TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
- Volume Discount
The shape with 3 flutes and short flute length prevents chatter and enables high feed machining
The tapered neck effectively suppresses chatter
Machining of high hardness steel up to 65HRC is possible
The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, pricing, etc.
- TS
- High-Hardness Steel
- 3 Flutes
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-HBEM3PB3-1-50
Part Number
|
|---|
| TSC-HBEM3PB3-1-50 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Neck Gradient θ1 | Outer Diameter D (mm) | Effective Length ℓ2 (mm) | Neck Diameter D1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
91.75 € | 1 | Available | 5 Days | 3 | 4.8 | 110 | 50 | 8 | -0.007 ~ +0.003 | 1° | 6 | 12 | 7.33 |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ||
| Outer Diameter D |
Radius R |
|||||
| TSC-SHP-CR-HFEM4B | 2 | 0.2 | 3 | 50 | 6 | 1 |
| 3 | 0.2 | 4.5 | 50 | 6 | 1 | |
| 4 | 0.5 | 6 | 50 | 6 | 1 | |
| 6 | 0.5 | 9 | 50 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It is designed to have an ideal flute length, shank length and overall length, keeping in mind the usage of a shrink fit holder for processing.
● A radius (R) accuracy within 5 μm (our measured ratio) / shank diameter, tolerance h5 standard, has been adopted. The highly accurate tools with minimal quality variation are suitable for realizing high-accuracy, high-precision machining.
● Designed to have a blade shape with an emphasis on rigidity thanks to the radius (R) model negative blade, they are suitable for machining heat-treated steel / high hardness steel.
● The TS coat consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness. It is ideal for high speed machining and dry machining of heat-treated / high hardness steel.
Basic information
| Model | Tapered Neck Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Stainless Steel / Cast Iron | Number of Flutes(sheet) | 3 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Inventory Classification | Stocked Product |
| Torsion Availability | Included | Figure | 1 | Length Under Neck (θ)(Degree) | 10° |
This page is TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model, part number TSC-HBEM3PB3-1-50.
You can find the detail information about specifications and dimensions on part number TSC-HBEM3PB3-1-50.
Configure
Basic Attributes
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Shank Diameter (d)(mm)
-
Neck Gradient θ1
-
Type
- TSC-HBEM3PB
-
R Precision(μm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-HBEM3PB0.5-1-20 |
| TSC-HBEM3PB0.75-1-20 |
| TSC-HBEM3PB1-1-20 |
| TSC-HBEM3PB1-1-30 |
| TSC-HBEM3PB1-1.5-50 |
| TSC-HBEM3PB1-2-30 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Neck Gradient θ1 | Outer Diameter D (mm) | Effective Length ℓ2 (mm) | Neck Diameter D1 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
73.70 € | 1 | Available | 5 Days | 0.5 | 0.8 | 70 | 20 | 4 | ±0.005 | 1° | 1 | 2 | 1.63 | |
75.63 € | 1 | Available | 5 Days | 0.75 | 1.2 | 70 | 20 | 4 | ±0.005 | 1° | 1.5 | 3 | 2.09 | |
71.52 € | 1 | Available | 5 Days | 1 | 1.6 | 70 | 20 | 6 | ±0.005 | 1° | 2 | 4 | 2.56 | |
81.09 € | 1 | Available | 5 Days | 1 | 1.6 | 70 | 30 | 6 | ±0.005 | 1° | 2 | 4 | 2.91 | |
103.54 € | 1 | Available | 5 Days | 1 | 1.6 | 110 | 50 | 6 | ±0.005 | 1.5° | 2 | 4 | 4.41 | |
94.29 € | 1 | Available | 5 Days | 1 | 1.6 | 70 | 30 | 6 | ±0.005 | 2° | 2 | 4 | 3.82 |
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.