Flanges for swivel ball joints GN 784
- Promotional pricing
- Volume Discount
The GN 784.1 flanges are mounted from below onto the GN 784 swivel ball joints GN 784. A half-length tapered groove pin prevents any rotation.
The flange enables the swivel ball joints to be mounted on the upper surface. The d2 section with the three d3 drill holes is configured so that standard screws with washers can be used.
The half-length tapered groove pin is mounted on the flange. The countersunk screw is included separately.
The flange enables the swivel ball joints to be mounted on the upper surface. The d2 section with the three d3 drill holes is configured so that standard screws with washers can be used.
The half-length tapered groove pin is mounted on the flange. The countersunk screw is included separately.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 784.1-42-MT |
| 784.1-49-MT |
| 784.1-60-MT |
| 784.1-70-MT |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Diameter d1 | |
|---|---|---|---|---|---|
13.16 € | 1 | Available | 7 Days | 42 | |
16.60 € 8.80 € | 1 | Available |
Same day
Stock | 49 | |
16.16 € 8.56 € | 1 | Available |
Same day
Stock | 60 | |
17.50 € | 1 | Available | 7 Days | 70 |
Loading...
Basic information
| Finish | MT-matte, tumbled finish |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.