Round Laser Holder
[Features]
· F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.
· With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.
· Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.
· The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.
· The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).
· The F20 can be attached directly to the breadboard (A65) by removing the rod.
· F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.
· With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.
· Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.
· The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.
· The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).
· The F20 can be attached directly to the breadboard (A65) by removing the rod.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.