Carbide Straight Edge Inverted Taper End Mill, 2-flute / Inverted Taper (Radius)
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Overall Length L (mm) | #2 | #3 | #4 | #5 | #6 | #7 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 Days | 3 | 60 | - | 2 ～ 3 | 0 ～ 15 | 0 ～ 59 | - | 0 ～ 1 | ||
| 1 | 8 Days | 3 | 60 | - | 2 ～ 3 | 0 ～ 15 | 0 ～ 59 | - | 1 ～ 5 | ||
| 1 | 8 Days | 3 | 60 | - | 2 ～ 3 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 0 ～ 1 | ||
| 1 | 8 Days | 3 | 60 | - | 2 ～ 3 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 1 ～ 5 | ||
| 1 | 8 Days | 4 | 80 | - | 3 ～ 4 | 0 ～ 15 | 0 ～ 59 | - | 2 ～ 9 | ||
| 1 | 8 Days | 4 | 80 | - | 3 ～ 4 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 2 ～ 9 | ||
| 1 | 7 Days | 6 | 90 | - | 4 ～ 6 | 0 ～ 15 | 0 ～ 59 | - | 0 ～ 11 | ||
| 1 | 7 Days | 6 | 90 | - | 4 ～ 6 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 0 ～ 11 | ||
| 1 | 7 Days | 8 | 90 | - | 6 ～ 8 | 0 ～ 15 | 0 ～ 59 | - | 4 ～ 19 | ||
| 1 | 7 Days | 8 | 90 | - | 6 ～ 8 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 4 ～ 19 | ||
| 1 | 7 Days | 10 | 120 | - | 8 ～ 10 | 0 ～ 15 | 0 ～ 59 | - | 5 ～ 26 | ||
| 1 | 7 Days | 10 | 120 | - | 8 ～ 10 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 5 ～ 26 | ||
| 1 | 7 Days | 12 | 120 | - | 10 ～ 12 | 0 ～ 15 | 0 ～ 59 | - | 6 ～ 34 | ||
| 1 | 7 Days | 12 | 120 | - | 10 ～ 12 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 6 ～ 34 | ||
| 1 | 8 Days | 3 | 40 | 2 ～ 3 | 0 ～ 15 | 0 ～ 59 | 0 | 0 ～ 1 | - | ||
| 1 | 8 Days | 3 | 40 | 2 ～ 3 | 0 ～ 15 | 0 ～ 59 | 0 | 1 ～ 5 | - | ||
| 1 | 8 Days | 3 | 40 | 2 ～ 3 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 0 ～ 1 | - | ||
| 1 | 8 Days | 3 | 40 | 2 ～ 3 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 1 ～ 5 | - | ||
| 1 | 8 Days | 4 | 50 | 3 ～ 4 | 0 ～ 15 | 0 ～ 59 | 0 | 2 ～ 9 | - | ||
| 1 | 8 Days | 4 | 50 | 3 ～ 4 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 2 ～ 9 | - | ||
| 1 | 7 Days | 6 | 60 | 4 ～ 6 | 0 ～ 15 | 0 ～ 59 | 0 | 2 ～ 3 | - | ||
| 1 | 7 Days | 6 | 60 | 4 ～ 6 | 0 ～ 15 | 0 ～ 59 | 0 | 3 ～ 11 | - | ||
| 1 | 7 Days | 6 | 60 | 4 ～ 6 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 2 ～ 3 | - | ||
| 1 | 7 Days | 6 | 60 | 4 ～ 6 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 3 ～ 11 | - | ||
| 1 | 7 Days | 8 | 60 | 6 ～ 8 | 0 ～ 15 | 0 ～ 59 | 0 | 4 ～ 19 | - | ||
| 1 | 7 Days | 8 | 60 | 6 ～ 8 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 4 ～ 19 | - | ||
| 1 | 7 Days | 10 | 80 | 8 ～ 10 | 0 ～ 15 | 0 ～ 59 | 0 | 5 ～ 26 | - | ||
| 1 | 7 Days | 10 | 80 | 8 ～ 10 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 5 ～ 26 | - | ||
| 1 | 7 Days | 12 | 80 | 10 ～ 12 | 0 ～ 15 | 0 ～ 59 | 0 | 6 ～ 34 | - | ||
| 1 | 7 Days | 12 | 80 | 10 ～ 12 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 6 ～ 34 | - | ||
| 1 | 7 Days | 16 | 100 | 12 ～ 16 | 0 ～ 15 | 0 ～ 59 | 0 | 8 ～ 38 | - | ||
| 1 | 7 Days | 16 | 100 | 12 ～ 16 | 0 ～ 15 | 0 ～ 59 | 0.1 ～ 1 | 8 ～ 38 | - |
Loading...
Specification Table
| Model Number | Blade Diameter D 0.1 mm Unit Specification | Single Corner θ °−min 1' Unit Specification | Radius R 0.01mm Unit Specification | Blade Length ℓ 1mm Unit Specification | Overall Length L | ||||
| Shank diameter d | |||||||||
| θ0°15′ to θ5° | θ5°1′ to θ10° | θ10°1′ to θ15° | SBTEM | LS−SBTEM | |||||
| SBTEM LS−SBTEM (Long Shank) | 3 | 2.0 to 3.0 | 0°15' to 15°0' | 0 | 1 to 5 | 1 to 2 | 1 | 40 | 60 |
| 0.10 to 1.00 | |||||||||
| 4 | 3.0 to 4.0 | 0 | 2 to 9 | 2 to 4 | 2 to 3 | 50 | 80 | ||
| 0.10 to 1.00 | |||||||||
| 6 | 4.0 to 6.0 | 0 | 3 to 11 | 3 to 5 | 3 | 60 | 90 | ||
| 0.10 to 1.00 | |||||||||
| 8 | 6.0 to 8.0 | 0 | 4 to 19 | 4 to 9 | 4 to 6 | 60 | 90 | ||
| 0.10 to 1.00 | |||||||||
| 10 | 8.0 to 10.0 | 0 | 5 to 26 | 5 to 13 | 5 to 8 | 80 | 120 | ||
| 0.10 to 1.00 | |||||||||
| 12 | 10.0 to 12.0 | 0 | 6 to 34 | 6 to 17 | 6 to 11 | 80 | 120 | ||
| 0.10 to 1.00 | |||||||||
| 16 | 12.0 to 16.0 | 0 | 8 to 38 | 8 to 18 | 8 to 12 | 100 | − | ||
| 0.10 to 1.00 | |||||||||
Click here for the cutting conditions
■ Quantity-based sliding price ([ ! ] Value under 1 yen is rounded down)
| Quantity | 1 to 2 | 3 to 4 | 5 to 14 | 15 or more |
| Price Discount Rate | Price List | 7% | 16% | [Estimate] |
Basic information
| Material | Ultrafine Particulate Carbide |
|---|
Configure
Basic Attributes
-
Shank Diameter d(mm)
- 3
- 4
- 6
- 8
- 10
- 12
- 16
-
Overall Length L(mm)
-
#2
-
#3
-
#4
-
#5
-
#6
-
#7
-
Type
- LS-SBTEM
- SBTEM
Filter by standard shipping days
-
- All
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.