• Marcas
  • Empresa
  • Contacto
ES
Type Code Seach | *NOT READY*
#CODE
Sugerencias de palabras clave
Sugerencias de números de pieza
Discontinued Products

Plain bearing bushes / plastic (iglidur) / JSM (JSM-2124-12)

Plain bearing bushes / plastic (iglidur) / JSM JSM-2124-12
  • Promotional pricing
  • Volume Discount

IGUS

IGUS

Product Details:

Manufacturer part number: JSM-2124-12

Brand: IGUS

Price: 6.86 €

Delivery time: 3 Days


Technical Data:

Type: -

Environment: -

Inner Diameter d1: - mm

O.D. d2: - mm

Overall Length b1: - mm


Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

JSM-2124-12

iglidur® J | The Versatile Endurance Runner, Sleeve Bearing (Form S)

Product Information


High wear resistance on (almost) all shafts, very low coefficients of friction
One main advantage of iglidur® J plain bearings is the combination of a low coefficient of friction when running dry and the low stickslip tendency. With a recommended maximum surface pressure of 35 MPa, iglidur® J plain bearings are not suitable for extreme loads.
When to use it?
• For high speeds
• For highest wear resistance at low to medium pressures
• Low wear against different shafts
• Low coefficient of friction in dry operation
• Vibration dampening
• Good chemical resistance
• Best performance with soft shaft materials
• Low moisture absorption
When not to use it?
• When high pressures occur
   ►iglidur® G
   ►iglidur® W300
• When short-term temperatures occur that are higher +120 °C
   ►iglidur® G
   ►iglidur® Z
• When a cost-effective bearing for occasional movements is necessary
   ►iglidur® G
Typical application areas
• Automation
• Printing industry
• Beverage technology
• Aerospace engineering
• Clean room

Material Properties

General propertiesUnitiglidur® JTesting method
Densityg/cm31.49 
Colour yellow 
Max. moisture absorption at +23 °C/50 % r.h.% weight0.3DIN 53495
Max. water absorption% weight1.3 
Coefficient of sliding friction, dynamic, against steelμ0.06–0.18 
pv value, max. (dry)MPa · m/s0.34 
Mechanical properties
Flexural modulusMPa2,400DIN 53457
Flexural strength at +20 °CMPa73DIN 53452
Compressive strengthMPa60 
Max. recommended surface pressure (+20 °C)MPa35 
Shore-D hardness 74DIN 53505
Physical and thermal properties
Max. long-term application temperature long-term application temperature°C+90 
Max. short-term application temperature°C+120 
Min. long-term application temperature°C–50 
Heat conductivityW/m · K0.25ASTM C 177
Coefficient of thermal expansion (at +23 °C)K–1 · 10–510DIN 53752
Electrical properties
Specific contact resistanceΩcm> 1013DIN IEC 93
Surface resistanceΩ> 1012DIN 53482

Dimensions

Sleeve Bearing (Form S)

2) Thickness < 1 mm: chamfer = 20°
 
Chamfer in relation to the d1
d1 [mm]:Ø 1–6Ø 6–12Ø 12–30Ø > 30
f [mm]:0.30.50.81.2



Dimensions [mm]
d1d1-d2b1Part No.
 Tolerance3) h13 
1.5+0.014
+0.054		4.02.0JSM-0104-02
2.03.57.0JSM-0203-07
2.0+0.020
+0.080		5.02.5JSM-0205-02
2.56.02.5JSM-0206-02
3.0+0.014
+0.054		4.55.0JSM-0304-05
3.04.59.0JSM-0304-09
3.0+0.020
+0.080		5.04.0JSM-0305-04
3.07.014.0JSM-0307-14
3.08.04.0JSM-0308-04
3.08.05.0JSM-0308-05
4.0+0.020
+0.068		5.54.0JSM-0405-04
4.05.56.0JSM-0405-06
4.05.58.0JSM-0405-08
5.07.04.6JSM-0507-046
5.07.05.0JSM-0507-05
5.07.010.0JSM-0507-10
5.07.014.0JSM-0507-14
5.0+0.020
+0.080		7.015.0JSM-0507-15
5.0+0.030
+0.105		8.05.0JSM-0508-05
6.0+0.010
+0.058		7.03.0JSM-0607-03
6.07.05.0JSM-0607-05
6.07.08.0JSM-0607-08
6.07.012.5JSM-0607-12.5
6.07.014.0JSM-0607-14
6.0+0.020
+0.068		8.04.3JSM-0608-043
6.08.06.0JSM-0608-06
6.0+0.020
+0.068		8.08.0JSM-0608-08
6.08.010.0JSM-0608-10
6.0+0.030
+0.105		9.06.0JSM-0609-06
6.010.010.0JSM-0610-10
7.0+0.025
+0.083		9.05.0JSM-0709-05
7.09.07.0JSM-0709-07
7.09.09.0JSM-0709-09
7.09.012.5JSM-0709-125
8.010.03.0JSM-0810-03
8.010.04.0JSM-0810-04
8.010.06.0JSM-0810-06
8.010.08.0JSM-0810-08
8.010.010.0JSM-0810-10
8.010.012.0JSM-0810-12
8.010.016.0JSM-0810-16
8.0+0.040
+0.130		12.010.0JSM-0812-10
8.012.012.0JSM-0812-12
9.0+0.025
+0.083		11.010.0JSM-0911-10
10.012.05.0JSM-1012-05
10.012.06.0JSM-1012-06
10.012.08.0JSM-1012-08
10.012.010.0JSM-1012-10
10.012.011.0JSM-1012-11
10.012.012.0JSM-1012-12
10.012.015.0JSM-1012-15
10.012.020.0JSM-1012-20
10.0+0.040 +0.13014.010.0JSM-1014-10
10.0+0.040 +0.13014.016.0JSM-1014-16
12.0+0.032
+0.102		14.06.0JSM-1214-06
12.014.08.0JSM-1214-08
12.014.09.0JSM-1214-09
12.014.010.0JSM-1214-10
12.014.012.0JSM-1214-12
12.014.015.0JSM-1214-15
12.014.020.0JSM-1214-20
12.0+0.050
+0.160		16.012.0JSM-1216-12
12.016.017.0JSM-1216-17
13.0+0.032
+0.102		15.010.0JSM-1315-10
13.015.020.0JSM-1315-20
13.016.018.5JSM-1316-185
14.016.05.0JSM-1416-05
14.016.08.0JSM-1416-08
14.016.010.0JSM-1416-10
14.016.015.0JSM-1416-15
14.016.020.0JSM-1416-20
14.016.025.0JSM-1416-25
14.018.018.0JSM-1418-18
14.0+0.050
+0.160		20.020.0JSM-1420-20
15.0+0.032
+0.102		17.06.0JSM-1517-06
15.017.010.0JSM-1517-10
15.017.012.0JSM-1517-12
15.017.015.0JSM-1517-15
15.017.020.0JSM-1517-20
15.017.025.0JSM-1517-25
15.018.010.0JSM-1518-10
16.018.010.0JSM-1618-10
16.018.012.0JSM-1618-12
16.018.015.0JSM-1618-15
16.018.020.0JSM-1618-20
16.018.025.0JSM-1618-25
16.0+0.050
+0.160		20.016.0JSM-1620-16
16.022.016.0JSM-1622-16
16.022.020.0JSM-1622-20
17.0+0.032
+0.102		19.06.0JSM-1719-06
18.020.010.0JSM-1820-10
18.020.015.0JSM-1820-15
18.020.020.0JSM-1820-20
18.020.025.0JSM-1820-25
19.022.014.0JSM-1922-14
20.0+0.040
+0.124		22.020.0JSM-2022-20
20.022.030.0JSM-2022-30
20.0+0.040
+0.124		23.010.0JSM-2023-10
20.023.015.0JSM-2023-15
20.023.020.0JSM-2023-20
20.0+0.020
+0.104		23.025.0JSM-2023-25
20.023.030.0JSM-2023-30
20.0+0.065
+0.195		26.06.0JSM-2026-06
20.026.020.0JSM-2026-20
20.026.025.0JSM-2026-25
20.026.030.0JSM-2026-30
21.0+0.040
+0.124		24.012.0JSM-2124-12
22.025.015.0JSM-2225-15
22.025.020.0JSM-2225-20
22.025.025.0JSM-2225-25
22.025.030.0JSM-2225-30
23.026.012.0JSM-2326-12
24.027.015.0JSM-2427-15
24.027.020.0JSM-2427-20
24.027.025.0JSM-2427-25
24.027.030.0JSM-2427-30
24.027.046.0JSM-2427-46
25.028.012.0JSM-2528-12
25.028.015.0JSM-2528-15
25.028.020.0JSM-2528-20
25.028.025.0JSM-2528-25
25.028.030.0JSM-2528-30
25.028.060.0JSM-2528-60
25.0+0.065
+0.195		30.040.0JSM-2530-40
25.032.025.0JSM-2532-25
25.032.032.0JSM-2532-32
25.032.035.0JSM-2532-35
26.030.020.0JSM-2630-20
27.0+0.040
+0.124		30.020.0JSM-2730-20
28.0+0.065
+0.195		32.020.0JSM-2832-20
28.032.025.0JSM-2832-25
28.032.030.0JSM-2832-30
30.0+0.040
+0.124		34.020.0JSM-3034-20
30.034.025.0JSM-3034-25
30.034.030.0JSM-3034-30
30.034.040.0JSM-3034-40
30.0+0.065
+0.195		38.040.0JSM-3038-40
32.0+0.050
+0.150		36.020.0JSM-3236-20
32.036.030.0JSM-3236-30
32.036.040.0JSM-3236-40
32.0+0.050
+0.150		37.025.0JSM-3237-25
32.038.050.0JSM-3238-50
35.039.020.0JSM-3539-20
35.039.030.0JSM-3539-30
35.039.040.0JSM-3539-40
35.039.050.0JSM-3539-50
36.040.045.0JSM-3640-45
40.044.020.0JSM-4044-20
40.044.030.0JSM-4044-30
40.044.035.0JSM-4044-35
40.044.040.0JSM-4044-40
40.044.050.0JSM-4044-50
42.0+0.080 +0.24046.073.0JSM-4246-73
45.0+0.025
+0.125		50.020.0JSM-4550-20
45.050.030.0JSM-4550-30
45.050.040.0JSM-4550-40
45.0+0.025 +0.12550.050.0JSM-4550-50
50.0+0.050
+0.150		55.020.0JSM-5055-20
50.055.030.0JSM-5055-30
50.055.040.0JSM-5055-40
50.055.050.0JSM-5055-50
50.055.060.0JSM-5055-60
55.0+0.060
+0.180		60.060.0JSM-5560-60
60.065.060.0JSM-6065-60
65.070.050.0JSM-6570-50
70.075.060.0JSM-7075-60
75.080.060.0JSM-7580-60
80.085.0100.0JSM-8085-100
80.086.060.0JSM-8086-60
100.0+0.072
+0.212		105.0100.0JSM-100105-100
110.0115.060.0JSM-110115-60
3) After press-fit.
 
Data to be displayed
30
45
60
  1. 1
Part Number
JSM-2124-12
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSType Environment Inner Diameter d1
(mm) 		O.D. d2
(mm) 		Overall Length b1
(mm) 		Maximum Allowable PV Value Range
(N/mm2•m/s) 		Max. Allowable Velocity V
(m/s) 		Recommended Shaft Tolerance Thickness t
(mm) 		Operating Temperature Range
(°C)

6.86 €

1 Available 3 Days 10----------

Loading...

  1. 1
 

Basic information

Resin Group High Performance Polymer Group Maximum Allowable PV Value(N/mm²·m/s) 0.34 Max. Allowable Surface Pressure P(N/mm2) 35
Recommended Housing Hole Tolerance H7 Lubrication Condition Unlubricated

This page is Plain bearing bushes / plastic (iglidur) / JSM, part number JSM-2124-12.
You can find the detail information about specifications and dimensions on part number JSM-2124-12.

Configure

Clear all

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Type

    • Sleeve Type

    Clear

  • Environment

    • Standard
    • Foreign Object Resistant
    • Vibration Resistant
    • In Oil
    • In Water
    • In Seawater
    • In Chemical

    Clear

  • Inner Diameter d1(mm)

    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 10
    • 12
    • 13
    • 14
    • 15
    • 16
    • 18
    • 19
    • 20
    • 22
    • 24
    • 25
    • 26
    • 28
    • 30
    • 32
    • 35
    • 36
    • 40
    • 42
    • 45
    • 50
    • 55
    • 75
    • 80
    • 100

    Clear

  • O.D. d2(mm)

    • 3.5
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 23
    • 25
    • 26
    • 27
    • 28
    • 30
    • 32
    • 34
    • 36
    • 37
    • 38
    • 39
    • 40
    • 44
    • 46
    • 50
    • 55
    • 60
    • 80
    • 85
    • 105

    Clear

  • Overall Length b1(mm)

    • 2.5
    • 3
    • 4
    • 4.3
    • 4.6
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 12.5
    • 14
    • 15
    • 16
    • 17
    • 18
    • 18.5
    • 20
    • 25
    • 30
    • 32
    • 35
    • 40
    • 45
    • 46
    • 50
    • 60
    • 73
    • 100

    Clear

  • Maximum Allowable PV Value Range(N/mm2•m/s)

    • 0.3 to 1.0

    Clear

  • Max. Allowable Velocity V(m/s)

    • 1.5
    • 10

    Clear

  • Recommended Shaft Tolerance

    • h9

    Clear

  • Thickness t(mm)

    • 0.5
    • 0.75
    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4

    Clear

  • Type

    • JSM

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • Same day
    • 2 Days or Less
    • 3 Days or Less

    Reset

Optional Attributes

Variation of this product

Part Number
JSM-0206-02
JSM-0304-05
JSM-0304-09
JSM-2225-15
JSM-2225-20
JSM-2225-25
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountStandard
Shipping Days
?		RoHSType Environment Inner Diameter d1
(mm) 		O.D. d2
(mm) 		Overall Length b1
(mm) 		Maximum Allowable PV Value Range
(N/mm2•m/s) 		Max. Allowable Velocity V
(m/s) 		Recommended Shaft Tolerance Thickness t
(mm) 		Operating Temperature Range
(°C)

3.50 €

1 Available Same day

Stock

10Sleeve TypeStandard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Seawater2.562.50.3 to 1.01.5h9--50～90

4.44 €

1 Available Same day

Stock

10Sleeve TypeStandard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Seawater34.550.3 to 1.01.5h9--50～90

4.74 €

1 Available Same day

Stock

10Sleeve TypeStandard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Seawater34.590.3 to 1.01.5h9--50～90

6.54 €

1 Available Same day

Stock

10-Standard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Chemical / In Seawater222515-10-1.5-

6.76 €

1 Available Same day

Stock

10-Standard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Chemical / In Seawater222520-10-1.5-

6.78 €

1 Available Same day

Stock

10-Standard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Chemical / In Seawater222525-10-1.5-

Tech Support

Technical Inquiry

Método de pago

Factura

Prepago

PayPal

Fabricación bajo demanda

Cambiar de vista

Certificados

  • ISO-9001
  • ISO-14001
  • Certificación AEO
  • RoHS
  • REACH

MISUMI en todo el mundo

Redes sociales

Nota Legal

Copyright © MISUMI Corporation All Rights Reserved.