Small XY-Axis Block Stage TAS
[Features]
- Move the stage with a hex wrench.
- Screws are used for micro-feeding.
- Dovetail grooves used for the travel guide.
- Has a mechanism for correcting rattling.
- New design with lowered stage height.
- New design with lowered stage height.
- Effective for limited spaces or embedded use.
- Mounting method: Mounting screw holes are countersunk.
- It can therefore be fixed from either above or below.
- [Fixing from above] TAS-251: M2, TAS-401: M3 [Fixing from below] TAS-251: M3, TAS-401: M4, material and finishing are brass and black chrome plating.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TAS-252
Part Number
|
|---|
| TAS-252 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Table Size (Length) L (Range Selectable) (mm) | Table Size (Width) W (Range Selectable) (mm) | Load Capacity (Range Selectable) (N) | Table Size (Length) L (mm) | Table Size (Width) W (mm) | Horizontal Load Capacity (N) | Stroke (X Distance) (mm) | Stroke (Y Distance) (mm) | Table Size (Thickness) H (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
359.15 € | 1 | 9 Days | 10 | Up to 25 | Up to 25 | 5–30 | 25 | 25 | 24.5 | ±3 | ±3 | 26 |
Loading...
Basic information
| Stroke (Distance along X-Axis) (Range Selectable)(mm) | ~ ±10mm | Stroke (Distance along Y-Axis) (Range Selectable)(mm) | ~ ±10mm | Table Material | Brass |
|---|---|---|---|---|---|
| Table Surface Treatment | LTBC Plating | Guiding Mechanism | Dovetail Slide, Feed Screw | Table Size (Thickness) H (Range Selectable)(mm) | 25.1 to 30 |
| Through Hole (Table Center Hole) | Available | Table Straightness(µm) | 20 | Table Parallelism(µm) | 100 |
| Feed Knob Position | Holoaxial center | Clamp | NA | Reversed | Standard |
| Feed method (feed screw type) | Hex wrench operation | Feed method (feed pitch)(mm) | 0.5mm |
This page is Small XY-Axis Block Stage TAS, part number TAS-252.
You can find the detail information about specifications and dimensions on part number TAS-252.
Configure
Basic Attributes
-
Table Size (Length) L (Range Selectable)(mm)
- Up to 25
- 26 to 40
-
Table Size (Width) W (Range Selectable)(mm)
- Up to 25
- 26 to 40
-
Table Size (Length) L(mm)
-
Table Size (Width) W(mm)
-
Horizontal Load Capacity(N)
-
Stroke (X Distance)(mm)
-
Stroke (Y Distance)(mm)
-
Table Size (Thickness) H(mm)
-
Type
- TAS
-
Load Capacity (Range Selectable)(N)
- 5–30
- 30.1~50
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TAS-402 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Table Size (Length) L (Range Selectable) (mm) | Table Size (Width) W (Range Selectable) (mm) | Load Capacity (Range Selectable) (N) | Table Size (Length) L (mm) | Table Size (Width) W (mm) | Horizontal Load Capacity (N) | Stroke (X Distance) (mm) | Stroke (Y Distance) (mm) | Table Size (Thickness) H (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
399.61 € | 1 | 9 Days | 10 | 26 to 40 | 26 to 40 | 30.1~50 | 40 | 40 | 49 | ±7 | ±7 | 30 |
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.