Carbide Straight Edge Taper Radius End Mill, 2-flute / Chamfering Blade Type
Click on this image to zoom in.
Click on this image to zoom in.
-Conical corner radius shape neck bevel blade type that shortens machining process
.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Overall Length L (mm) | #2 | #3 | #4 | #5 | #6 | #7 | #8 | 1D | 2D | 3D | 4D | F | T | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 Days | 4 | 80 | - | 0.5 ～ 2.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.15 | 0.5 ～ 10 | 0.5 ～ 1.7 | - | - | - | - | F | T | ||
| 1 | 7 Days | 6 | 90 | - | 0.5 ～ 4.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.15 | 0.5 ～ 18 | 0.5 ～ 2.7 | - | - | - | - | F | T | ||
| 1 | 7 Days | 8 | 90 | - | 0.5 ～ 6.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.15 | 0.5 ～ 26 | 0.5 ～ 3.7 | - | - | - | - | F | T | ||
| 1 | 7 Days | 10 | 120 | - | 0.5 ～ 8.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.15 | 0.5 ～ 34 | 0.5 ～ 4.7 | - | - | - | - | F | T | ||
| 1 | 7 Days | 12 | 120 | - | 0.5 ～ 10.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.15 | 0.5 ～ 36 | 0.5 ～ 5.7 | - | - | - | - | F | T | ||
| 1 | 7 Days | 4 | 50 | 0.5 ～ 2.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.15 | 0.5 ～ 10 | 0.5 ～ 1.7 | - | - | - | - | - | F | T | ||
| 1 | 7 Days | 4 | 50 | 0.5 ～ 2.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 1.15 | - | 0.5 ～ 1.7 | - | 1 | 2 | 3 | 4 | F | T | ||
| 1 | 7 Days | 6 | 60 | 0.5 ～ 4.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.15 | 0.5 ～ 18 | 0.5 ～ 2.7 | - | - | - | - | - | F | T | ||
| 1 | 7 Days | 6 | 60 | 0.5 ～ 4.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 2.15 | - | 0.5 ～ 2.7 | - | 1 | 2 | 3 | 4 | F | T | ||
| 1 | 7 Days | 8 | 60 | 0.5 ～ 6.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.15 | 0.5 ～ 26 | 0.5 ～ 3.7 | - | - | - | - | - | F | T | ||
| 1 | 7 Days | 8 | 60 | 0.5 ～ 6.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 3.15 | - | 0.5 ～ 3.7 | - | 1 | 2 | 3 | 4 | F | T | ||
| 1 | 7 Days | 10 | 80 | 0.5 ～ 8.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.15 | 0.5 ～ 34 | 0.5 ～ 4.7 | - | - | - | - | - | F | T | ||
| 1 | 7 Days | 10 | 80 | 0.5 ～ 8.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 4.15 | - | 0.5 ～ 4.7 | - | 1 | 2 | 3 | 4 | F | T | ||
| 1 | 7 Days | 12 | 80 | 0.5 ～ 10.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.15 | 0.5 ～ 36 | 0.5 ～ 5.7 | - | - | - | - | - | F | T | ||
| 1 | 7 Days | 12 | 80 | 0.5 ～ 10.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 5.15 | - | 0.5 ～ 5.7 | - | 1 | 2 | 3 | 4 | F | T | ||
| 1 | 7 Days | 16 | 100 | 0.5 ～ 14.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 7.15 | 0.5 ～ 48 | 0.5 ～ 7.7 | - | - | - | - | - | F | T | ||
| 1 | 7 Days | 16 | 100 | 0.5 ～ 14.5 | 0 ～ 30 | 0 ～ 59 | 0.1 ～ 7.15 | - | 0.5 ～ 7.7 | - | 1 | 2 | 3 | 4 | F | T |
Loading...
Specification Table
Model Number
STRCMEM/LS−STRCMEM (Long Shank)
| Shank diameter d | Blade Diameter D 0.01mm Unit Specification | Single Corner θ °−min 1' Unit Specification | Radius R 0.01mm Unit Specification | Blade Length* ℓ 0.5 mm Unit Specification | Chamfering Blade Width* CM 0.1 mm Unit Specification | Bottom Blade Shape (Selection) | Blade ℓ1 | Overall Length L | ||
| Specified Range | ℓmax. | STRCMEM | LS−STRCMEM | |||||||
| 4 | 0.50 to 2.50 | 0°15' to 30°0' | 0.10 ≤ R ≤ (D−0.2)/2 | (1) 0.5 ≤ ℓ ≤ D×4 and (2) ℓ ≤ ℓmax. (See table at right) and (3)  | 10.0 | 0.5 ≤ CM ≤ * | T (Indented Center) F (Flat) | ℓ1 = ℓ+CM | 50 | 80 |
| 6 | 0.50 to 4.50 | 18.0 | 60 | 90 | ||||||
| 8 | 0.50 to 6.50 | 26.0 | 60 | 90 | ||||||
| 10 | 0.50 to 8.50 | 34.0 | 80 | 120 | ||||||
| 12 | 0.50 to 10.50 | 36.0 | 80 | 120 | ||||||
| 16 | 0.50 to 14.50 | 48.0 | 100 | − | ||||||
*Specify ℓ so that it meets all the conditions of (1), (2) and (3).
*Depending on the size of ℓ, all slope angles may be the blade length. Maximum chamfering blade width CM (max) = (d − D − tan θ× ℓ × 2) / 2
Click here for the cutting conditions
Basic information
| Material | Ultrafine Particulate Carbide | Cutting Part ℓ1(mm) | ℓ1 = ℓ + CM |
|---|
Configure
Basic Attributes
-
Shank Diameter d(mm)
- 4
- 6
- 8
- 10
- 12
- 16
-
Overall Length L(mm)
-
#2
-
#3
-
#4
-
#5
-
#6
-
#7
-
#8
-
1D
- 1
-
2D
- 2
-
3D
- 3
-
4D
- 4
-
F
- F
-
T
- T
-
Type
- LS-STRCMEM
- STRCMEM
Filter by standard shipping days
-
- All
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.