TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute (TSC-RTREM2-5-0)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: TSC-RTREM2-5-0
Brand: MISUMI
Price: 100.97 €
Delivery time: 5 Days
Technical Data:
Single Angle (θ): 5 Degree
Outer Diameter (D): 2 φ
Flute Length (ℓ): 3.5 mm
R Size: 0 mm
Shank Diameter (d): 4 mm
- TS
- General Steel
- 2 Flutes
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-RTREM2-5-0
Part Number
|
|---|
| TSC-RTREM2-5-0 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Single Angle (θ) (Degree) | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | R Size (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
100.97 € | 1 | Available | 5 Days | 5 | 2 | 3.5 | 0 | 4 | 40 |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
|||
| Outer Diameter D |
Single Angle θ (Selection) |
Corner R (Selection) |
||||
| TSC-RTREM | 1.5 | 5° | 0 | 3 | 40 | 4 |
| 0.3 | ||||||
| 7° | 0 | |||||
| 0.3 | ||||||
| 10° | 0 | |||||
| 0.3 | ||||||
| 15° | 0 | |||||
| 0.3 | ||||||
| 2 | 5° | 0 | 3.5 | 40 | 4 | |
| 0.3 | ||||||
| 0.5 | ||||||
| 7° | 0 | |||||
| 0.3 | ||||||
| 0.5 | ||||||
| 10° | 0 | |||||
| 0.3 | ||||||
| 0.5 | ||||||
| 15° | 0 | |||||
| 0.3 | ||||||
| 0.5 | ||||||
| 2.5 | 5° | 0 | 4.5 | 45 | 6 | |
| 0.5 | ||||||
| 7° | 0 | |||||
| 0.5 | ||||||
| TSC-RTREM | 2.5 | 10° | 0 | 4.5 | 45 | 6 |
| 0.5 | ||||||
| 15° | 0 | |||||
| 0.5 | ||||||
| 3 | 5° | 0 | 5 | 45 | 6 | |
| 0.5 | ||||||
| 7° | 0 | |||||
| 0.5 | ||||||
| 10° | 0 | |||||
| 0.5 | ||||||
| 15° | 0 | |||||
| 0.5 | ||||||
| 4 | 5° | 0 | 6.5 | 50 | 6 | |
| 0.5 | ||||||
| 1 | ||||||
| 7° | 0 | |||||
| 0.5 | ||||||
| 1 | ||||||
| 10° | 0 | 8 | ||||
| 0.5 | ||||||
| 1 | ||||||
| 15° | 0 | |||||
| 0.5 | ||||||
| 1 |
For Cutting Conditions, Refer to >>Click here.
Basic information
| Model | Tapered Radius | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / Stainless Steel / Cast Iron / Aluminum / Copper | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle | Standard Helix (30 to 40°) |
This page is TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-flute, part number TSC-RTREM2-5-0.
You can find the detail information about specifications and dimensions on part number TSC-RTREM2-5-0.
Configure
Basic Attributes
-
Type
- TSC-RTREM
-
Single Angle (θ)(Degree)
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
R Size(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-RTREM1.5-15-0.3 |
| TSC-RTREM1.5-5-0 |
| TSC-RTREM1.5-5-0.3 |
| TSC-RTREM2-5-0.3 |
| TSC-RTREM2-5-0.5 |
| TSC-RTREM2-7-0 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Single Angle (θ) (Degree) | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | R Size (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
126.75 € | 1 | Available | 5 Days | 15 | 1.5 | 3 | 0.3 | 4 | 40 | |
110.53 € | 1 | Available | 5 Days | 5 | 1.5 | 3 | 0 | 4 | 40 | |
112.33 € | 1 | Available | 5 Days | 5 | 1.5 | 3 | 0.3 | 4 | 40 | |
77.71 € | 1 | Available | 5 Days | 5 | 2 | 3.5 | 0.3 | 4 | 40 | |
66.56 € | 1 | Available | 5 Days | 5 | 2 | 3.5 | 0.5 | 4 | 40 | |
110.65 € | 1 | Available | 5 Days | 7 | 2 | 3.5 | 0 | 4 | 40 |
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.