							4	5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1198						6	8	10	12	16	20						4	5	6	8	10	12					-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1198							8	10	12	16	20	24					4	5	6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1498							8	10	12	16	20	24	30						6	8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1498								10	12	16	20	24	30							8	10	12	16	20	24		-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	40~1498									12	16	20	24	30								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	50~1498										16	20	24	30									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number		1mm Increment			P (Coarse) Selection											N (Coarse) Selection											D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P (Coarse) Selection											N (Coarse) Selection											g6	(Y)Max.	R	C
(D Tolerance g6) LTBC Plating RSFAD	4	25~298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 B≥Pitchx3	3	4										2											-0.004 -0.012	300	0.2 or Less	0.2 or Less
	5	25~398			3	4	5										2.6	3									-0.004 -0.012	400	0.2 or Less	0.2 or Less
	6	25~500			3	4	5	6										3									-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6	8									3	4	5							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8	10								3	4	5	6						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10	12								4	5	6	8					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12								4	5	6	8					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12								4	5	6	8	10				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12	16							4	5	6	8	10				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16							4	5	6	8	10	12			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16	20						4	5	6	8	10	12			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24					4	5	6	8	10	12	16		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	30						6	8	10	12	16	20	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Coarse Thread Dimension
M	Pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Overall length L requires Nx3≤L.
When D=P, specify F=B as B dimensions. However, L and F dimensions have manufacturing priority and B dimension of the product will be F -(Pitchx2).

Alterations - Linear Shafts

One End Threaded/One End Tapped:Related Image

You find further options in detail under Option Overview.

Products homepage

Basic information

Basic Shape	Solid	Shaft end Shape (Left)	External thread	Shaft end Shape (Right)	Internal thread
Shaft end Perpendicularity	0.2

Configure

1,118Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

[D] Diameter (Shaft)(mm)
4

5

6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
[L] Length (Shaft)(mm)
[25-1498/1mm Unit(s)]
Clear
Material
- Unalloyed Steel
  - EN 1.1191 Equiv.
- Stainless Steel (austenitic)
  - EN 1.4301 Equiv.
- Alloyed Steel
  - EN 1.3505 Equiv.
- Stainless Steel (martensitique)
  - EN 1.4037 Equiv.
Clear
Heat Treatment
- No Treatment
- Induction Hardened
Clear
Surface Treatment
- No Treatment
- Hard Chrome Plating
- LTBC Plating
Clear
ISO Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardening (56HRC~)
- Induction Hardening (58HRC~)
- No Induction Hardening
Clear
[B] Length (thread)(mm)
[0-210/1mm Unit(s)]
Clear
[NSC] Size (fine thread - depth 2xN)(mm)
8

10

12

14

18
Clear
[ND] Size (thread - depth 3xN)(mm)
6

8

10

12

16

20
Clear
[F] Length (stud - offset - front side)(mm)
[2-210/1mm Unit(s)]
Clear
[PMC] Size (fine thread)(mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
[PMS] Size (fine thread)(mm)
10

12

14

18
Clear
[P] Diameter (stepped - front side)(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
[N] Size (thread - depth 2xN)(mm)
2

2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
Type
- PSFAD
- PSFGD
- PSFUD
- PSSFAD
- PSSFGD
- PSSFUD
- RSFAD
- SFAD
- SFUD
- SSFAD
- SSFUD
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

4 Days or Less

6 Days or Less

7 Days or Less

10 Days or Less

12 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
What is the difference between a hollow shaft and a solid shaft?: Answer:
With the same size, there are three differences between a hollow shaft and a solid shaft. Hollow shafts weigh less. The inner cavity of a hollow shaft is suitable for use as a channel (cable channel). Solid shafts are a bit more rigid (higher resistance torque).
Question:
What is the minimum order of linear shafts from MISUMI?: Answer:
MISUMI supplies solid shafts, hollow shafts and precision shafts starting at a lot size of 1. This also applies to all other items in our product range.
Question:
Noises and vibrations occur with a linear shaft. In addition, there are jerky movements. What could cause this?: Answer:
In general, it may be caused if the steel shaft is not properly lubricated. In addition, an incorrectly selected diameter tolerance of the linear shafts may also make the cycle of motion more difficult. When using MISUMI linear ball bearings, a g6 shaft tolerance is recommended (tolerance recommendations may vary depending on the manufacturer).
Question:
What is the strength of a solid shaft?: Answer:
The strength of a linear shaft, although it is a solid shaft, hollow shaft or precision shaft, should always be selected in consideration of the strength of the material used.
Question:
What are the advantages of a hollow shaft over a solid shaft?: Answer:
There are various advantages of a hollow shaft compared to a solid shaft. If the outer diameter is the same, the weight of a hollow shaft is lower than that of a solid shaft. However, the cavity of the hollow shaft can also be used as a cable channel or for cooling. A hollow shaft is at the same weight or with the same cross-sectional area more rigid than a solid shaft, because the outer diameter is larger. However, the question that needs to be answered is whether the advantage is a greater room utilization or less weight.
Question:
Is a hollow shaft stiffer than a solid shaft?: Answer:
The rigidity of a hollow shaft is slightly lower with the same outer diameter than that of a solid shaft. However, with the same cross-sectional area or with the same weight, the stiffness of a hollow shaft is higher than that of a solid shaft, because the outer diameter of the hollow shaft is larger.
Question:
Why do I have running grooves on the linear shafts of my 3D printers?: Answer:
The running grooves on the linear shaft may have been created, for example, by using a linear ball bearing. To prevent grooves from forming on a steel shaft, it should be hardened and hard chromium plated, making it more durable and resistant to the wear and tear from ball bearings.
Question:
How do the flexure properties of hollow shafts and solid shafts differ?: Answer:
With an equally large outer diameter, a solid shaft has better flexure properties than an equally large hollow shaft. However, the solid shaft is not much stiffer than a hollow shaft with the same outer diameter, since the outer sections mainly carry the load. Hollow shafts with the same cross-sectional area are more rigid than solid shafts, because they have a larger outer diameter. Therefore, there is physically more material in the outer sections for the bending, which bears the loads.
Question:
I need a lacquered or matted shaft because reflections cause problems with the optics. Does MISUMI have something like that?: Answer:
MISUMI LTBC-coated linear shafts are an alternative to painted or matted steel shafts. The LTBC coating is low-reflection and has the same effect as painted and matte shafts. In addition, LTBC-coated linear shafts are more resistant to wear and tear and flaking. You can find further information on LTBC coating here .
Question:
It has been shown that a hollow shaft is stronger than a solid shaft made of the same material. Why?: Answer:
A hollow shaft with the same outer dimensions is principally not stronger than a solid shaft. However, a hollow shaft per weight unit is stronger.