Connecting sets X-Z, Aluminium

Volume Discount

With connecting sets GN 900.3 two adjustable slide units GN 900 can be combined to produce an X-Z axis configuration.
The combination is created by using two connection plates which eliminate any type of fixing holes in the slides. At the same time the adjustable slide unit with the Z-axis can, to a limited extent (vertically to the Z-axis), still be adjusted.
In the case of a slide configuration of the Z-axis parallel to the reference axis (type P) an adaptor plate (complete with a fastening set, small fixing plates and socket head cap screws) is required which is included in the set.
The small fixing plates serves for the 90° alignment of the Z-axis and fine adjustment of the adaptor plate (Type P).
All parts required to make up a set are included.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Products homepage

Data to be displayed: 30; 45; 60

Part Number
900.3-30-30-P
900.3-30-30-S
900.3-50-50-P
900.3-50-50-S
900.3-80-80-P
900.3-80-80-S
900.3-120-120-P
900.3-120-120-S

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Width b	Length l1	Type
174.06 €	1	Available	7 Days	30	30	P, Mounting the Z-axis via connecting plate and additional plate
84.88 €	1	Available	7 Days	30	30	S, Direct mounting of the Z-axis via connecting plate
174.06 €	1	Available	7 Days	50	50	P, Mounting the Z-axis via connecting plate and additional plate
84.50 €	1	Available	7 Days	50	50	S, Direct mounting of the Z-axis via connecting plate
223.76 €	1	Available	7 Days	80	80	P, Mounting the Z-axis via connecting plate and additional plate
111.82 €	1	Available	7 Days	80	80	S, Direct mounting of the Z-axis via connecting plate
337.42 €	1	Available	7 Days	120	120	P, Mounting the Z-axis via connecting plate and additional plate
166.08 €	1	Available	7 Days	120	120	S, Direct mounting of the Z-axis via connecting plate

Configure

8Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Width b
- 30
- 50
- 80
- 120
Clear
Length l1
- 30
- 50
- 80
- 120
Clear
Type
- P, Mounting the Z-axis via connecting plate and additional plate
- S, Direct mounting of the Z-axis via connecting plate
Clear
Type
- 900.3
Clear
Filter by CAD data type
- 2D
- 3D
Clear