Plain bearing bushes with flange / plastic (iglidur) / WFM (WFM-2830-36)

Click on this image to zoom in.

Promotional pricing
Volume Discount

IGUS

Product Details:

Manufacturer part number: WFM-2830-36

Brand: IGUS

Price: 7.70 €

Delivery time: 2 Days

Technical Data:

Type: -

Environment: -

Inner Diameter d1: - mm

O.D. d2: - mm

Overall Length b1: - mm

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

WFM-2830-36

Product specification
Part Numbers
Catalog

iglidur^®W300 | The Classic Endurance Runner up to 30 MPa, Flange Bearing (Form F)

Product Information

Excellent wear resistance on (virtually) all shafts
The iglidur^® W300 material gives excellent wear resistance, even in harsh environments or when used with rough shafts. Of all iglidur^® materials, iglidur^® W300 is the most resistant to these conditions.
When to use it?
• When especially high service life is necessary
• When low coefficients of dynamic friction and high wear resistance are needed
• For use on 304 stainless steel shafts
• For harsh environments and very rough shafts
• Dirt resistant
When not to use it?
• For high loads starting at 50 MPa
  ►iglidur^® Q
• When constant temperatures exceed +90°C
  ►iglidur^® H
  ►iglidur^® X
• For very wet environments
  ►iglidur^® P
• When an economical bearing is required
  ►iglidur^® G
Typical application areas
• Automation
• Printing industry
• Woodworking
• Mechatronics
• Test engineering and quality assurance

Material Properties

General properties	Unit	iglidur^® W300	Testing method
Density	g/cm³	1.24
Colour		yellow
Max. moisture absorption at +23°C/50% r.h.	% weight	1.3	DIN 53495
Max. water absorption	% weight	6.5
Coefficient of sliding friction, dynamic, against steel	μ	0.08–0.23
pv value, max. (dry)	MPa · m/s	0.23
Mechanical properties
Flexural modulus	MPa	3,500	DIN 53457
Flexural strength at +20°C	MPa	125	DIN 53452
Compressive strength	MPa	61
Max. recommended surface pressure (+20°C)	MPa	60
Shore-D hardness		77	DIN 53505
Physical and thermal properties
Max. long-term application temperature	°C	+90
Max. short-term application temperature	°C	+180
Min. long-term application temperature	°C	–40
Heat conductivity	W/m · K	0.24	ASTM C 177
Coefficient of thermal expansion (at +23 °C)	K^–1 · 10^–5	9	DIN 53752
Electrical properties
Specific contact resistance	Ωcm	> 10¹³	DIN IEC 93
Surface resistance	Ω	> 10¹²	DIN 53482

Dimensions

Flange Bearing (Form F)

²⁾ Thickness < 1 mm: chamfer = 20°

Chamfer in relation to the d1
d1 [mm]:	Ø 1–6	Ø 6–12	Ø 12–30	Ø > 30
f [mm]:	0.3	0.5	0.8	1.2

Dimensions [mm]

d1	d1-	d2	d3	b1	b2	Part No.
	Tolerance³⁾		d13	h13	–0.14
2.5	+0.014 +0.054	4.0	6.5	3.0	0.75	WFM-0204-03
3.0		4.5	7.5	3.0	0.75	WFM-0304-03
3.0		4.5	7.5	5.0	0.75	WFM-0304-05
4.0	+0.020 +0.068	5.5	9.5	3.0	0.75	WFM-0405-03
4.0		5.5	9.5	4.0	0.75	WFM-0405-04
4.0		5.5	9.5	6.0	0.75	WFM-0405-06
5.0	+0.010 +0.040	6.0	10.0	8.0	0.50	WFM-0506-08
5.0	+0.020 +0.068	7.0	11.0	4.0	1.00	WFM-0507-04
5.0		7.0	11.0	5.0	1.00	WFM-0507-05
6.0		8.0	12.0	4.0	1.00	WFM-0608-04
6.0		8.0	12.0	6.0	1.00	WFM-0608-06
6.0		8.0	12.0	8.0	1.00	WFM-0608-08
6.0		8.0	12.0	10.0	1.00	WFM-0608-10
6.0		8.0	12.0	15.0	1.00	WFM-0608-15
7.0	+0.025 +0.083	9.0	15.0	10.0	1.00	WFM-0709-10
7.0		9.0	15.0	12.0	1.00	WFM-0709-12
8.0		10.0	15.0	2.7	1.00	WFM-0810-02
8.0		10.0	15.0	4.0	1.00	WFM-0810-04
8.0		10.0	15.0	5.5	1.00	WFM-0810-05
8.0		10.0	15.0	7.5	1.00	WFM-0810-07
8.0		10.0	15.0	9.5	1.00	WFM-0810-09
8.0		10.0	15.0	10.0	1.00	WFM-0810-10
8.0		10.0	15.0	23.0	1.00	WFM-0810-23
8.0		10.0	15.0	30.0	1.00	WFM-0810-30
8.0		10.0	15.0	5.0	1.00	WFM-081015-05
10.0		12.0	18.0	4.0	1.00	WFM-1012-04
10.0		12.0	18.0	5.0	1.00	WFM-1012-05
10.0		12.0	18.0	6.0	1.00	WFM-1012-06
10.0		12.0	18.0	7.0	1.00	WFM-1012-07
10.0		12.0	18.0	9.0	1.00	WFM-1012-09
10.0		12.0	18.0	10.0	1.00	WFM-1012-10
10.0		12.0	18.0	12.0	1.00	WFM-1012-12
10.0		12.0	18.0	15.0	1.00	WFM-1012-15
10.0		12.0	18.0	17.0	1.00	WFM-1012-17
12.0	+0.032 +0.102	14.0	20.0	4.0	1.00	WFM-1214-04
12.0		14.0	20.0	4.4	1.00	WFM-1214-044
12.0		14.0	20.0	6.0	1.00	WFM-1214-06
12.0		14.0	20.0	7.0	1.00	WFM-1214-07
12.0		14.0	20.0	9.0	1.00	WFM-1214-09
12.0		14.0	20.0	10.0	1.00	WFM-1214-10
12.0		14.0	20.0	11.0	1.00	WFM-1214-11
12.0		14.0	20.0	12.0	1.00	WFM-1214-12
12.0		14.0	20.0	15.0	1.00	WFM-1214-15
12.0		14.0	20.0	17.0	1.00	WFM-1214-17
12.0		14.0	20.0	20.0	1.00	WFM-1214-20
13.0		15.0	22.0	6.0	1.00	WFM-1315-06
14.0		16.0	22.0	4.0	1.00	WFM-1416-04
14.0		16.0	22.0	5.0	1.00	WFM-1416-05
14.0		16.0	22.0	8.0	1.00	WFM-1416-08
14.0		16.0	22.0	12.0	1.00	WFM-1416-12
14.0		16.0	22.0	17.0	1.00	WFM-1416-17
14.0		16.0	22.0	29.0	1.00	WFM-1416-29
15.0		17.0	23.0	9.0	1.00	WFM-1517-09
15.0		17.0	23.0	12.0	1.00	WFM-1517-12
15.0		17.0	23.0	17.0	1.00	WFM-1517-17
15.0		17.0	23.0	20.0	1.00	WFM-1517-20
16.0		18.0	24.0	9.0	1.00	WFM-1618-09
16.0		18.0	24.0	12.0	1.00	WFM-1618-12
16.0		18.0	24.0	17.0	1.00	WFM-1618-17
17.0		19.0	25.0	12.0	1.00	WFM-1719-12
17.0		19.0	25.0	18.0	1.00	WFM-1719-18
17.0		19.0	25.0	25.0	1.00	WFM-1719-25
18.0		20.0	26.0	6.0	1.00	WFM-1820-06
18.0		20.0	26.0	12.0	1.00	WFM-1820-12
18.0		20.0	26.0	17.0	1.00	WFM-1820-17
18.0		20.0	26.0	22.0	1.00	WFM-1820-22
20.0	+0.040 +0.124	23.0	30.0	11.5	1.50	WFM-2023-11
20.0		23.0	30.0	14.5	1.50	WFM-2023-14
20.0		23.0	30.0	16.5	1.50	WFM-2023-16
20.0		23.0	30.0	21.5	1.50	WFM-2023-21
24.0		27.0	32.0	10.5	1.50	WFM-2427-10
25.0		28.0	35.0	11.5	1.50	WFM-2528-11
25.0		28.0	35.0	16.5	1.50	WFM-2528-16
25.0		28.0	35.0	21.0	1.50	WFM-2528-21
25.0		28.0	32.0	30.0	1.50	WFM-2528-30
25.0		28.0	31.0	13.5	1.50	WFM-252831-13
28.0		30.0	35.0	36.0	1.00	WFM-2830-36
30.0		34.0	42.0	10.0	2.00	WFM-3034-10
30.0		34.0	42.0	16.0	2.00	WFM-3034-16
30.0		34.0	42.0	26.0	2.00	WFM-3034-26
30.0		34.0	42.0	37.0	2.00	WFM-3034-37
32.0	+0.050 +0.150	36.0	40.0	16.0	2.00	WFM-3236-16
32.0		36.0	40.0	26.0	2.00	WFM-3236-26
35.0		39.0	47.0	9.0	2.00	WFM-3539-09
35.0		39.0	47.0	16.0	2.00	WFM-3539-16
35.0		39.0	47.0	26.0	2.00	WFM-3539-26
35.0		39.0	50.0	35.0	2.00	WFM-353950-35
38.0		42.0	50.0	22.0	2.00	WFM-3842-22
40.0		44.0	52.0	30.0	2.00	WFM-4044-30
40.0		44.0	52.0	40.0	2.00	WFM-4044-40
45.0		50.0	58.0	50.0	2.00	WFM-4550-50
50.0		55.0	63.0	40.0	2.00	WFM-5055-40
50.0		55.0	63.0	50.0	2.00	WFM-5055-50
55.0	+0.060 +0.180	60.0	68.0	60.0	2.00	WFM-5560-60
57.0		62.0	67.0	40.0	2.00	WFM-5762-40
60.0		65.0	73.0	60.0	2.00	WFM-6065-60
65.0		70.0	78.0	60.0	2.00	WFM-6570-60
70.0		75.0	83.0	100.0	2.50	WFM-7075-100
75.0		80.0	88.0	100.0	2.50	WFM-7580-100
80.0		85.0	93.0	100.0	2.50	WFM-8085-100
90.0	+0.072 +0.212	95.0	103.0	100.0	2.50	WFM-9095-100
100.0		105.0	113.0	100.0	2.50	WFM-100105-100
120.0		125.0	133.0	100.0	2.50	WFM-120125-100

³⁾After press-fit.

Data to be displayed: 30; 45; 60

Part Number
WFM-2830-36

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Type	Environment	Inner Diameter d1 (mm)	O.D. d2 (mm)	Overall Length b1 (mm)	Maximum Allowable PV Value Range (N/mm²•m/s)	Maximum Allowable PV Value (N/mm²·m/s)	Max. Allowable Surface Pressure P (N/mm²)	Max. Allowable Velocity V (m/s)	Recommended Shaft Tolerance	Recommended Housing Hole Tolerance	Thickness t (mm)	Flange Outer Diameter d3 (mm)
	7.70 €	1	Available	2 Days	10	-	-	-	-	-	-	-	-	-	-	-	-	-

Products homepage

Basic information

Resin Group	High Performance Polymer Group	Lubrication Condition	Unlubricated

This page is Plain bearing bushes with flange / plastic (iglidur) / WFM, part number WFM-2830-36.
You can find the detail information about specifications and dimensions on part number WFM-2830-36.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- Flanged Type
Clear
Environment
- Standard
- Foreign Object Resistant
- Vibration Resistant
- In Water
- In Seawater
- In Chemical
Clear
Inner Diameter d1(mm)
3

4

5

6

7

8

10

12

13

14

15

16

17

18

20

25

30

32

35

38

40

45

50

55

57

65

70

75

80

90

100

120
Clear
O.D. d2(mm)
4.5

5.5

6

7

8

9

10

12

14

15

16

17

18

19

20

23

28

34

36

39

42

44

50

55

60

62

70

75

80

85

95

105

125
Clear
Overall Length b1(mm)
2.7

3

4

4.4

5

5.5

6

7

7.5

8

9

9.5

10

11

11.5

12

13

14

15

16

16.5

17

18

20

21

21.5

22

23

25

26

29

30

35

37

40

50

60

100
Clear
Maximum Allowable PV Value Range(N/mm²•m/s)
- 0.10 to 0.29
Clear
Maximum Allowable PV Value(N/mm²·m/s)
0.12

0.23
Clear
Max. Allowable Surface Pressure P(N/mm²)
20

60
Clear
Max. Allowable Velocity V(m/s)
0.8

6
Clear
Recommended Shaft Tolerance
- h9
Clear
Recommended Housing Hole Tolerance
- H7
Clear
Thickness t(mm)
1

1.5

2

2.5
Clear
Flange Outer Diameter d3(mm)
7.5

9.5

10

11

12

15

18

20

22

23

24

25

26

30

31

35

40

42

47

50

52

58

63

67

68

78

83

88

93

103

113

133
Clear
Type
- WFM
Clear
Filter by CAD data type
- 3D
Clear

Filter by standard shipping days

All

Same day

2 Days or Less

3 Days or Less

4 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
WFM-0405-03
WFM-0405-04
WFM-0405-06
WFM-3034-10
WFM-3034-16
WFM-3034-26

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Type	Environment	Inner Diameter d1 (mm)	O.D. d2 (mm)	Overall Length b1 (mm)	Maximum Allowable PV Value Range (N/mm²•m/s)	Maximum Allowable PV Value (N/mm²·m/s)	Max. Allowable Surface Pressure P (N/mm²)	Max. Allowable Velocity V (m/s)	Recommended Shaft Tolerance	Recommended Housing Hole Tolerance	Thickness t (mm)	Flange Outer Diameter d3 (mm)
4.74 €	1	Available	2 Days	-	Flanged Type	Standard	4	5.5	3	0.10 to 0.29	0.12	20	0.8	h9	-	-	9.5
4.74 €	1	Available	2 Days	-	Flanged Type	Standard	4	5.5	4	0.10 to 0.29	0.12	20	0.8	h9	-	-	9.5
4.74 €	1	Available	2 Days	-	Flanged Type	Standard	4	5.5	6	0.10 to 0.29	0.12	20	0.8	h9	-	-	9.5
8.16 €	1	Available	2 Days	-	Flanged Type	Standard / Vibration Resistant / Foreign Object Resistant / In Water / In Chemical / In Seawater	30	34	10	0.10 to 0.29	0.12	20	0.8	h9	H7	2	42
8.78 €	1	Available	2 Days	-	Flanged Type	Standard / Vibration Resistant / Foreign Object Resistant / In Water / In Chemical / In Seawater	30	34	16	0.10 to 0.29	0.12	20	0.8	h9	H7	2	42
11.38 €	1	Available	2 Days	-	Flanged Type	Standard / Vibration Resistant / Foreign Object Resistant / In Water / In Chemical / In Seawater	30	34	26	0.10 to 0.29	0.12	20	0.8	h9	H7	2	42

Tech Support

: Technical Inquiry

Plain bearing bushes with flange / plastic (iglidur) / WFM (WFM-2830-36)

Product Details:

Technical Data: