Support Pins - Stepped - Threaded

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Shipping Days
More Information
Catalog
Technical Information

Material	Surface Treatment	Hardness	Round			Diamond
Material	Surface Treatment	Hardness	Threaded	Tapped	Pilot	Threaded	Tapped	Pilot
EN 1.1191 Equiv.	Black Oxide	-	SHPCB	SHPAB	SHPBB	SDPCB	SDPAB	-
EN 1.1191 Equiv.	Hard Chrome Plating	Plating Hardness: 750HV ~	SHPCR	SHPAR	SHPBR	-	SDPAR	SDPBR
EN 1.1191 Equiv.	Black Oxide	Treated Hardness: 45 ~ 50HRC	SHPCHB	SHPAHB	SHPBHB	SDPCHB	-	SDPBHB
EN 1.1191 Equiv.	Hard Chrome Plating	Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~	-	SHPAHR	SHPBHR	-	-	SDPBHR
EN 1.4301 Equiv.	-	-	SHPCSU	SHPASU	SHPBSU	SDPCSU	SDPASU	SDPBSU
EN 1.4037 Equiv.	-	Treated Hardness: 50 ~ 55HRC	SHPCC	SHPAC	SHPBC	SDPCC	SDPAC	SDPBC

EN 1.4301 Equiv. may not be polished and may have no centering hole.

Specifications

Part Number	-	L	-	P	-	B
SHPAR10 SDPCSU20	- -	L20.01 L50.00	- -	P4.05 P8.00	- -	B5 B3

Part Number				L 0.01mm Increment	P 0.01mm Increment	B Selection	m	d	M (Coarse)	* Tightening Torque N•cm	ℓ₁	W₁	(W)	ℓ₂
Type			D
Threaded <Round> SHPCB SHPCR SHPCHB SHPCSU SHPCC <Diamond> SDPCB SDPCHB SDPCSU SDPCC	Tapped <Round> SHPAB SHPAR SHPAHB SHPAHR SHPASU SHPAC <Diamond> SDPAB SDPAR SDPASU SDPAC	Pilot <Round> SHPBB SHPBR SHPBHB SHPBHR SHPBSU SHPBC <Diamond> SDPBR SDPBHB SDPBHR SDPBSU SDPBC	6	10.00~50.00	3.00~4.00	2 3 4 5	1	-	M3	98	-	5	1.0	8
			8		3.00~6.00							7	1.5
			10	20.00~80.00			2	6			6	8	1.5
			12		4.00~8.00			8	M5	461		10	1.8	10
			15		4.00~10.00		3	10			9	13	2.2
			20		5.00~10.00			12	M8	1911		17	2.5
			25		8.00~15.00			16	M10	3783	10	20	3

Pilot Type is not available for D6, D8. Note the strength of undercut part for Internal Thread and Pilot. >> P.1566
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P. 2297.) Not applicable when using locking materials or lock washers.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SDPCB6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5]
SDPCB8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5]
SDPCB10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5]
SDPCB12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5]
SDPCB15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5]
SDPCB20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5]
SDPCB25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5]
SDPCC6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5]
SDPCC8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5]
SDPCC10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5]
SDPCC12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5]
SDPCC15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5]
SDPCC20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5]
SDPCC25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5]
SDPCHB6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5]
SDPCHB8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5]
SDPCHB10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5]
SDPCHB12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5]
SDPCHB15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5]
SDPCHB20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5]
SDPCHB25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5]
SDPCSU6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5]
SDPCSU8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5]
SDPCSU10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5]
SDPCSU12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5]
SDPCSU15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5]
SDPCSU20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5]
SDPCSU25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5]
SHPCB6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5]
SHPCB8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCB10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCB12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5]
SHPCB15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5]
SHPCB20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5]
SHPCB25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5]
SHPCC6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5]
SHPCC8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCC10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCC12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5]
SHPCC15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5]
SHPCC20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5]
SHPCC25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5]
SHPCHB6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5]
SHPCHB8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCHB10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCHB12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5]
SHPCHB15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5]
SHPCHB20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5]
SHPCHB25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5]
SHPCR6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5]
SHPCR8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCR10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCR12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5]
SHPCR15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5]
SHPCR20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5]
SHPCR25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5]
SHPCSU6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5]
SHPCSU8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCSU10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5]
SHPCSU12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Tip Shape	Material	Surface Treatment (Ø)	Heat Treatment	Hardness	O.D. D (mm)
-	1	7 Days	10	Flat	Steel	Black Oxide	Not Provided	Not Provided	6
-	1	7 Days	10	Flat	Steel	Black Oxide	Not Provided	Not Provided	8
-	1	7 Days	10	Flat	Steel	Black Oxide	Not Provided	Not Provided	10
-	1	7 Days	10	Flat	Steel	Black Oxide	Not Provided	Not Provided	12
-	1	7 Days	10	Flat	Steel	Black Oxide	Not Provided	Not Provided	15
-	1	7 Days	10	Flat	Steel	Black Oxide	Not Provided	Not Provided	20
-	1	7 Days	10	Flat	Steel	Black Oxide	Not Provided	Not Provided	25
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	6
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	8
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	10
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	12
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	15
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	20
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	25
-	1	10 Days	10	Flat	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	6
-	1	10 Days	10	Flat	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	8
-	1	10 Days	10	Flat	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	10
-	1	10 Days	10	Flat	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	12
-	1	10 Days	10	Flat	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	15
-	1	10 Days	10	Flat	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	20
-	1	10 Days	10	Flat	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	25
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	-	6
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	-	8
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	-	10
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	-	12
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	-	15
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	-	20
-	1	10 Days	10	Flat	Stainless Steel	Not Provided	Provided	-	25
-	1	10 Days	10	Spherical	Steel	Black Oxide	Not Provided	Not Provided	6
-	1	10 Days	10	Spherical	Steel	Black Oxide	Not Provided	Not Provided	8
-	1	10 Days	10	Spherical	Steel	Black Oxide	Not Provided	Not Provided	10
-	1	10 Days	10	Spherical	Steel	Black Oxide	Not Provided	Not Provided	12
-	1	10 Days	10	Spherical	Steel	Black Oxide	Not Provided	Not Provided	15
-	1	10 Days	10	Spherical	Steel	Black Oxide	Not Provided	Not Provided	20
-	1	10 Days	10	Spherical	Steel	Black Oxide	Not Provided	Not Provided	25
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	6
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	8
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	10
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	12
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	15
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	20
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	Hardness: 50 - 55HRC	25
-	1	7 Days	10	Spherical	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	6
-	1	7 Days	10	Spherical	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	8
-	1	7 Days	10	Spherical	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	10
-	1	7 Days	10	Spherical	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	12
-	1	7 Days	10	Spherical	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	15
-	1	7 Days	10	Spherical	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	20
-	1	7 Days	10	Spherical	Steel	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	25
-	1	10 Days	10	Spherical	Steel	Hard Chrome Plating	Provided	Plating Hardness: 750HV	6
-	1	10 Days	10	Spherical	Steel	Hard Chrome Plating	Provided	Plating Hardness: 750HV	8
-	1	10 Days	10	Spherical	Steel	Hard Chrome Plating	Provided	Plating Hardness: 750HV	10
-	1	10 Days	10	Spherical	Steel	Hard Chrome Plating	Provided	Plating Hardness: 750HV	12
-	1	10 Days	10	Spherical	Steel	Hard Chrome Plating	Provided	Plating Hardness: 750HV	15
-	1	10 Days	10	Spherical	Steel	Hard Chrome Plating	Provided	Plating Hardness: 750HV	20
-	1	10 Days	10	Spherical	Steel	Hard Chrome Plating	Provided	Plating Hardness: 750HV	25
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	-	6
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	-	8
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	-	10
-	1	10 Days	10	Spherical	Stainless Steel	Not Provided	Provided	-	12

Price List

■Round Shape

D	Unit Price Threaded						Unit Price Internal Thread						Unit Price Pilot
D	SHPCB	SHPCR	SHPCHB	SHPCHR	SHPCSU	SHPCC	SHPAB	SHPAR	SHPAHB	SHPAHR	SHPASU	SHPAC	SHPBB	SHPBR	SHPBHB	SHPBHR	SHPBSU	SHPBC
6				-									-	-	-	-	-	-
8				-									-	-	-	-	-	-
10				-
12				-
15				-
20				-
25				-

■Diamond Shape

D	Unit Price Threaded						Unit Price Internal Thread						Unit Price Pilot
D	SDPCB	SDPCR	SDPCHB	SDPCHR	SDPCSU	SDPCC	SDPAB	SDPAR	SDPAHB	SDPAHR	SDPASU	SDPAC	SDPBB	SDPBR	SDPBHB	SDPBHR	SDPBSU	SDPBC
6		-		-					-	-			-	-	-	-	-	-
8		-		-					-	-			-	-	-	-	-	-
10		-		-					-	-			-
12		-		-					-	-			-
15		-		-					-	-			-
20		-		-					-	-			-
25		-		-					-	-			-

Example of Use

Products homepage

Basic information

Shape	Support Pins	Height Tolerance	0/+0.05	Mounting Method	Threads

Configure

63Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Tip Shape
- Flat
- Spherical
Clear
Material
Steel

Stainless Steel
Clear
Surface Treatment(Ø)
Not Provided

Hard Chrome Plating

Black Oxide
Clear
Heat Treatment
- Provided
- Not Provided
Clear
Hardness
Treated Hardness: 45 ~ 50HRC

Hardness: 50 - 55HRC

Plating Hardness: 750HV

Not Provided
Clear
O.D. D(mm)
6

8

10

12

15

20

25
Clear
Type
- SDPCB
- SDPCC
- SDPCHB
- SDPCSU
- SHPCB
- SHPCC
- SHPCHB
- SHPCR
- SHPCSU
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

7 Days or Less

10 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

Tapered Pin Locating Block Sets / Tapped
MISUMI Standard Price : 73.39 € Shipping Days: Same day
Angles - Resin
MISUMI Shipping Days: -
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day